journal article·2021-02

The synergic effects of metakaolin and polycarboxylate-ether on dispersion of graphene oxide in cementitious environments and macro-level properties of graphene oxide modified cement composites

Kasra Amini, Ali Ghasemi, Siavash Soleimani Amiri, Sajjad Mirvalad, Asghar Habibnejad Korayem

Publisher page

Abstract

Abstract Studying the effects of pozzolanic materials such as silica fume, fly ash, and metakaolin (MK) on dispersion of graphene oxide (GO) in cementitious environments has attracted interest in recent years. In this research, the potential of MK particles as an impediment against GO agglomeration in high alkaline environments is investigated. Despite the exhibited results in previous studies that the particles of pozzolans can inhibit the agglomeration of GO in cementitious environments by consuming Ca(OH)2 besides the mechanical separation of GO sheets, the results of the present study revealed that MK particles alone could not prevent GO nanosheets from clustering, physically or chemically. However, based on UV–vis spectroscopy and SEM-EDS analysis results, the incorporation of MK particles with Polycarboxylate-ether (PCE) significantly ameliorates the dispersion and time-dependent stability of GO nanosheets in simulated cement pore solution. Indeed, in this case, the anchoring characteristic of the negative surface charge of MK particles besides the steric hindrance effect of PCE’s side chains can reduce the possibility of the interaction between GO nanosheets and calcium ions in cementitious environments. Moreover, the improved stability of MK-PCE modified GO suspensions ensures the permanence of the desired dispersion of GO in the alkaline medium of cement composites, which is advantageous for enhancing the mechanical and transport properties of cement composites. In this research, the results of compressive strength, flexural strength, flexural modulus, toughness, and ultrasonic pulse velocity tests on MK-GO incorporated cement paste samples after 28 days of curing showed an enhancement by 27.6%, 36.3%, 49.8%, 42.0%, and 5.0%, respectively compared to the reference sample. This improvement is primarily due to the beneficial effects of MK-PCE to make GO play a better reinforcing role in cement composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Use of 2D Graphene Nanoplatelets (GNP) in cement composites for structural health evaluation10.1016/j.compositesb.2014.08.005 ↗
2. Nanoparticles as concrete additives: Review and perspectives10.1016/j.conbuildmat.2018.04.214 ↗
3. Nanotechnology in concrete – A review10.1016/j.conbuildmat.2010.03.014 ↗
4. Nano reinforced cement and concrete composites and new perspective from graphene oxide10.1016/j.conbuildmat.2014.09.040 ↗
5. Review of functionalization, structure and properties of graphene/polymer composite fibers10.1016/j.compositesa.2016.04.011 ↗
6. In-situ preparation of fully stabilized graphene/cubic-leucite composite through graphene oxide/geopolymer10.1016/j.matdes.2016.03.139 ↗
7. Mechanical Properties of Monolayer Graphene Oxide10.1021/nn101781v ↗
8. Enhanced acidity and pH-dependent surface charge characterization of successively oxidized graphite oxides10.1016/j.carbon.2005.08.005 ↗
9. Investigation on dispersion of graphene oxide in cement composite using different surfactant treatments10.1016/j.conbuildmat.2017.11.154 ↗
10. Structure of Graphite Oxide Revisited10.1021/jp9731821 ↗
11. Incorporation of graphene oxide and silica fume into cement paste: A study of dispersion and compressive strength10.1016/j.conbuildmat.2016.07.022 ↗
12. Barriers to achieving highly dispersed graphene oxide in cementitious composites: An experimental and computational study10.1016/j.conbuildmat.2018.12.030 ↗
13. Molecular Dynamics Study on the Structure and Dynamics of NaCl Solution Transport in the Nanometer Channel of CASH Gel10.1021/acssuschemeng.8b02126 ↗
