Electrochemical and statistical analyses of the combined effect of air-entraining admixture and micro-silica on corrosion of reinforced concrete
Source abstract
Abstract
Abstract This study aims to clarify the combined effect of air-entraining admixture (AEA) and micro-silica (MS) on the structure of cement mortar to improve the corrosion behavior of the resulting reinforced concrete. Open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), and linear polarization resistance (LPR) tests were conducted on specimens after placing them in a 3.5% chloride solution. Scanning electron microscopy (SEM) imaging was also performed to characterize the surface porosity of the specimens. In addition, a comparison study with existing studies in the literature was performed to evaluate the accuracy of the obtained results. Moreover, a statistical analysis was performed using the extreme vertices mixture method to obtain the optimal value and contribution of each influential component. The results of the experiments indicate that using up to 0.7% AEA and 10% MS as a cement replacement provides the optimal combination among the mixes of the present study, as well as in comparison with existing studies. The results of the statistical analysis indicate that the optimal responses (i.e., maximum concrete resistance against penetration (Rc), electrical charge transfer resistance of the reinforcing bar (Rct), polarization resistance (Rp), and minimum corrosion rate (CR)) are achieved for dosages of AEA and MS in the ranges of 0.60% to 0.69% and 9.31% to 9.40%, respectively. The results also show that the AEA dosage is more influential in improving the Rc, Rct, and Rp, whereas MS dosage is more influential in reducing the CR.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Concrete and Cement Materials Research · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. ANN and GEP prediction for simultaneous effect of nano and micro silica on the compressive and flexural strength of cement mortar10.1016/j.conbuildmat.2018.09.031 ↗
2. Simultaneous effect of nano and micro silica on corrosion behaviour of reinforcement in concrete containing cement strength grade of C-52510.1016/j.promfg.2018.03.062 ↗
3. Effect of porosity on predicting compressive and flexural strength of cement mortar containing micro and nano-silica by ANN and GEP10.1016/j.conbuildmat.2019.05.092 ↗
4. Effect of porosity on predicting compressive and flexural strength of cement mortar containing micro and nano-silica by multi-objective ANN modeling10.1016/j.conbuildmat.2019.03.243 ↗
5. Synergistic effects of micro-silica and nano-silica on strength and microstructure of mortar10.1016/j.conbuildmat.2017.02.115 ↗
6. Combined effects of micro-silica and nano-silica on durability of mortar10.1016/j.conbuildmat.2017.09.105 ↗
7. The effect of fly ash and silica fume on mechanical properties and durability of coral aggregate concrete10.1016/j.conbuildmat.2018.06.097 ↗
8. Properties of portland cement concrete containing fly ash and condensed silica-fume10.1016/0008-8846(82)90019-9 ↗
9. Effect of mineral additions incorporated in concrete on thermodynamic and kinetic parameters of chloride-induced reinforcement corrosion10.1016/j.conbuildmat.2018.10.100 ↗
10. Digital image correlation to characterize the flexural behavior of lightweight ferrocement slab panels10.1016/j.conbuildmat.2018.09.079 ↗
11. Chloride threshold for rebar corrosion in concrete with addition of silica fume10.1016/j.corsci.2007.07.007 ↗
12. Effect of silica fume and steel slag coarse aggregate on the corrosion resistance of steel bars10.1016/j.conbuildmat.2017.08.111 ↗
13. Utilization of silica fume in concrete: Review of durability properties10.1016/j.resconrec.2011.09.016 ↗
14. Air-void structure, strength, and permeability of wet-mix shotcrete before and after shotcreting operation: The influences of silica fume and air-entraining agent10.1016/j.cemconcomp.2016.03.012 ↗
15. Prediction of long-term chloride diffusion in silica fume concrete in a marine environment10.1016/j.cemconcomp.2015.03.006 ↗
16. Influence of silica fume addition on concretes physical properties and on corrosion behaviour of reinforcement bars10.1016/S0958-9465(02)00120-8 ↗
17. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
18. Influence of air entraining agents on deicing salt scaling resistance and transport properties of high-volume fly ash concrete10.1016/j.cemconcomp.2013.01.005 ↗
19. Mechanical, rheological and morphological analysis of cement-based composites with a new LAS-based air entraining agent10.1016/j.conbuildmat.2017.04.024 ↗
20. Chloride ion diffusivity of fly ash and silica fume concretes exposed to freeze–thaw cycles10.1016/j.conbuildmat.2010.02.015 ↗
21. Effect of Air Entraining Admixture on Concrete under Temperature Changes in Freeze and Thaw Cycles
22. Ultrafine GGBS and calcium nitrate as concrete admixtures for improved mechanical properties and corrosion resistance10.1016/j.conbuildmat.2018.06.096 ↗
23. Influence of Unsupported Concrete Media in Corrosion Assessment for Steel Reinforcing Concrete by Electrochemical Impedance Spectroscopy10.1016/j.electacta.2013.11.157 ↗
24. Detection and identification of concrete cracking during corrosion of reinforced concrete by acoustic emission coupled to the electrochemical techniques10.1016/j.ndteint.2005.04.007 ↗
25. Corrosion measurements of steel reinforcement in concrete exposed to a tropical marine atmosphere10.1016/S0008-8846(01)00713-X ↗
26. The corrosion investigation of rebar embedded in the fibers reinforced concrete10.1016/j.conbuildmat.2012.04.051 ↗
27. Cost-safety optimization of steel-concrete composite beams using standardized formulation10.1016/j.jestch.2018.09.005 ↗
28. Effect of cement strength class on the prediction of compressive strength of cement mortar using GEP method10.1016/j.conbuildmat.2018.11.265 ↗
29. Tuning DOS measuring parameters based on double-loop EPR in H2SO4 containing KSCN by Taguchi method10.1016/j.corsci.2010.04.015 ↗
30. Optimizing pervious concrete pavement mixture design by using the Taguchi method10.1016/j.conbuildmat.2015.10.094 ↗
31. Computational design optimization of concrete mixtures: A review10.1016/j.cemconres.2018.04.007 ↗
32. Medium strength self-compacting concrete containing fly ash: Modelling using factorial experimental plans10.1016/j.cemconres.2003.12.022 ↗
33. An extreme vertices mixture design approach to the optimization of methylal production process using p-toluenesulfonic acid as catalyst10.1016/j.cherd.2016.06.012 ↗
34. Liquid-liquid Extraction of Naphthalene. Application of a Mixture Design and Optimization10.1016/j.egypro.2013.07.140 ↗
35. Extreme vertices design of concrete with combined mineral admixtures10.1016/S0008-8846(99)00069-1 ↗
36. Huang, W.R., et al. Permeability of Concrete Containing Air-Entraining and Mineral Admixtures. in Advanced Materials Research. 2011. Trans Tech Publ10.4028/www.scientific.net/AMR.250-253.425 ↗
37. ANN prediction of cement mortar compressive strength, influence of cement strength class10.1016/j.conbuildmat.2017.01.132 ↗
38. Durability of metakaolin concrete to sulfate attack10.1016/j.cemconres.2006.03.026 ↗
39. Impact of Concrete Placing Method on Air Content, Air-Void System Parameters, and Freeze-Thaw Durability10.1177/0361198196153200101 ↗
40. Characterization of ferrocement slab panels containing lightweight expanded clay aggregate using digital image correlation technique10.1016/j.conbuildmat.2018.06.024 ↗
41. Genetic prediction of cement mortar mechanical properties with different cement strength class after freezing and thawing cycles10.1002/suco.201700196 ↗
42. Effect of cement strength class on the generalization of Abrams' law10.1002/suco.201700275 ↗
43. Application of sensitivity analysis in the life cycle design for the durability of reinforced concrete structures in the case of XC4 exposure class10.1016/j.cemconcomp.2017.11.024 ↗
44. Neville, A.M., Properties of concrete. Vol. 4. 1995: Longman London.
45. ASTM, Standard test method for determining the percentage of fractured particles in coarse aggregate. 2013.
46. ASTM, C., 494. Standard specification for chemical admixtures for concrete, 1999. 4
47. Standard, A., C136/C136M-14, 2015. Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, 2014.
48. ASTM, C., 260. Standard Specification for Air-Entraining Admixtures for Concrete. 2001, West Conshohocken, PA: ASTM International.
