Influence factors on using recycled concrete aggregate in foamed asphalt mixtures based on tensile strength and moisture resistance
Source abstract
Abstract
Abstract Recycle concrete aggregate (RCA) as a substituted material for foamed asphalt mixtures (FAM) can release the pressure faced by waste management departments and increase environmental benefits, but the utilization of RCA in asphalt pavement is always limited and few studies focus on recycling of RCA on FAM. To solve this problem, the characteristic of foamed asphalt mixtures with RCA was explored in this study, the six different influence factors including curing methods, bituminous type and content, RCA, cement, curing time and redbrick debris on strength and moisture susceptibility were investigated, the coupling action between RCA and the other five factors in FAM was analyzed. The results indicate that 100% with RCA as a substitute for natural aggregate can be used in FAM for base and subbase course in asphalt pavement, cement treatment improved but redbrick deteriorated the performance of FAM, RCA does not affect the length of the curing time. The specific constitution of the other five factors leads to the groove on the performance of FAM with 100% RCA. This research may help to better understand the performance of FAM with RCA and the noteworthy effects of using RCA as an alternative substitute.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Moisture damage resistance of hot-mix asphalt made with recycled concrete aggregates and crumb rubber10.1016/j.jclepro.2017.07.140 ↗
2. Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production10.1016/j.conbuildmat.2014.04.117 ↗
3. Hot mix asphalt using C&D waste as coarse aggregates10.1016/j.matdes.2010.12.058 ↗
4. Asphalt mixtures emission and energy consumption: a review10.1016/j.rser.2017.01.087 ↗
5. Mechanical and microstructural characteristics of different interfaces in cold recycled mixture containing cement and asphalt emulsion10.1016/j.jclepro.2020.120674 ↗
6. Characterization of agglomeration of reclaimed asphalt pavement for cold recycling10.1016/j.conbuildmat.2019.117912 ↗
7. Effects of the use of construction and demolition waste aggregates in cold asphalt mixtures10.1016/j.conbuildmat.2013.10.096 ↗
8. Design and performance of emulsified asphalt mixtures containing construction and demolition waste10.1016/j.conbuildmat.2019.117846 ↗
9. M. Crispino, C. Brovelli, Bitumen emulsion and foam bitumen for cold recycled and bitumen stabilized materials: a comparison based on performances, cost and safety, in: 8th Int. Conf. Manag. Pavement Assets, 2011.
10. Tensile strength bearing ratio and slake durability of class F fly ash stabilized with lime and gypsum10.1061/(ASCE)0899-1561(2006)18:1(18) ↗
11. Tensile strength and toughness of soil-cement-fly-ash composite reinforced with recyled high-density polyethylene strips10.1061/(ASCE)0899-1561(2002)14:2(177) ↗
12. P. Taylor, F. Canestrari, F. Cardone, A. Graziani, F.A. Santagata, Road materials and pavement design adhesive and cohesive properties of asphalt-aggregate systems subjected to moisture damage adhesive and cohesive properties of asphalt-aggregate systems subjected to moisture damage, 0629 (2016) 37–41.
13. S.F. Brown, D. Needham, Paper offered for the 2000 Annual Meeting of the Association of Asphalt Paving Technologists A Study of Cement Modified Bitumen Emulsion Mixtures Professor S F Brown 1 and Dr D Needham 2, (2000) 1–22.
14. Feasible use of recycled concrete aggregates and crushed clay brick as unbound road sub-base10.1016/j.conbuildmat.2005.01.045 ↗
15. Potential of recycled concrete aggregate pretreated with waste cooking oil residue for hot mix asphalt10.1016/j.jclepro.2019.02.256 ↗
16. Influence of the amount of recycled coarse aggregate in concrete design and durability properties
17. Use of recycled construction and demolition waste (CDW) aggregates: a sustainable alternative for the pavement construction industry10.1016/j.jclepro.2016.06.088 ↗
18. ASTM Standard D5, Standard Test Method for Penetration of Bituminous Materials, ASTM International, West Conshohocken, PA, 2005.
19. ASTM Standard D36, Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus), ASTM International, West Conshohocken, PA, 2006.
20. ASTM Standard D113, Standard Test Method for Ductility of Asphalt Materials, ASTM International, West Conshohocken, PA, 2017.
21. ASTM Standard D4402, Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer, ASTM International, West Conshohocken, PA, 2006.
22. ASTM Standard D6, Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds, ASTM International, West Conshohocken, PA, 2018.
23. ASTM Standard D243, Standard Test Method for Residue of Specified Penetration, ASTM International, West Conshohocken, PA, 2008.
