Machine learning approaches to predict the micromechanical properties of cementitious hydration phases from microstructural chemical maps
Source abstract
Abstract
Abstract This paper demonstrates the use of normalized intensities of chemical species obtained from energy-dispersive X-ray spectroscopy (EDS) as inputs to machine learning (ML) models, in order to predict the nanoindentation moduli (M) of different phases in a cementitious matrix. Single and multi-component blends belonging to conventional and ultra-high performance (UHP) pastes are evaluated using a variety of ML models. It is shown that the relative intensities of Ca, Si, and Al can be used to accurately predict the phase moduli in well-hydrated pastes with limited microstructural complexities, using all the ML models investigated. When data sets belonging to multiple binders or those for UHP pastes consisting of multiple materials and low degrees of reaction are considered, the accuracy of ML predictions are found to be significantly lower. This is partly attributable to the presence of mixed phases with widely differing chemistry-property relationships, and the lack of data for higher stiffness phases that exaggerate the skew-sensitivity of ML models like ANN. Potential data augmentation strategies to tide over some of these effects are suggested.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Can the compressive strength of concrete be estimated from knowledge of the mixture proportions?: New insights from statistical analysis and machine learning methods10.1016/j.cemconres.2018.09.006 ↗
2. A comparison of machine learning methods for predicting the compressive strength of field-placed concrete10.1016/j.conbuildmat.2019.08.042 ↗
3. Research progress in advanced nanomechanical characterization of cement-based materials10.1016/j.cemconcomp.2018.09.016 ↗
4. A review on the mechanical properties of cement-based materials measured by nanoindentation10.1016/j.conbuildmat.2015.05.008 ↗
5. Statistical Indentation Techniques for Hydrated Nanocomposites: Concrete, Bone, and Shale10.1111/j.1551-2916.2007.02012.x ↗
6. The micromechanical signature of high-volume natural pozzolan concrete by combined statistical nanoindentation and SEM-EDS analyses10.1016/j.cemconres.2016.10.004 ↗
7. Automated coupling of NanoIndentation and Quantitative Energy-Dispersive Spectroscopy (NI-QEDS): A comprehensive method to disclose the micro-chemo-mechanical properties of cement pastes10.1016/j.cemconres.2017.08.016 ↗
8. Nanoindentation characteristics of alkali-activated aluminosilicate materials10.1016/j.cemconcomp.2010.10.005 ↗
9. Property investigation of individual phases in cementitious composites containing silica fume and fly ash10.1016/j.cemconcomp.2014.11.011 ↗
10. J. J. Chen, L. Sorelli, M. Vandamme, F.-J. Ulm and G. Chanvillard, “A Coupled Nanoindentation/SEM-EDS Study on Low Water/Cement Ratio Portland Cement Paste: Evidence for C–S–H/Ca(OH)2 Nanocomposites,” Journal of the American Ceramic Society, vol. 93, no. 5, 2010.10.1111/j.1551-2916.2009.03599.x ↗
11. Elucidating the nano-mechanical behavior of multi-component binders for ultra-high performance concrete10.1016/j.conbuildmat.2020.118214 ↗
12. E. L. Ford, C. G. Hoover, B. Mobasher and N. Neithalath, “Relating the nano-mechanical response and qualitative chemical maps of multi-component ultra-high performance cementitious binders,” Construction and Building Materials, p. Under Review, 2020.10.1016/j.conbuildmat.2020.119959 ↗
13. The nano-mechanical signature of Ultra High Performance Concrete by statistical nanoindentation techniques10.1016/j.cemconres.2008.09.002 ↗
14. Application of multiscale elastic homogenization based on nanoindentation for high performance concrete10.1016/j.advengsoft.2013.04.007 ↗
15. Inference of the phase-to-mechanical property link via coupled X-ray spectrometry and indentation analysis: Application to cement-based materials10.1016/j.cemconres.2014.09.001 ↗
16. Effect of the Ca/Si molar ratio on the micro/nanomechanical properties of synthetic CSH measured by nanoindentation
17. Combinatorial molecular optimization of cement hydrates
18. Nano-scale mechanical properties investigation of C-S-H from hydrated tri-calcium silicate by nano-indentation and molecular dynamics simulation10.1016/j.conbuildmat.2018.08.215 ↗
19. Unveiling micro-chemo-mechanical properties of C–(A)–S–H and other phases in blended-cement pastes10.1016/j.cemconres.2018.02.010 ↗
20. F. E. Bock, R. C. Aydin, C. J. Cyron, N. Huber, S. R. Kalidindi and B. Klusemann, “A Review of the Application of Machine Learning and Data Mining Approaches in Continuum Materials Mechanics,” Frontiers in Materials, vol. 6, 2019.10.3389/fmats.2019.00110 ↗
21. Optimizing the Prediction Accuracy of Concrete Compressive Strength Based on a Comparison of Data-Mining Techniques10.1061/(ASCE)CP.1943-5487.0000088 ↗
22. A Sensitivity and Robustness Analysis of GPR and ANN for High-Performance Concrete Compressive Strength Prediction Using a Monte Carlo Simulation
