journal article·2021-01

Strength characteristics of spent coffee grounds and oyster shells cemented with GGBS-based alkaline-activated materials

Trung-Tri Le, Sung-Sik Park, Jun-Cheol Lee, Dong-Eun Lee

Publisher page

Abstract

Abstract This study examined the use of by-product materials such as spent coffee grounds (SCGs), oyster shell (OS), and ground-granulated blast furnace slag (GGBS) for geotechnical applications. To improve the granular skeletons of the highly compressive particles of SCG, the OS were added to a mixture in forms of grinding powder (OS.P) or crushed-granular (OS.G) acting as fill factor in terms of physical interaction, whereas GGBS was only precursor material for alkali-activated materials (AAMs). The OS.P and OS.G were employed at various OS:SCG ratios, by weight. The mixtures were cemented using GGBS-based AAMs activated by a sodium hydroxide solution (SH) and a mixture of sodium hydroxide and sodium silicate (SS). From the test results, several factors that affected the strength development of the samples have been observed, such as the curing time, type of alkaline solution, temperature variation, as well as form and ratio of OS. At the same curing conditions, the SS solution exhibited better strength compared with SH as significant contents of sodium (Na2O) and silicate (SiO2) were provided for the mixture. During the curing period, the temperature variation strongly affected the strength development of the samples. Generally, the strength and stiffness of the samples were improved by the incorporation of SCG with OS.P or OS.G, whereas the slake durability indices were maintained at very high to extremely high values, regardless of the OS type. The maximum unconfined compressive strength (UCS) value reached approximately 2.8 MPa, with optimal ratios of OS.P or OS.G of 0.3 or 0.5, respectively, compared with the SCG weight. At a given ratio, the blend mixture of OS.G and SCG generally exhibited better stiffness and a slightly lower unit weight than OS.P. The mineralogical and microstructure analyses revealed that there was no chemical reaction among SCG, OS.P, and OS.G particles, indicating that these materials act as fillers. In addition, the produced C–S–H gel acts as the dominant binder in this study. Moreover, the excessive addition of OS.P or OS.G caused negative results in strength and durability due to the poor bonding effects between the SCG and OS particles in granular skeletons. Thus, the addition of 50% of OS.G compared with the amount of SCG, by weight, was proposed as the optimal ratio for practical applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Materials Engineering and Processing · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Low-Carbon Transition in the Cement Industry
2. V.D. Glukhovsky, G.. Rostovskaja, G.V. Rumyna, High strength slag-alkaline cements, in: 7th Int. Congr. Chem. Cem. Vol. 3, 1980.
3. Alkali-activated binders: A review10.1016/j.conbuildmat.2007.10.015 ↗
4. Alkali-activated fly ashes10.1016/S0008-8846(98)00243-9 ↗
5. J.I. Escalante-García, A.F. Fuentes, A. Gorokhovsky, P.E. Fraire-Luna, G. Mendoza-Suarez, Hydration products and reactivity of blast-furnace slag activated by various alkalis, J. Am. Ceram. Soc. (2003). https://doi.org/10.1111/j.1151-2916.2003.tb03623.x.S10.1111/j.1151-2916.2003.tb03623.x ↗
6. Geopolymers: Inorganic polymeric new materials10.1007/BF01912193 ↗
7. Factors affecting the strength of alkali-activated slag10.1016/0008-8846(94)90026-4 ↗
8. A model for the C-A-S-H gel formed in alkali-activated slag cements10.1016/j.jeurceramsoc.2011.04.036 ↗
9. Alkali activation of a slag at ambient and elevated temperatures10.1016/j.cemconcomp.2011.08.003 ↗
10. Effects of activator characteristics on the reaction product formation in slag binders activated using alkali silicate powder and NaOH10.1016/j.cemconcomp.2012.03.006 ↗
11. Binding mechanism and properties of alkali-activated fly ash/slag mortars10.1016/j.conbuildmat.2012.11.003 ↗
12. Stabilization of a residual granitic soil using various new green binders10.1016/j.conbuildmat.2019.07.019 ↗
13. Effects of the type of activator on the self-healing ability of fiber-reinforced alkali-activated slag-based composites at an early age10.1016/j.conbuildmat.2019.07.113 ↗
14. Sustainable management of coffee industry by-products and value addition—A review10.1016/j.resconrec.2012.06.005 ↗
15. Spent coffee grounds: A review on current research and future prospects10.1016/j.tifs.2015.04.012 ↗
16. B. Naturals, O. Milds, Monthly Coffee Market Report (2019/20), in: International Coffee Organization (ICO), Londom, UK, 2020. http://www.ico.org/Market-Report-19-20-e.asp.
17. Spent Coffee Grounds–Fly Ash Geopolymer Used as an Embankment Structural Fill Material10.1061/(ASCE)MT.1943-5533.0001496 ↗
