journal article·2020-11

Enhancing the recyclability of air-cooled high-magnesium ferronickel slag in cement-based materials: A study of assessing soundness through modifying method

Munan Zhai, Huajun Zhu, Guangwei Liang, Qisheng Wu, Changsen Zhang, Sudong Hua, Zuhua Zhang

Publisher page

Abstract

Abstract The air-cooled ferronickel slag is already selected as a raw material (aggregate) in concrete manufacturing, while the using as supplementary cementitious materials is still limited because of the high magnesium content. The objective of this study focuses on the practicality of air-cooled high-magnesium ferronickel slag (HMNS) blended Portland cement pastes, providing experimentally criterion for air-cooled HMNS's application. The different fineness on compressive strength and soundness of mixtures were investigated comprehensively. To be compared with the actual expansion of the HMNS blended Portland cement pastes, the mixtures containing MgO expansive agent addition (on the basis of the MgO content in the HMNS blended mixtures) were especially produced for autoclave expansion test. An optimum strength in practical application was obtained when the dosage of HMNS and its particle size were 20% and less than 50 μm respectively. The expansions of all mixtures were not only quite small (scattered around 0.09%) by traditional autoclave test, but the HMNS blended mixtures also exhibited the lower expansion when autoclave time is 6 h and 12 h. However, the expansive values of MgO expansive agent blended mixtures express more expansion than that of the HMNS blended mixtures in all autoclave times. This phenomenon was attributed to the form of magnesium in HMNS, where the primary phase of magnesium was clinoenstatite (MgSiO3) or forsterite (Mg2SiO4) and those phases showed inactive in this system by XRD, TGA and BSEM-EDS analyses. Therefore, HMNS used as supplementary cementitious material could not bring volume expansion, and this conclusion may present a great benefit to the recycling of HMNS in the field of construction materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Oxide Properties and Applications · Concrete and Cement Materials Research · Layered Double Hydroxides Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Global land-use change hidden behind nickel consumption10.1016/j.scitotenv.2017.02.049 ↗
2. Photocatalytic oxidation of diuron using nickel organic xerogel under simulated solar irradiation10.1016/j.scitotenv.2018.09.113 ↗
3. Reuse of nickel recovered from spent Ni–Cd batteries for the preparation of C/Ni and C/Ni/Pd layered electrodes for energy sources10.1016/j.psep.2014.02.007 ↗
4. Value added utilization of by-product electric furnace ferronickel slag as construction materials: A review10.1016/j.resconrec.2018.02.034 ↗
5. Leaching metals from saprolitic laterite ore using a ferric chloride solution10.1016/j.jclepro.2015.10.134 ↗
6. Pre-concentration of nickel in laterite ores using physical separation methods10.1016/j.mineng.2019.105892 ↗
7. Constraints and opportunities for the recycling of growing ferronickel slag in China10.1016/j.resconrec.2018.08.002 ↗
8. Geopolymer prepared with high-magnesium nickel slag: Characterization of properties and microstructure10.1016/j.conbuildmat.2014.01.038 ↗
9. Effect of ferronickel slag as fine aggregate on properties of concrete10.1016/j.conbuildmat.2019.01.187 ↗
10. Characteristics and reactivity of ferronickel slag powder10.1016/j.conbuildmat.2017.09.038 ↗
11. Evaluation of alkali-activated blast furnace ferronickel slag as a cementitious material: Reaction mechanism, engineering properties and leaching behaviors10.1016/j.conbuildmat.2018.08.182 ↗
12. Sustainable use of ferronickel slag fine aggregate and fly ash in structural concrete: Mechanical properties and leaching study10.1016/j.jclepro.2017.06.035 ↗
13. Potential soil contamination in areas where ferronickel slag is used for reclamation work10.3390/ma7107157 ↗
14. On the hydration of MgO in cement pastes hydrated up to eight years10.1016/0008-8846(85)90140-1 ↗
15. Research status and problems of harmfulness and testing methods of cement brucite