14. Reactive force field simulation on polymerization and hydrolytic reactions in calcium aluminate silicate hydrate (C–A–S–H) gel: structure, dynamics and mechanical properties10.1039/C4RA10645H ↗
15. Early-age interaction mechanism between the graphene oxide and cement hydrates10.1016/j.conbuildmat.2017.06.176 ↗
16. Deep research about the mechanisms of graphene oxide (GO) aggregation in alkaline cement pore solution10.1016/j.conbuildmat.2020.118446 ↗
17. Preparation and mechanical properties of graphene oxide: cement nanocomposites10.1155/2014/276323 ↗
18. Aggregation size effect of graphene oxide on its reinforcing efficiency to cement-based materials10.1016/j.cemconcomp.2019.04.005 ↗
19. Chemical functionalization of graphene oxide for improving mechanical and thermal properties of polyurethane composites10.1016/j.matdes.2015.07.101 ↗
20. The effect of the ultrasonication pre-treatment of graphene oxide (GO) on the mechanical properties of GO/polyvinyl alcohol composites10.1016/j.carbon.2012.12.071 ↗
21. Study on dispersion, adsorption and flow retaining behaviors of cement mortars with TPEG-type polyether kind polycarboxylate superplasticizers10.1016/j.conbuildmat.2014.04.050 ↗
22. A short discussion on how to effectively use graphene oxide to reinforce cementitious composites10.1016/j.conbuildmat.2018.08.170 ↗
23. Steric stabilization of graphene oxide in alkaline cementitious solutions: Mechanical enhancement of cement composite10.1016/j.matdes.2017.04.083 ↗
24. Investigation of the effectiveness of PC@GO on the reinforcement for cement composites10.1016/j.conbuildmat.2016.03.090 ↗
25. Investigation of dispersion behavior of GO modified by different water reducing agents in cement pore solution10.1016/j.carbon.2017.11.016 ↗
26. Mechanical behavior and toughening mechanism of polycarboxylate superplasticizer modified graphene oxide reinforced cement composites10.1016/j.compositesb.2017.01.056 ↗
27. N. Chanu, Contribution Of Rice Husk Ash To The Properties Of Cement Mortar And Concrete, Int. J. Eng. Res. Tech. 2013.
28. Mechanical properties and durability of mortar and concrete containing natural pozzolana and limestone blended cements10.1016/j.cemconcomp.2007.04.009 ↗
29. Effects of Different Mineral Admixtures on the Properties of Fresh Concrete
30. Metakaolin and calcined clays as pozzolans for concrete: a review10.1016/S0958-9465(00)00092-5 ↗
31. Metakaolin as cementitious material: History, scours, production and composition – A comprehensive overview10.1016/j.conbuildmat.2012.12.001 ↗
32. Influence of metakaolin on the properties of mortar and concrete: A review10.1016/j.clay.2008.11.007 ↗
33. Comparative evaluation on the dispersion and stability of graphene oxide in water and cement pore solution by incorporating silica fume10.1016/j.cemconcomp.2018.08.011 ↗
34. ASTM C150 / C150M-16, Standard Specification for Portland Cement, ASTM International, West Conshohocken, PA, 2016.
35. ASTM C778-13, Standard Specification for Standard Sand, ASTM International, West Conshohocken, PA, 2013.
36. An investigation into the colloidal stability of graphene oxide nano-layers in alite paste10.1016/j.cemconres.2017.05.011 ↗
37. Enhanced dynamic mechanical properties of cement paste modified with graphene oxide nanosheets and its reinforcing mechanism10.1016/j.cemconcomp.2018.07.001 ↗
38. ASTM C494 / C494M-16, Standard Specification for Chemical Admixtures for Concrete, ASTM International, West Conshohocken, PA, 2016.
39. The effect of concrete pore solution composition on the quality of passive oxide films on black steel reinforcement10.1016/j.cemconcomp.2008.10.003 ↗
40. ASTM C305-14, Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, ASTM International, West Conshohocken, PA, 2014.