23. Analyzing the compressive strength of green fly ash based geopolymer concrete using experiment and machine learning approaches10.1016/j.conbuildmat.2020.118581 ↗
24. An ensemble machine learning approach for prediction and optimization of modulus of elasticity of recycled aggregate concrete10.1016/j.conbuildmat.2020.118271 ↗
25. Multi-objective optimization of concrete mixture proportions using machine learning and metaheuristic algorithms10.1016/j.conbuildmat.2020.119208 ↗
26. E. P. Koumoulos, K. Paraskevoudis and C. A. Charitidis, “Constituents Phase Reconstruction through Applied Machine Learning in Nanoindentation Mapping Data of Mortar Surface,” Journal of Composites Science, vol. 3, no. 63, 2019.10.3390/jcs3030063 ↗
27. Testing novel portland cement formulations with carbon nanotubes and intrinsic properties revelation: nanoindentation analysis with machine learning on microstructure identification10.3390/nano10040645 ↗
28. A Gaussian process machine learning model for cemented rockfill strength prediction at a diamond mine
29. Predicting Young's modulus of oxide glasses with sparse datasets using machine learning10.1016/j.jnoncrysol.2019.119643 ↗
30. Gaussian Process Regression for Predictive But Interpretable Machine Learning Models: An Example of Predicting Mental Workload across Tasks10.3389/fnhum.2016.00647 ↗
31. D. Duvenaud, H. Nickisch and C. E. Rasmussen, “Additive Gaussian Processes,” arXiv, 2011
32. Scikit-learn: machine learning in python
33. Variable selection using Gaussian process regression-based metrics for high-dimensional model approximation with limited data10.1007/s00158-018-2137-6 ↗
34. Predicting the effective mechanical property of heterogeneous materials by image based modeling and deep learning10.1016/j.cma.2019.01.005 ↗
35. Deep learning in neural networks: An overview10.1016/j.neunet.2014.09.003 ↗
36. Automated color model-based concrete detection in construction-site images by using machine learning algorithms10.1061/(ASCE)CP.1943-5487.0000141 ↗
37. T. Tieleman and G. Hinton, “Lecture 6.5 RmsProp: Divide the gradient by a running average of its recent magnitude,” COURSERA: Neural networks for machine learning, 2012.
38. Dropout: A simple way to prevent neural networks from overfitting
39. F. Chollet, “Keras,” GitHub repository, 2015. [Online]. Available: https://keras.io/api/.
40. Machine learning can predict setting behavior and strength evolution of hydrating cement systems10.1111/jace.16706 ↗
41. Microstructural packing- and rheology-based binder selection and characterization for Ultra-high Performance Concrete (UHPC)10.1016/j.cemconres.2017.10.013 ↗
42. Material design of economical ultra-high performance concrete (UHPC) and evaluation of their properties10.1016/j.cemconcomp.2019.103346 ↗
43. Fundamental insights into the compressive and flexural response of binder and aggregate-optimized ultra-high performance concrete (UHPC)10.1016/j.cemconcomp.2019.01.015 ↗
44. Experimental chemo-mechanics of early-age fracture properties of cement paste10.1016/j.cemconres.2015.04.004 ↗
45. Specimen preparation for scanning electron microscopy
46. Microscopy of clinker and hydraulic cements10.2138/rmg.2012.74.3 ↗
47. Does microstructure matter for statistical nanoindentation techniques?10.1016/j.cemconcomp.2009.08.007 ↗
48. Methodology for nanoindentation-assisted prediction of macroscale elastic properties of high performance cementitious composites10.1016/j.cemconcomp.2013.09.013 ↗
49. W. Oliver and G. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” Journal of Materials Research, vol. 7, no. 6, 1992.10.1557/JMR.1992.1564 ↗
50. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding andrefinements to methodology10.1557/jmr.2004.19.1.3 ↗
51. P. E. Stutzman, J. W. Bullard and P. Feng, “Quantitative Imaging of Clinker and Cement Microstructure,” National Institute of Standards and Technology Technical Note, vol. 1877, 2015.10.6028/NIST.TN.1877 ↗
52. Optimization of SEM-EDS to determine the C-A–S–H composition in matured cement paste samples10.1016/j.matchar.2016.11.041 ↗
53. Scanning electron microscopy imaging of hydraulic cement microstructure10.1016/j.cemconcomp.2004.02.043 ↗
54. Random Search for Hyper-Parameter Optimization
55. Nano-indentation experiment for determining mechanical properties of typical cement phases at nano/micro-scale
56. Metaheuristic-Based machine learning system for prediction of compressive strength based on concrete mixture properties and early-age strength test results10.9744/ced.20.1.21-29 ↗
57. Rasmussen · 2016
58. Improving Random Forest and Rotation Forest for highly imbalanced datasets10.3233/IDA-150789 ↗
59. Nanoindentation investigation of creep properties of calcium silicate hydrates10.1016/j.cemconres.2013.05.006 ↗
60. The nanogranular nature of C-S–H10.1016/j.jmps.2006.06.003 ↗
61. A reliable technique to determine the local mechanical properties at the nanoscale for cementitious materials10.1016/j.cemconres.2007.07.001 ↗