24. AASHTO Standard T164, Standard Method of Test for Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA), 2014.
25. ASTM Standard C150. Standard Specification for Portland Cement, American Society for Testing and Materials. American Society for Testing and Materials, ASTM International, West Conshohocken, PA, USA, 2019.
26. ARRA. Recommended Mix Design Guidelines for Cold Recycling Using Foamed (Expanded) Asphalt Recycling Agents (Draft), Asphalt Recycling and Reclaiming Association, Annapolis, MD, 2016.
27. Wirtgen GmbH Wirtgen Cold Recycling Technology, Windhagen, Germany, 2012.
28. Long-term rutting and stripping characteristics of foamed warm-mix asphalt (WMA) through laboratory and field investigation10.1016/j.conbuildmat.2018.03.055 ↗
29. Influence of foaming on tribological and rheological characteristics of foamed asphalt10.1016/j.conbuildmat.2019.02.009 ↗
30. Guideline · 2009
31. Asphalt Institute. Asphalt Cold Mix Manual, Manual Series No. 14 (MS.14) (third ed.), Asphalt Institute, Lexington, KY, USA, 1997.
32. Chinese Standard JTG F41-2008. Technical Specifications for Highway Asphalt Pavement Recycling, Ministry of Transport of the People’s Republic of China, Beijing, 2008.
33. Chinese Standard JTGD50-2006. Specifications for design of highway asphalt pavement, Ministry of Transport of the People’s Republic of China, Beijing, 2006.
34. ASTM Standard D6931. Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures, American Society for Testing and Materials, ASTM International, West Conshohocken, PA, 2017.
35. British Standard EN 12697-12. Test Methods for Determination of the Water Sensitivity of Bituminous Specimens, European Committee for Standardization, British, 2009
36. Y. Kim, S. Im, H. “David” Lee, Impacts of Curing Time and Moisture Content on Engineering Properties of Cold In-Place Recycling Mixtures Using Foamed or Emulsified Asphalt, J. Mater. Civ. Eng. 23 (2011) 542–553.10.1061/(ASCE)MT.1943-5533.0000209 ↗
37. Influence of amount of recycled coarse aggregates and production process on properties of recycled aggregate concrete10.1016/j.cemconres.2007.02.002 ↗
38. The influence of curing conditions on the mechanical performance of concrete made with recycled concrete waste10.1016/j.cemconcomp.2011.04.002 ↗
39. Recycled construction and demolition waste in cold asphalt mixtures: evolutionary properties10.1016/j.jclepro.2015.08.038 ↗
40. Effects of moisture on strength and permanent deformation of foamed asphalt mix incorporating RAP materials10.1016/j.conbuildmat.2006.06.033 ↗
41. Bituminous polyurethane foams for building applications: influence of bitumen hardness10.1016/j.conbuildmat.2011.12.088 ↗
42. Laboratory study on mechanical parameters of foamed bitumen mixtures in the cold recycling technology10.1016/j.proeng.2013.04.056 ↗
43. The mechanical properties of asphalt mixtures with recycled concrete aggregates10.1016/j.conbuildmat.2009.08.046 ↗
44. ASTM Standard D4867. Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures, American Society for Testing and Materials, ASTM International, West Conshohocken, PA, 2014.
45. Experimental investigation on properties of recycled aggregate concrete with optimized Ball Milling Method10.1016/j.conbuildmat.2019.04.007 ↗
46. Performance evaluation of recycled asphalt mixtures by construction and demolition waste materials10.1016/j.conbuildmat.2016.05.117 ↗
47. Evaluation of pre-coated recycled concrete aggregate for hot mix asphalt10.1016/j.conbuildmat.2011.08.025 ↗
48. Laboratory investigation into mechanical properties of cement emulsified asphalt mortar10.1016/j.conbuildmat.2014.04.113 ↗
49. Evaluation of cement treatment of reclaimed construction and demolition waste as road bases10.1016/j.jclepro.2015.03.033 ↗
50. Degree of INFLUENCE OF ACTIVE FILLERS ON PROPERTIES OF RECYCLED MIXES WITH FOAMED ASPhalt10.3141/2095-13 ↗
51. Laboratory evaluation of the use of cement-treated construction and demolition materials in pavement base and subbase applications10.1061/(ASCE)MT.1943-5533.0001148 ↗
52. Investigation of early-stage strength for cold recycled asphalt mixture using foamed asphalt10.1016/j.conbuildmat.2016.09.126 ↗
53. Mechanical, microstructure and rheological characteristics of high performance self-compacting cement pastes and concrete containing ground clay bricks10.1016/j.conbuildmat.2012.07.114 ↗
54. Study on utilization of red brick waste powder in the production of cement-based red decorative plaster for walls10.1016/j.jclepro.2016.05.149 ↗