Insight into the mode I and mode II fracture toughness of the cemented backfill-rock interface: Effect of time, temperature and sulphate
Source abstract
Abstract
Abstract Fracture toughness is a key parameter in determining the stability of interlaminar structures. The interface between the cemented paste backfill (CPB) and the adjacent rock mass, which is one of the key controlling factors of the mechanical stability of a CPB structure, is regarded as an interlaminar structure. Fractures (mode-I, mode-II) can occur and propagate along this interface, thereby jeopardizing the stability of the CPB structure. In other words, assessing the fracture toughness of CPB-rock interface is essential for the stability analysis of CPB structures. Although many studies have been conducted on the fracture toughness of brittle materials, the evolution of the modes I & II fracture toughness of the interface between the cemented paste backfill (CPB) material and rock still remains unknown. Given the significant effect of curing time, temperature and sulphate ions on the binder hydration, it is necessary to study the evolution of the modes I & II fracture toughness of the CPB/rock interface under different thermal and chemical conditions. Therefore, many semi-circular samples (with or without sulphate ions) were produced and cured at 2 °C, 20 °C, and 35 °C for 3 days, 7, 14 and 28 days in this study. Thereafter, all specimens were subjected to semi-circular bend (SCB) tests. The obtained results show that both temperature and sulphate ions have considerable effects on the evolution of the modes I & II fracture toughness. Generally, the modes I & II fracture toughness rises as the temperature is increased (with an exception of the samples cured at 35 °C for 28 days). Nevertheless, the influences of sulphate ions on the growth of the modes I & II fracture toughness vary with the age of samples and the initial contents of sulphate ions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tailings Management and Properties · Rock Mechanics and Modeling · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Experimental and numerical investigations on fracture process zone of rock–concrete interface10.1111/ffe.12558 ↗
2. Numerical simulation of mixed-mode progressive delamination in composite materials10.1177/0021998303034505 ↗
3. Estimation of fracture toughness of anisotropic rocks by semi-circular bend (SCB) tests under water vapor pressure10.1007/s00603-014-0665-y ↗
4. ISRM-suggested method for determining the mode I static fracture toughness using semi-circular bend specimen10.1007/s00603-013-0422-7 ↗
5. Experimental Study of Cracking Characteristics of Kowloon Granite Based on Three Mode I Fracture Toughness Methods
6. Cohesive zone modes and impact damage predictions for composite structures10.1007/s11012-015-0221-1 ↗
7. A coupled chemo-elastic cohesive zone model for backfill-rock interface10.1016/j.compgeo.2020.103666 ↗
8. Mixed-mode bending method for delamination testing10.2514/3.25204 ↗
9. Mixed-mode cohesive-zone modes for fracture of an adhesively bonded polymer–matrix composite10.1016/j.engfracmech.2005.07.004 ↗
10. ISRM. The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Ulusay R, Hudson JA (eds) Suggested methods prepared by the commission on testing methods. International Society for Rock Mechanics, Compilation Arranged by the ISRM Turkish National Group, Ankara, Turkey, 2007.
11. On the use of Brazilian disc specimen for calculating mixed mode I-II fracture toughness of rock materials10.1016/j.engfracmech.2008.06.018 ↗
12. On determination of mode II fracture toughness using semi-circular bend specimen10.1016/j.ijsolstr.2005.07.049 ↗
13. Microcrack modeling of Brazilian tensile tests with the boundary element method10.1016/j.ijrmms.2008.11.007 ↗
14. Mixed mode I/II brittle fracture evaluation of marble using SCB specimen10.1016/j.proeng.2011.04.054 ↗
15. A contribution to understanding the hardening process of cemented pastefill10.1016/j.mineng.2003.10.022 ↗
16. Strength development of paste backfill simples at Long term using different binders
17. Shear behaviour of cemented pastefill-rock interfaces10.1016/j.enggeo.2008.04.010 ↗
18. Shear behavior of the interface between rock and cemented backfill: effect of curing stress, drainage condition and backfilling rate10.1007/s00603-019-01909-2 ↗
19. Behavior of cemented paste backfill in two mine stopes: Measurements and modeing10.1061/(ASCE)GT.1943-5606.0000418 ↗
20. B.R. Liliana, Influence of surface roughness on the shear strength of paste fill-rock walls interfaces. Dissertation for the master’s degree in Mining and Geological Engineering, 2018, University of Lisbon, Portugal.
