Bond strength and bond stress-slip analysis of FRP bar to concrete incorporating environmental durability
Source abstract
Abstract
Interfacial bond between fibre-reinforced polymer (FRP) composite bars and the surrounding concrete is an important factor in the composite performance of FRP-reinforced concrete beams under load. When exposed to harsh environmental conditions the interfacial bond has been shown in numerous small-scale experimental studies to significantly deteriorate. It is therefore essential that the magnitude of the deterioration is quantified in order for the long-term performance of FRP-reinforced concrete (FRP-RC) members to be determined. In this study, a database consisting of 544 observations of bond strength test results as well as a sub-set database of 315 observations of bond stress-slip results is compiled and statistically analysed in order to quantify reduction factors for both the bond strength and the bond stress-slip behaviour of FRP-RC members. The outcomes of this analysis are further applied to investigate the deterioration required to cause a change in failure mode from bar rupture to bar debonding in order for the deterioration of reinforcement to be considered in reinforcement detailing requirements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Application of FRP bars as reinforcement in civil engineering structures10.1108/02630800210433837 ↗
2. Bond–slip models for FRP sheets/plates bonded to concrete10.1016/j.engstruct.2005.01.014 ↗
3. Serviceability flexural ductility of FRP RC beams: A discrete rotation approach10.1016/j.conbuildmat.2012.10.001 ↗
4. Cosenza · 1995 · 164
5. Flexural behaviour of indeterminate concrete beams reinforced with FRP bars10.1016/j.engstruct.2007.12.019 ↗
6. Bond mechanism and bond strength of GFRP bars to concrete: A review10.1016/j.compositesb.2016.04.068 ↗
7. Modeling the effect of high temperature on the bond of FRP reinforcing bars to concrete10.1016/S0958-9465(00)00043-3 ↗
8. Bond degradation of basalt fiber-reinforced polymer (BFRP) bars exposed to accelerated aging conditions10.1016/j.conbuildmat.2015.02.036 ↗
9. Bond Durability of Basalt Fiber-Reinforced Polymer Bars Embedded in Concrete under Direct Pullout Conditions
10. Mechanical properties and bond characteristics of different fiber reinforced polymer rebars at elevated temperatures10.1016/j.conbuildmat.2017.03.113 ↗
11. Evaluation of bond using FRP rods with axisymmetric deformations10.1016/S0950-0618(99)00038-0 ↗
12. Bond behavior of fiber reinforced polymer bars under direct pullout conditions10.1061/(ASCE)1090-0268(2004)8:2(173) ↗
13. Bond strength of fiber reinforced polymer rebars in normal strength concrete10.1061/(ASCE)1090-0268(2005)9:3(203) ↗
14. ACI. Guide for the Design and Construction of Structural Concrete Reinforced with Fiber-Reinforced Polymer (FRP) Bars. ACI 4401-R15. 2015;Farmington Hill, MI.
15. CSA. Design and Construction of Building Components with Fibre Reinforced Polymers. CAN/CSA S806–2. 2007;178 Rexdale blvd, Toronto, Canada.
16. JSCE. Recommendation for Design and Construction of Concrete Structures Using Continuous Fiber Reinforcing Materials. Research Committee on Continuous Fiber Reinforcing ,Materials. 1997;Japan Society of Civil Engineers, Tokyo.
17. Gravina RJ, Li J, Visintin P, Smith ST. Environmental durability of FRP bar-to-concrete bond: A critical review. Journal of Composites for Construction. In press.
18. ACI. Guide Test Methods for Fiber-Reinforced Polymers (FRPs) for Reinforcing or Strengthening Concrete Structures. 4403R-04. 2004;Farmington Hills, Mich, USA.
19. Effect of FRP bar degradation on interface bond with high strength concrete10.1016/j.cemconcomp.2008.05.006 ↗
20. Effect of aging on bond of GFRP bars embedded in concrete10.1016/j.cemconcomp.2010.02.010 ↗
21. Altalmas · 2014
22. Bond durability of basalt-fiber-reinforced-polymer (BFRP) bars embedded in concrete in aggressive environments10.1016/j.compositesb.2016.09.039 ↗
23. Experimental study on bond durability of glass fiber reinforced polymer bars in concrete exposed to harsh environmental agents: Freeze-thaw cycles and alkaline-saline solution10.1016/j.compositesb.2016.10.083 ↗
24. Bond durability of BFRP bars embedded in concrete under seawater conditions and the long-term bond strength prediction10.1016/j.matdes.2015.12.066 ↗
25. Bond durability assessment and long-term degradation prediction for GFRP bars to fiber-reinforced concrete under saline solutions10.1016/j.compstruct.2016.11.055 ↗
26. Effect of high temperature on bond strength of FRP rebars10.1061/(ASCE)1090-0268(1999)3:2(73) ↗
27. Balázs–Adorján ÉLGL, Nehme BSG. Bond of CFRP wires under elevated temperature. Bond Behaviour of FRP in Structures: Proceedings of the International Symposium on Bond Behaviour of FRP in Structures, 7-9 December 2005, Hong Kong, China: International Institute for FRP in Construction; 2005. p. 163.