49. Neville · Properties of Concrete · 2011 · 687: · 331
50. Chloride penetration and electrical resistivity of concretes containing nanosilica hydrosols with different specific surface areas10.1016/j.cemconcomp.2014.06.006 ↗
51. Use of AC impedance technique in studies on steel in concrete in immersed conditions
52. Corrosion rates of steel in concrete10.1016/0008-8846(86)90051-7 ↗
53. Steel corrosion in concretes deteriorated by chlorides and sulphates: Electrochemical study using impedance spectrometry and ‘stepping down the current” method10.1016/0008-8846(92)90136-J ↗
54. Performance of Steel Reinforcement in Portland Cement and High-Volume Fly Ash Concretes
55. An estimation of the diffusivity of silica fume concrete10.1016/j.buildenv.2005.11.019 ↗
56. Chloride-induced corrosion on reinforcing steel: from the fundamentals to the monitoring techniques10.1016/S0958-9465(02)00089-6 ↗
57. Assignment of features in impedance spectra of the cement-paste/steel system10.1016/S0008-8846(98)00156-2 ↗
58. Lay, P., et al., An ac impedance study of steel in concrete. Journal of applied electrochemistry, 1985. 15(5): p. 755-76610.1007/BF00620572 ↗
59. Madej, D., A new implementation of electrochemical impedance spectroscopy (EIS) and other methods to monitor the progress of hydration of strontium monoaluminate (SrAl 2 O 4) cement. Journal of Thermal Analysis and Calorimetry: p. 1-12.
60. Bertolini · 2004
61. Broomfield, J.P., Corrosion of steel in concrete: understanding, investigation and repair. 2003: CRC Press.10.1201/9781482265491 ↗
62. Improving corrosion resistance of steel rebars in concrete with marble and granite waste dust as partial cement replacement10.1016/j.conbuildmat.2018.07.066 ↗
63. An assessment of the relative permeability of cement systems using AC impedance techniques10.1016/S0008-8846(99)00093-9 ↗
64. Standard · 1998
65. The inhibition activity of ascorbic acid towards corrosion of steel in alkaline media containing chloride ions10.1016/j.corsci.2008.06.018 ↗
66. A comparative study of electrochemical techniques in investigating the adsorption behaviour of fibrinogen on platinum10.1016/j.jelechem.2010.04.004 ↗
67. ASTM, C., Standard test method for density, absorption, and voids in hardened concrete. C642-13, 2013
68. Combined usage of micro-silica and nano-silica in concrete: SP demand, cementing efficiencies and synergistic effect10.1016/j.conbuildmat.2018.02.181 ↗
69. Effect of nano and micro-silica on bond behaviour of steel and polypropylene fibres in high volume fly ash mortar10.1016/j.conbuildmat.2016.04.090 ↗
70. Influence of nano-silica addition on durability of UHPC10.1016/j.conbuildmat.2015.07.009 ↗
71. Challenges and opportunities in corrosion of steel in concrete10.1617/s11527-017-1131-6 ↗
72. Electrochemistry and capillary condensation theory reveal the mechanism of corrosion in dense porous media10.1038/s41598-018-25794-x ↗
73. Carbonation of low-alkalinity mortars: Influence on corrosion of steel and on mortar microstructure10.1016/j.cemconres.2017.08.013 ↗
74. Corrosion behaviour of steel rebars in reinforced concrete containing thermoplastic wastes as aggregates10.1016/j.conbuildmat.2012.12.043 ↗
75. Effect of mill scale on the long-term corrosion resistance of a low-alloy reinforcing steel in concrete subjected to chloride solution10.1016/j.conbuildmat.2017.12.125 ↗
76. Corrosion mitigation of steel rebars in chloride contaminated concrete pore solution using inhibitor: An electrochemical investigation10.1016/j.conbuildmat.2018.04.069 ↗
77. Stray current induced corrosion of steel fibre reinforced concrete10.1016/j.cemconres.2017.08.004 ↗
78. Compressive strength and corrosion evaluation of concretes containing pozzolana and perlite immersed in aggressive environments10.1016/j.conbuildmat.2018.05.190 ↗
79. Chloride-induced corrosion of steel rebars in simulated pore solutions of alkali-activated concretes10.1016/j.cemconres.2017.08.006 ↗
80. Concentration monitoring and performance of a migratory corrosion inhibitor in steel-reinforced concrete10.1016/j.cemconres.2004.01.019 ↗
81. Corrosion rate of ordinary and high-performance concrete subjected to chloride attack by AC impedance spectroscopy10.1016/j.conbuildmat.2005.01.062 ↗
82. Effect of Air Entraining Admixture on Corrosion of Reinforced Concrete10.1016/j.proeng.2016.07.261 ↗
83. Software · 2017
84. Structural response of ferrocement panels incorporating lightweight expanded clay and perlite aggregates: Experimental, theoretical and statistical analysis10.1016/j.engstruct.2019.03.038 ↗
85. Corrosion behavior and optimization of air-entrained reinforced concrete, incorporating microsilica10.1002/suco.201800058 ↗