21. Effects of curing temperature on the shear behaviour of cemented paste backfill-rock interface10.1016/j.ijrmms.2018.10.024 ↗
22. Chemically induced changes in the shear behaviour of the interface between rock and tailings backfill undergoing cementation10.1007/s00603-019-01757-0 ↗
23. Cemented paste backfill for mineral tailings management: Review and future perspectives10.1016/j.mineng.2019.106025 ↗
24. Anderson · 2017
25. Fracture Mechanics, 2-nd Edition
26. A numerical approach to the complete stress-strain curve of concrete10.1016/0008-8846(73)90096-3 ↗
27. Fracture parameters for a cracked semi-circular specimen10.1016/j.ijrmms.2004.03.014 ↗
28. Fracture testing of a soft rock with semi-circular specimens under three-point bending. Part 1—mode I
29. Estimating Joint Roughness Coefficients10.1016/0148-9062(79)90241-9 ↗
30. Gani · 1997
31. Properties of concrete, 5th Edition
32. Reactivity and mineralogical evolution of an underground mine sulphidic cemented paste backfill10.1016/j.mineng.2005.10.006 ↗
33. New kinetic mode to quantify the internal sulfate attack in concrete10.1016/j.cemconres.2012.09.010 ↗
34. A microstructural hydration mode for cemented paste backfill considering internal sulfate attacks10.1016/j.conbuildmat.2019.03.222 ↗
35. Review of variables that influence measured concrete compressive strength10.1061/(ASCE)0899-1561(1991)3:2(95) ↗
36. Differential scanning calorimetry study of ordinary Portland cement10.1016/S0008-8846(99)00128-3 ↗
37. Investigation of blended cement hydration by isothermal calorimetry and thermal analysis10.1016/j.cemconres.2004.10.027 ↗
38. Yield stress of cemented paste backfill in sub-zero environments: experimental results10.1016/j.mineng.2016.03.014 ↗
39. Effects of limestone fillers on surface free energy and electrical conductivity of the interstitial solution of cement mixes10.1016/j.cemconcomp.2013.09.014 ↗
40. Unsaturated soil-cement interface behaviour in direct shear tests
41. Interface Behavior from Suction-Controlled Direct Shear Test on Completely Decomposed Granitic Soil and Steel Surfaces10.1061/(ASCE)GM.1943-5622.0000658 ↗
42. Metha · 1986
43. Cemented paste backfill of sulphide-rich tailings: Importance of binder type and dosage10.1016/j.cemconcomp.2009.01.008 ↗
44. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗
45. Experimental characterisation of the influence of mill tailings fineness and density on the quality of cemented paste backfill10.1016/j.mineng.2004.05.012 ↗
46. Development of microstructures in plain cement pastes hydrated at different temperatures10.1016/0008-8846(91)90044-I ↗
47. The microstructure and mechanical properties of blended cements hydrated at various temperatures10.1016/S0008-8846(01)00471-9 ↗
48. Effect of mixing and curing temperature on concrete strength
49. Later-age strength prediction by a modified maturity mode
50. Pore structure of plain cement pastes hydrated at different temperatures10.1016/0008-8846(90)90055-3 ↗
51. A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill10.1016/j.enggeo.2010.05.016 ↗
52. Combined influence of sulphate and temperature on the saturated hydraulic conductivity of hardened cemented paste backfill10.1016/j.cemconcomp.2013.03.015 ↗
53. Sulphate effect on the early age strength and self-desiccation of cemented paste backfill10.1016/j.conbuildmat.2015.12.124 ↗
54. Yilmaz · 2017
55. Effect of gypsum on the hydration and strength of C3S pastes10.1111/j.1151-2916.1976.tb10935.x ↗
56. Effect of gypsum on the hydration and strength development of commercial Portland cements containing alkali sulfates10.1016/0008-8846(77)90085-0 ↗
57. R. Barbarulo, Comportement des matériaux cimentaires: actions des sulfates et de la temperature. Ph.D. Dissertation, Université Laval, Canada, 2002.
58. Freezing behaviour of cemented paste backfill material in column experiments10.1016/j.conbuildmat.2017.05.002 ↗
59. Strength development and sorptivity tailings shotcrete under various thermal and chemical loads
60. Coupled thermo-chemical effects on the strength development on Slag-Paste backfill materials10.1061/(ASCE)MT.1943-5533.0000192 ↗
61. Coupled effect of sulphate and temperature on the strength development of cemented backfill tailings: Portland cement paste backfill10.1016/j.cemconcomp.2010.08.002 ↗
62. A brittle fracturing material10.1007/BF02473662 ↗
63. F. Hassani, J.F. Archibald, Mine backfill. Canadian Institute of Mining, Metallurgy and Petroleum, Montréal, Que., Canada, 1998.