Microstructural study and surface properties of concrete pavements containing nanoparticles
Source abstract
Abstract
Abstract This investigation focused on the effect of nanoparticles on microstructural surface characteristics, abrasion, and skid resistance of concrete pavements. Firstly, the percentage of optimal replacement of nanoparticles was determined. In the second part, the nano-modified concrete similar to mortars in terms of water-to-cement and sand-to-cement ratio were made to study the abrasion resistance and British pendulum number (BPN) as skid resistance property. Mercury intrusion porosimetry (MIP), X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM) were applied to accurately evaluate the microstructural properties. Concerning concrete containing different nanoparticles, nano-montmorillonite yielded the most considerable improvement in abrasion resistance (about 23%). By examining the MIP results, a good correlation was observed between the volume of the large pores plus the average pore size and the volume reduction in the abrasion test. By comparing the effect of nanoparticles on improving the skid resistance under wet and dry conditions, it was found that the samples containing nanoparticles in dry conditions generated more significant improvements (about 20%) compared with the wet conditions (about 7%). The results of the AFM test revealed that improvement in samples containing nanoparticles was because of increased surface roughness and enhanced surface adhesion due to Van Der Waals forces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Asphalt Pavement Performance Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Taylor · 2007
2. Whitney, David, David W. Fowler, Marc Rached. Use of Manufactured Sands for Concrete Pavement. No. FHWA/TX-13/0-6255-1. 2013.3. Hall, J., Guide for Pavement Friction, Final Guide, National Cooperative Highway Research Program. Transportation Research Board, 2006.
3. Rado · 2009
4. J.A. Sherwood, Effects of concrete mixture designs on skid numbers, in: Eighth International Conference on Managing Pavement AssetsFugroFederal Highway AdministrationIntervial ChileCAF-Banco de Desarrollo de America Latina. 2011. Citeseer.
5. Abrasion resistance of cement mortar with different pozzolanic compositions and matrices10.1061/(ASCE)MT.1943-5533.0000147 ↗
6. The study of the road performance of the polypropylene fiber concrete
7. Abrasion resistance of concrete containing nano-particles for pavement10.1016/j.wear.2005.08.006 ↗
8. Zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanostructured materials for advanced electrochemical energy devices10.1016/j.pmatsci.2011.08.003 ↗
9. Water demand of amorphous nano silica and its impact on the workability of cement paste10.1016/j.cemconres.2011.10.008 ↗
10. Analyse de l'halloysite
11. Properties of concrete incorporating nano-silica10.1016/j.conbuildmat.2012.06.044 ↗
12. Effect of halloysite nanoclay on mechanical properties, thermal behavior and microstructure of cement mortars10.1016/j.cemconres.2013.03.005 ↗
13. Material properties of Portland cement paste with nano-montmorillonite10.1007/s10853-006-1462-0 ↗
14. Microstructural characterization and mechanical properties of cementitious mortar containing montmorillonite nanoparticles10.1061/(ASCE)MT.1943-5533.0001671 ↗
15. Physical and chemical effects of siliceous particles at nano, micro, and macro scales on properties of self-consolidating mortar overlays10.1016/j.conbuildmat.2018.09.068 ↗
16. Corrosion resistance of Montmorillonite-modified dense concretes10.1007/s40999-016-0111-5 ↗
17. Abrasion resistance of concrete containing SiO2 and Al2O3 nanoparticles in different curing media10.1016/j.enbuild.2011.07.022 ↗
18. Three-dimensional surface texture of Portland cement concrete pavements containing nanosilica10.1080/10298436.2016.1231520 ↗
19. ASTM C150, Standard Specification for Portland Cement, ASTM International, West Conshohocken, PA, 2007.
20. ASTM C33. Standard specification for concrete aggregate, vol. 04.02. Annual Book of ASTM Standard; 1997. pp. 132–135.
21. ASTM C494. Standard specification for chemical admixtures for concrete, Annual book of ASTM standards, Philadelphia; 04.02, 2001. pp. 261–269.
22. The pozzolanic reactivity of monodispersed nanosilica hydrosols and their influence on the hydration characteristics of Portland cement10.1016/j.cemconres.2012.09.004 ↗
23. Assessment of the interaction of polycarboxylate superplasticizers in hydrated lime pastes modified with nanosilica or metakaolin as pozzolanic reactives10.1016/j.conbuildmat.2014.09.052 ↗
24. The influence of different preparation methods on the aggregation status of pyrogenic nanosilicas used in concrete10.1617/s11527-012-9889-z ↗
25. ASTM International. (2006a). Standard practice for mechanical mixing of hydraulic cement pastes and mortars of plastic consistency, ASTM C 305–06, West Conshohocken, Pa.
26. Comparative study on effects of Class F fly ash, nano silica and silica fume on properties of high performance self compacting concrete10.1016/j.conbuildmat.2015.07.001 ↗
27. ASTM C348, Standard test method for flexural strength of hydraulic cement mortars, Annual book of ASTM standards, USA, 2002.
28. ASTM C349, Standard test method for compressive strength of hyraulic cement mortars (Using portions of prisms broken in flexure), Annual book of ASTM standards, USA, 2002.
29. ASTM C642, Standard Test method for density, absorption, and voids in hardened concrete, 1997.
30. EN 1340, Concrete kerbs units. Requirements and test methods. European Standard, 2003.
31. ASTM E303, Standard Test Method for Measuring Surface Frictional Properties using the British Pendulum Tester, 2013.
32. Direct measurement of repulsive van der Waals interactions using an atomic force microscope10.1006/jcis.1996.0326 ↗
33. Microstructure of cement mortar with nano-particles10.1016/S1359-8368(03)00052-0 ↗
34. Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO210.1016/j.cemconres.2005.07.004 ↗
35. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
36. Investigations on the preparation and mechanical properties of the nano-alumina reinforced cement composite10.1016/j.matlet.2005.08.061 ↗
37. Influence of nano-silica agglomeration on microstructure and properties of the hardened cement-based materials10.1016/j.conbuildmat.2012.08.006 ↗
38. Effect of nanosilica on mechanical and thermal properties of cement composites for thermal energy storage materials10.1016/j.egypro.2015.11.454 ↗
39. Beneficial role of nanosilica in cement based materials–a review10.1016/j.conbuildmat.2013.05.052 ↗
40. Mindess · 2003
41. Pore size distribution of hydrated cement pastes modified with polymers10.1016/S0008-8846(01)00549-X ↗
42. Effects of metakaolin, silica fume and slag on pore structure, interfacial transition zone and compressive strength of concrete10.1016/j.conbuildmat.2013.02.075 ↗
43. Gohar · 2012
44. Sound absorption and friction responses of nanoconcrete for rigid pavements10.3141/2369-10 ↗
45. Hall · 2009
46. Evidence for van der Waals adhesion in gecko setae10.1073/pnas.192252799 ↗
47. Composition of C-S–H in pastes with increasing levels of silica fume addition10.1016/j.cemconres.2015.04.016 ↗