41. ASTM C109 / C109M–16a, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM International, West Conshohocken, PA, 2016.
42. ASTM C78 / C78M-16, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading), ASTM International, West Conshohocken, PA, 2016.
43. ASTM C348-14, Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars, ASTM International, West Conshohocken, PA, 2014.
44. ASTM C349-14, Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure), ASTM International, West Conshohocken, PA, 2014.
45. ASTM C597-16, Standard Test Method for Pulse Velocity Through Concrete, ASTM International, West Conshohocken, PA, 2016.
46. Surface Chemistry of Ground Granulated Blast Furnace Slag in Cement Pore Solution and Its Impact on the Effectiveness of Polycarboxylate Superplasticizers10.1111/j.1551-2916.2011.04968.x ↗
47. Graphene Oxide Papers Modified by Divalent Ions—Enhancing Mechanical Properties via Chemical Cross-Linking10.1021/nn700349a ↗
48. Insights into key factors controlling GO stability in natural surface waters10.1016/j.jhazmat.2017.04.027 ↗
49. Impact of Al2O3 on the aggregation and deposition of graphene oxide10.1021/es404996b ↗
50. Aggregation kinetics of graphene oxides in aqueous solutions: experiments, mechanisms, and modeling10.1021/la404134x ↗
51. Synergistic effects of silica nanoparticles/polycarboxylate superplasticizer modified graphene oxide on mechanical behavior and hydration process of cement composites10.1039/C7RA01716B ↗
52. Adsorption of Polyelectrolytes on Calcium Carbonate - Which Thermodynamic Parameters are Driving This Process?10.1111/j.1551-2916.2011.04682.x ↗
53. Experimental determination of the effective anionic charge density of polycarboxylate superplasticizers in cement pore solution10.1016/j.cemconres.2008.09.001 ↗
54. Impact of Molecular Structure on Zeta Potential and Adsorbed Conformation of α-Allyl-ω-Methoxypolyethylene Glycol - Maleic Anhydride Superplasticizers10.3151/jact.4.233 ↗
55. Impact of Natural Organic Matter on the Physicochemical Properties of Aqueous C60 Nanoparticles10.1021/es702231g ↗
56. Fractal analysis of pore structures in graphene oxide-carbon nanotube based cementitious pastes under different ultrasonication10.1515/ntrev-2019-0010 ↗
57. Influence of ultrasonication on the dispersion and enhancing effect of graphene oxide–carbon nanotube hybrid nanoreinforcement in cementitious composite10.1016/j.compositesb.2018.11.066 ↗
58. Kinetics of Nanotube and Microfiber Scission under Sonication10.1021/jp906296y ↗
59. Size-specified graphene oxide sheets: ultrasonication assisted preparation and characterization10.1007/s10853-013-7866-8 ↗
60. Time-Dependent Study of the Exfoliation Process of Carbon Nanotubes in Aqueous Dispersions by Using UV−Visible Spectroscopy10.1021/ac050358j ↗
61. The role of surfactant adsorption during ultrasonication in the dispersion of single-walled carbon nanotubes10.1166/jnn.2003.194 ↗
62. Reinforcing Effects of Graphene Oxide on Portland Cement Paste10.1061/(ASCE)MT.1943-5533.0001125 ↗
63. Mechanical properties and microstructure of a graphene oxide–cement composite10.1016/j.cemconcomp.2015.02.001 ↗
64. The role of admixed graphene oxide in a cement hydration system10.1016/j.carbon.2019.03.072 ↗
65. An intensive review on the role of graphene oxide in cement-based materials10.1016/j.conbuildmat.2019.117939 ↗
66. Relative strength, pozzolanic activity and cement hydration in superplasticised metakaolin concrete10.1016/0008-8846(96)00148-2 ↗
67. Study on the Effect of Graphene Oxide with Low Oxygen Content on Portland Cement Based Composites10.3390/ma12050802 ↗
68. Preparation and characterization of graphene oxide paper10.1038/nature06016 ↗
69. Comparison of fly ash, silica fume and metakaolin from mechanical properties and durability performance of mortar mixtures view point10.1016/j.conbuildmat.2014.07.089 ↗