journal article·2021-01

Effect of microwave heating on thermo-mechanical behavior of cemented tailings backfill

Di Wu, Wei Sun, Shuai Liu, Chunlai Qu

Publisher page

Abstract

Abstract Cemented tailings backfill (CTB), which is a mixture of tailings, binder and water, is used to fill underground mined-out areas. Once placed, the CTB is required to provide enough ground support as soon as possible, in order to improve the mining efficiency. A relatively high temperature can accelerate the consolidation of CTB, and microwave radiation can afford a quick temperature rise. Therefore, this study proposed an experimental program incorporating the microwave heating into the conventional curing of the CTB samples. The thermal behavior and strength development of the CTB was investigated, and the CTB deformation under gravity and compression was also evaluated. The obtained results showed that the microwave radiation could significantly increase the CTB temperature. Besides, the microwave heating could either enhance or reduce the mechanical performance of the CTB samples with different curing ages, depending on when the microwave radiation was applied (delay time) and how long it lasted (heating time). This study demonstrates that the microwave technique can definitely be used in mine backfill, for improving the thermo-mechanical performance of the backfill.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tailings Management and Properties · Rock Mechanics and Modeling · Mine drainage and remediation techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Coupled effects of sulphate and temperature on the strength development of cemented tailings backfills: Portland cement-paste backfill10.1016/j.cemconcomp.2010.08.002 ↗
2. Combined influence of sulphate and temperature on the saturated hydraulic conductivity of hardened cemented paste backfill10.1016/j.cemconcomp.2013.03.015 ↗
3. A practice of ultra-fine tailings disposal as filling material in a gold mine10.1016/j.jenvman.2017.02.056 ↗
4. Real-time observation of meso-fracture process in backfill body during mine subsidence using X-ray CT under uniaxial compressive conditions10.1016/j.conbuildmat.2016.03.050 ↗
5. A coupled thermo–hydro-mechanical–chemical model for underground cemented tailings backfill10.1016/j.tust.2015.08.014 ↗
6. A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill10.1016/j.enggeo.2010.05.016 ↗
7. Mix proportioning of underground cemented tailings backfill10.1016/j.tust.2006.08.005 ↗
8. Coupling binder hydration, temperature and compressive strength development of underground cemented paste backfill at early ages10.1016/j.tust.2009.07.008 ↗
9. Initial temperature-dependence of strength development and self-desiccation in cemented paste backfill that contains sodium silicate10.1016/j.cemconcomp.2016.01.005 ↗
10. Sulphate effect on the early age strength and self-desiccation of cemented paste backfill10.1016/j.conbuildmat.2015.12.124 ↗
11. Effectiveness of alkali-activated slag as alternative binder on workability and early age compressive strength of cemented paste backfills10.1016/j.conbuildmat.2019.05.162 ↗
12. Fiber type effect on strength, toughness and microstructure of early age cemented tailings backfill10.1016/j.conbuildmat.2019.06.221 ↗
13. Effect of high temperature on strength and microstructural properties of cemented paste backfill10.1016/j.firesaf.2008.12.004 ↗
14. Yield stress of cemented paste backfill in sub-zero environments: Experimental results10.1016/j.mineng.2016.03.014 ↗
15. Thermal acceleration of Portland cement mortars with microwave energy10.1016/0008-8846(91)90174-G ↗
16. Heat transfer within a concrete slab with a finite microwave heating source10.1016/0017-9310(94)00200-F ↗
17. Characterization of portland cement concrete using electromagnetic waves over the microwave frequencies10.1016/S0008-8846(98)00076-3 ↗
18. Phillipsite synthesis from fly ash prepared by hydrothermal treatment with microwave heating10.1163/156855206777866164 ↗
19. Microwave-Assisted Two-Step Process for the Synthesis of a Single-Phase Na-A Zeolite from Coal Fly Ash10.1163/156855208X291783 ↗
20. Microwave curing at an operating frequency of 2.45GHz of Portland cement paste at early-stage using a multi-mode cavity: Experimental and numerical analysis on heat transfer characteristics10.1016/j.icheatmasstransfer.2010.09.001 ↗
21. Role of microwave radiation in curing the fly ash geopolymer10.1016/j.apt.2012.12.005 ↗
22. Accelerated microwave curing of concrete: A design and performance-related experiments10.1016/j.cemconcomp.2017.08.007 ↗
23. Development of a high strength fly ash-based geopolymer in short time by using microwave curing10.1016/j.ceramint.2018.02.001 ↗
24. Response of alkali activated fly ash mortars to microwave curing10.1016/j.cemconres.2010.08.010 ↗
25. Applications of microwave energy in cement and concrete – A review10.1016/j.rser.2014.05.054 ↗
26. A novel rapid microwave-thermal process for accelerated curing of concrete: Prototype design, optimal process and experimental investigations10.1016/j.conbuildmat.2016.07.084 ↗
27. Microwave curing of Portland cement concrete: experimental results and feasibility for practical applications10.1016/0950-0618(94)00001-I ↗