Pullout resistance of crimped reinforcing fibers using cold-drawn NiTi SMA wires
Source abstract
Abstract
Abstract This paper assesses the bond strength of crimped fibers manufactured by a cold-drawn SMA wire using a continuous method. Several pullout tests are conducted to study bond strength and crack-closing ability of crimped SMA wire. Before and after SMA heating, the pullout force–displacement relationships of crimped fibers are compared with different types of end-shapes, namely, straight and paddled end, to measure the bond strength of these fibers in cementitious composite material. The cold drawn fiber with more than 4% area reduction ratio due to cold drawing work should be used for producing crimped fibers to overcome the stretching effect of indentation by heating. The paddled fibers show almost twice energy dissipation capacity than the crimped fibers, while secant stiffnesses of the crimped fibers are larger by 20% on the maximum than those of the paddled fibers. Crack-closing ability of crimped fibers may be evaluated when the stretching effect at the bent parts due to thermal expansion are compared with recovery effect of prestrain due to shape memory effect. The experimental data reveals the efficiency and applicability of the crimped SMA fibers in contrast to other end-shape SMA fibers provided by discontinuous methods.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Structural Behavior of Reinforced Concrete · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Self-prestressing using iron-based shape memory alloy for flexural strengthening of reinforced concrete beams10.14359/51689455 ↗
2. An experimental study on self-centering and ductility of pseudo-elastic shape memory alloy fiber reinforced beam and beam-column joint specimens10.1617/s11527-015-0538-1 ↗
3. Self-repairing performance of concrete beams strengthened using superelastic SMA wires in combination with adhesives released from hollow fibers10.1088/0964-1726/17/2/025020 ↗
4. Analysis on factors affecting the self-repair capacity of SMA wire concrete beam10.1155/2013/138162 ↗
5. An analytical study on the bending of prismatic SMA beams10.1088/0964-1726/24/12/125035 ↗
6. Superelastic SMA-FRP composite reinforcement for concrete structures10.1088/0964-1726/19/2/025011 ↗
7. Pullout behavior of superelastic SMA fibers with various end-shapes embedded in cement mortar10.1016/j.conbuildmat.2018.02.070 ↗
8. A new experimental investigation into the effects of reinforcing mortar beams with superleastic SMA fibers on controlling and closing cracks10.1016/j.compositesb.2017.11.017 ↗
9. Displacement-recovery-capacity of superelastic SMA fibers reinforced cementitious materials
10. Behavior of mortar beams with randomly distributed superelastic shape memory alloys fibers10.1177/1045389X17721029 ↗
11. Micromechanics of stress transfer in shape memory alloy three phase composite10.1177/1045389X18783086 ↗
12. Smart prestressing with shape memory alloy10.1061/(ASCE)0733-9399(1998)124:10(1121) ↗
13. Development of prestressed concrete using Fe-Mn-Si-based shape memory alloys containing NbC10.2320/matertrans.47.580 ↗
14. Crack-closing of cement mortar beams using NiTi clod-drawn SMA short fibers
15. Crack-closing performance of NiTi and NiTiNb fibers in cement mortar beams using shape memory effects10.1016/j.compstruct.2018.03.080 ↗
16. Review of current trends in research and applications of sandwich structures10.1016/j.compositesb.2018.01.027 ↗
17. Repairing cracks developed in mortar beams reinforced by cold-drawn NiTi or NiTiNb SMA fibers
18. Experiment of beam crack repair using shape memory alloy10.4028/www.scientific.net/AMM.71-78.1707 ↗
19. Prestressing effect of cold-drawn short NiTi SMA fibres in Steel reinforced mortar beams10.1088/0964-1726/25/8/085041 ↗
20. Feasibility of concrete prestressed by shape memory alloy short fibers10.1007/BF02479551 ↗
21. Seismic protection of lap-spliced RC columns using SMA wire jackets10.1680/macr.10.00181 ↗
22. Analytical solution for twinning deformation effect of pre-strained shape memory effect beam-columns10.1177/1045389X19862380 ↗
23. The confining effectiveness of NiTiNb and NiTi SMA wire jackets for concrete10.1088/0964-1726/19/3/035024 ↗
24. Fiber-type effects on the performance of steel fiber reinforced concrete
25. Bond tests to evaluate the effectiveness of anchoring devices for CFRP sheets epoxy bonded over masonry elements10.1016/j.compositesb.2017.01.042 ↗
26. Effect of mortar fineness and adhesive agents on pullout resonse of steel fibers
27. Fiber pullout behavior of HPFRCC: effects of matrix strength and fiber type10.1016/j.compstruct.2017.04.064 ↗
28. Impact resistance, microstructures and diital image processing on self-compacting concrete with hooked end and crimped steel fiber10.1016/j.conbuildmat.2019.06.001 ↗
29. Understanding the effects of hooked-end steel fibre geometry on the uniaxial tensile behavior of self-compacting concrete10.1016/j.conbuildmat.2018.05.191 ↗
30. Enhancement of interfacial bonding strength of SMA smart composites by using mechanical indented method10.1016/j.compositesb.2016.08.033 ↗
31. Experimental study on seismic behaviours of hybrid FRP–steel-reinforced ECC–concrete composite columns
32. Design of pull-out stresses for prestrained SMA wire/polymer hybrid composites10.1016/j.compositesb.2004.04.002 ↗
33. N. Shajil, S.M. Srinivasan, M. Santhanam, Self-centering of shape memory alloy fiber reinforced cement mrtar members subjected to strong cyclic loading. Mater. Struct. 46, 651–661.10.1617/s11527-012-9923-1 ↗
34. Investigating self-centering capacity of superelastic shape memory alloy fibers with different anchorages through pullout tests10.1166/jnn.2018.15635 ↗
35. Bond-slip characteristics of SMA reinforcing fibers obtained by pull-out tests10.1016/j.materresbull.2014.04.060 ↗
36. Monotonic and hysteretic pullout behavior of superelastic SMA fibers with different anchorages10.1016/j.compositesb.2016.09.080 ↗
37. Large size superelastic SMA bars: heat treatment strategy, mechanical property and seismic application
38. Superelastic NiTi SMA cables: Thermal-mechanical behavior, hysteretic modelling and seismic application10.1016/j.engstruct.2019.01.049 ↗
39. On precipitation kinetics in TiNi shape memory alloys10.1016/S1359-6462(01)01082-X ↗
40. Thermal processing of polycrystalline NiTi shape memory alloys10.1016/j.msea.2005.05.102 ↗