16. The effect of autoclave temperature on the expansion and hydrothermal products of high-MgO blended cements10.1016/S0008-8846(97)00202-0 ↗
17. Feasibility of stabilizing expanding property of furnace slag by autoclave method10.1016/j.conbuildmat.2014.06.082 ↗
18. Soundness and compressive strength of Portland cement blended with ground granulated ferronickel slag10.1016/j.conbuildmat.2017.02.023 ↗
19. Conversion of local industrial wastes into greener cement through geopolymer technology: A case study of high-magnesium nickel slag10.1016/j.jclepro.2016.09.147 ↗
20. Carbonation in the pore solution of metakaolin-based geopolymer10.1016/j.cemconres.2016.05.008 ↗
21. Synthesis of ferronickel slag-based geopolymers10.1016/j.mineng.2008.07.003 ↗
22. Alkali–silica reactivity of cementitious materials using ferro-nickel slag fine aggregates produced in different cooling conditions10.1016/j.conbuildmat.2015.09.039 ↗
23. Compressive strength of mortar containing ferronickel slag as replacement of natural sand10.1016/j.proeng.2017.01.410 ↗
24. Thermal properties and residual strength after high temperature exposure of cement mortar using ferronickel slag aggregate10.1016/j.conbuildmat.2018.12.068 ↗
25. Effect of sulphate exposure on mortar consisting of ferronickel slag aggregate and supplementary cementitious materials
26. Sulfate resistance of steam cured ferronickel slag blended cement mortar10.1016/j.cemconcomp.2018.12.001 ↗
27. Study on the durability of concrete with FNS fine aggregate10.1016/j.jhazmat.2019.120936 ↗
28. Feasibility of ferronickel slag powder for cementitious binder in concrete mix10.1016/j.conbuildmat.2019.02.166 ↗
29. Influence of nickel slag powders on properties of magnesium potassium phosphate cement paste10.1016/j.conbuildmat.2019.02.014 ↗
30. Standardization Administration of China, Beijing, 2007. GB 175-2007, Common Portland cement, pp. 2-4.
31. Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze–thaw cycles10.1016/j.conbuildmat.2019.03.091 ↗
32. Factors affecting co-valorization of fayalitic and ferronickel slags for the production of alkali activated materials10.1016/j.scitotenv.2020.137753 ↗
33. Standardization Administration of China, Beijing, 2011. GB/T 1346-2011, Test methods for water requirement of normal consistency, setting time and soundness of the Portland cement, pp. 1-5.
34. Properties of alkali-activated ground granulated blast furnace slag blended with ferronickel slag10.1016/j.conbuildmat.2018.10.112 ↗
35. Utilization of Ferronickel Slag as Additive in Portland Cement: A Hydration Leaching Study10.1007/s12649-015-9346-7 ↗
36. Hydration study of ternary blended cements containing ferronickel slag and natural pozzolan10.1016/j.conbuildmat.2015.02.046 ↗
37. The State Bureau of Technical Supervision, Beijing, 1992. GB/T 750-1992, Autoclave method for soundness of Portland cement
38. Synergetic effects of curing temperature and hydration reactivity of MgO expansive agents on their hydration and expansion behaviors in cement pastes10.1016/j.conbuildmat.2019.02.150 ↗
39. Re-examining the suitability of high magnesium nickel slag as precursors for alkali-activated materials10.1016/j.conbuildmat.2019.04.063 ↗
40. Investigation of the waterproof property of alkali-activated metakaolin geopolymer added with rice husk ash10.1016/j.jclepro.2019.05.111 ↗
41. Effects of calcination condition on expansion property of MgO-type expansive agent used in cement-based materials10.1016/j.cemconres.2009.09.025 ↗
42. Soundness evaluation of concrete with MgO10.1016/j.conbuildmat.2005.06.033 ↗
43. MgO expansive cement and concrete in China: Past, present and future10.1016/j.cemconres.2013.12.007 ↗
44. Expansive concrete cured in pressurized water at high temperature10.1016/S0958-9465(99)00038-4 ↗
45. The influences of quartz content and water-to-binder ratio on the microstructure and hardness of autoclaved Portland cement pastes10.1016/j.cemconcomp.2018.05.010 ↗
46. Compressive strength and microstructure of ordinary cured and autoclaved cement-based composites with mechanically activated kaolins10.1016/j.conbuildmat.2018.05.144 ↗
47. Recycling of biomass and coal fly ash as cement replacement material and its effect on hydration and carbonation of concrete10.1016/j.wasman.2019.05.044 ↗