28. Temperature and environmental effects on glass fibre rebar: modulus, strength and interfacial bond strength with concrete10.1016/j.compositesb.2005.01.006 ↗
29. Alvarez A, Zaidi A, Mamsoudi R. Bond slip behaviour of FRP bars under low and high temperature—experimental and theoretical studies. CDCC-2007. , Quebec, Canada2007. p. 523-30.
30. Thermal effects on GFRP rebars: experimental study and analytical analysis10.1617/s11527-009-9547-2 ↗
31. Bond strength of glass fiber-reinforced polymer bars in concrete after exposure to elevated temperatures10.1177/0731684414555408 ↗
32. Influence of moderate temperatures on the bond between carbon fibre reinforced polymer bars (CFRP) and concrete10.1016/j.conbuildmat.2015.07.053 ↗
33. Effect of high temperature on the bond performance between basalt fibre reinforced polymer (BFRP) bars and concrete10.1016/j.conbuildmat.2017.02.125 ↗
34. Mechanical properties and bond strength degradation of GFRP and steel rebars at elevated temperatures10.1016/j.conbuildmat.2018.06.203 ↗
35. Eligehausen R, Popov EP, Bertero VV. Local bond stress-slip relationships of deformed bars under generalized excitations. Proceedings of the 7th European Conference on Earthquake Engineering: Athens : Techn. Chamber of Greece; 1982.
36. AC. Acceptance criteria for concrete and reinforced and unreinforced masonry strengthening using externally bonded fiber-reinforced polymer (FRP) composite systems. AC125-10. 2010;ICC Evaluation Service, Brea, California.
37. Long-term bond performance of GFRP bars in concrete under temperature ranging from 20 °C to 80 °C10.1016/j.conbuildmat.2009.12.040 ↗
38. Combined effects of saline solution and moist concrete on long-term durability of GFRP reinforcing bars10.1016/j.conbuildmat.2012.08.021 ↗
39. An anchorage system for CFRP strips bonded to thermally shocked concrete10.1016/j.ijadhadh.2016.08.003 ↗
40. Bond-slip behavior between carbon fiber reinforced polymer sheets and heat-damaged concrete10.1016/j.compositesb.2012.09.010 ↗
41. Short-term effects of sea water on E-glass/vinylester composites10.1002/app.10571 ↗
42. Durability of FRP rods for concrete structures10.1016/j.conbuildmat.2004.04.012 ↗
43. Trejo · 2005
44. An experimental study of the mechanical properties of fibre reinforced polymer (FRP) and steel reinforcing bars at elevated temperatures10.1016/j.compstruct.2006.04.069 ↗
45. Short-term durability test for GFRP rods under various environmental conditions10.1016/j.compstruct.2007.03.005 ↗
46. Wu J, Li H, Xian G. Influence of Elevated Temperature on the Mechanical and Thermal Performance of BFRP Rebar. In: Ye L, Feng P, Yue Q, editors. Advances in FRP Composites in Civil Engineering: Proceedings of the 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Sep 27–29, 2010, Beijing, China. Berlin, Heidelberg: Springer Berlin Heidelberg; 2011. p. 69-72.
47. Experimental study on the fire resistance of RC beams strengthened with near-surface-mounted high-T g BFRP bars10.1016/j.compositesb.2014.01.011 ↗
48. Prediction of long-term performance and durability of BFRP bars under the combined effect of sustained load and corrosive solutions
49. Mechanical characterization of basalt FRP rebars and long-term strength predictive model
50. Durability of GFRP reinforcing bars embedded in moist concrete10.1061/(ASCE)1090-0268(2009)13:2(66) ↗
51. Performance of glass fiber reinforced polymer bars under elevated temperatures10.1016/j.compositesb.2012.01.034 ↗
52. Tensile properties of glass fiber-reinforced polymer bars embedded in concrete under severe laboratory and field environmental conditions
53. The tensile performance of FRP bars embedded in concrete under elevated temperatures10.1016/j.conbuildmat.2019.03.239 ↗
54. Vertical shear interaction model between external FRP transverse plates and internal steel stirrups10.1016/j.engstruct.2005.08.010 ↗
55. Full-range behavior of FRP-to-concrete bonded joints10.1016/j.engstruct.2003.11.006 ↗
56. Modelling FRP-to-substrate joints using the bilinear bond-slip rule with allowance for friction—Full-range analytical solutions for long and short bonded lengths10.1016/j.ijsolstr.2017.11.024 ↗
57. Experimental study of bond behaviour between concrete and FRP bars using a pull-out test10.1016/j.compositesb.2009.07.003 ↗