18. Strength assessment of spent coffee grounds-geopolymer cement utilizing slag and fly ash precursors10.1016/j.conbuildmat.2016.04.021 ↗
19. Engineering and environmental evaluation of spent coffee grounds stabilized with industrial by-products as a road subgrade material10.1007/s10098-016-1188-x ↗
20. Strength and microstructure properties of spent coffee grounds stabilized with rice husk ash and slag geopolymers10.1016/j.conbuildmat.2017.04.103 ↗
21. Compressive strength and microstructural properties of spent coffee grounds-bagasse ash based geopolymers with slag supplements10.1016/j.jclepro.2017.06.171 ↗
22. Recycled glass as a supplementary filler material in spent coffee grounds geopolymers10.1016/j.conbuildmat.2017.06.050 ↗
23. Stiffness and strength properties of spent coffee grounds-recycled glass geopolymers10.1080/14680629.2017.1408483 ↗
24. Environmental and economic viability of Alkali Activated Material (AAM) comprising slag, fly ash and spent coffee ground10.1080/19397038.2018.1492043 ↗
25. Shear strength and compressibility of oyster shell–sand mixtures10.1007/s12665-009-0304-1 ↗
26. Engineering properties of controlled low-strength materials containing waste oyster shells10.1016/j.conbuildmat.2013.04.020 ↗
27. Study of the material properties of fly ash added to oyster cement mortar10.1016/j.conbuildmat.2012.11.021 ↗
28. Using oyster-shell foamed bricks to neutralize the acidity of recycled rainwater10.1016/j.conbuildmat.2014.04.101 ↗
29. Properties of cement-based bricks with oyster-shells ash10.1016/j.jclepro.2014.12.023 ↗
30. Early-Age Strength of Alkali-Activated Slag Mortar Based on Burned Oyster Shell and Other Chemical Activators10.1061/(ASCE)MT.1943-5533.0002838 ↗
31. Chemically Induced Calcium Carbonate Precipitation for Improving Strength of Sand10.1061/(ASCE)MT.1943-5533.0003318 ↗
32. A Simplified Approach of Determining the Specific Gravity of Soil Solids10.1007/s10706-012-9521-6 ↗
33. Chemical, Functional, and Structural Properties of Spent Coffee Grounds and Coffee Silverskin10.1007/s11947-014-1349-z ↗
34. Transformation of Calcite to Aragonite by Grinding10.1063/1.1743198 ↗
35. Polycrystalline calcite to aragonite transformation kinetics: experiments in synthetic systems10.1007/s00410-004-0574-2 ↗
36. Application of alkali-activated slag concrete in railway sleepers10.1016/j.matdes.2014.12.051 ↗
37. H. Taghvayi, K. Behfarnia, M. Khalili, The effect of alkali concentration and sodium silicate modulus on the properties of alkali-activated slag concrete, J. Adv. Concr. Technol. 16 (2018). https://doi.org/10.3151/jact.16.293.10.3151/jact.16.293 ↗
38. ASTM D4644-16, Standard Test Method for Slake Durability of Shales and Other Similar Weak Rock, ASTM. (2016). https://doi.org/10.1520/D4644-16.10.1520/D4644-16 ↗
39. J.A. Franklin, R. Chandra, The slake-durability test, Int. J. Rock Mech. Min. Sci. (1972). https://doi.org/10.1016/0148-9062(72)90001-0.10.1016/0148-9062(72)90001-0 ↗
40. Alkali-activated slag mortars10.1016/S0008-8846(99)00154-4 ↗
41. Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements10.1680/adcr.2003.15.3.129 ↗
42. Alkali-activated fly ash/slag cements10.1016/S0008-8846(00)00298-2 ↗
43. The Lightweight Treated Soil Method: New Geomaterials for Soft Ground Engineering in Coastal Areas
44. Stiffness and deformation properties of spent coffee grounds based geopolymers10.1016/j.conbuildmat.2017.01.082 ↗
45. Spent coffee grounds as a non-structural embankment fill material: engineering and environmental considerations10.1016/j.jclepro.2014.03.010 ↗
46. Chemical–mechanical characteristics of crushed oyster-shell10.1016/S0956-053X(02)00159-9 ↗
47. Recycling of seashell waste in concrete: A review10.1016/j.conbuildmat.2017.12.009 ↗
48. A correlation between P-wave velocity, impact strength index, slake durability index and uniaxial compressive strength10.1007/s10064-007-0109-y ↗
49. Y. Ping, R.J. Kirkpatrick, P. Brent, P.F. McMillan, X. Cong, Structure of calcium silicate hydrate (C-S-H): Near-, mid-, and far-infrared spectroscopy, J. Am. Ceram. Soc. 82 (1999). https://doi.org/10.1111/j.1151-2916.1999.tb01826.x.10.1111/j.1151-2916.1999.tb01826.x ↗
50. Effect of alkalis on fresh C–S–H gels. FTIR analysis10.1016/j.cemconres.2009.01.003 ↗
51. Application of Fourier transform infrared spectroscopy in cement Alkali quantification10.1617/s11527-013-0140-3 ↗
52. Utilization of ground waste seashells in cement mortars for masonry and plastering10.1016/j.jenvman.2012.06.032 ↗
53. J.H. Seo, S.M. Park, B.J. Yang, J.G. Jang, Calcined oyster shell powder as an expansive additive in cement mortar, Materials (Basel). (2019). https://doi.org/10.3390/ma12081322.10.3390/ma12081322 ↗