journal article·2021-03

Determination of specific surface area of irregular aggregate by random sectioning and its comparison with conventional methods

Qiang Ren, Luchuan Ding, Xiaodi Dai, Zhengwu Jiang, Guang Ye, Geert De Schutter

Publisher page

Abstract

Abstract A two-dimensional (2D) image-based methodology was proposed to measure the specific surface area (SSA, specified as the surface area per unit volume) of irregular aggregate by random sectioning. Conventional methods including spherical assumption, Brunauer-Emmett-Teller (BET) and computed tomography (CT) tests were used and compared in this study. Results show that spherical assumption provides the lowest SSA among these methods since the feature of anisotropy in dimension is not considered. SSA by BET test has one order of magnitude higher value than others, which is attributed to the fact that BET method measures each position of particles that nitrogen molecule can be adsorbed on during the applied relative pressure, based on the ‘pixel’ of nitrogen molecule. The proposed random sectioning method presents very similar SSA result compared to CT method, indicating that it can be considered as a reliable method. To improve the estimation of SSA by random sectioning method, factors that may influence SSA result were analyzed. Results indicate that the number of samples should be high enough to reach a constant result and the thresholding algorithm should be adequate. Besides, a higher resolution of pixel provides a higher SSA value. The comparison among these methods demonstrate that it is necessary to determine the scale at which the features of the surface are supposed to be captured before selecting the optimal testing method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Soil and Unsaturated Flow · Mineral Processing and Grinding

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. M. van de Ven, Influence treatment in laboratory of stone surface on the surface roughness
2. L. Wang, J. Frost David, Quantification of the specific aggregate surface area using X-ray tomography, in: E. Tutumluer;, Y.M. Najjar;, E. Masad (Eds.) 15th Engineering Mechanics Division Conference, ASCE, New York, United States, 2002, pp. 3-17. http://doi.org/10.1061/40709(257)1.10.1061/40709(257)1 ↗
3. Combined effects of water film, paste film and mortar film thicknesses on fresh properties of concrete10.1016/j.conbuildmat.2013.10.014 ↗
4. Utilization of low-quality desulfurized ash from semi-dry flue gas desulfurization by mixing with hemihydrate gypsum10.1016/j.fuel.2019.115783 ↗
5. Role of limestone powder in early-age cement paste considering fineness effects10.1061/(ASCE)MT.1943-5533.0003380 ↗
6. Influence of aggregate surface area on mechanical properties of mortar
7. Performance and ITZ of pervious concrete modified by vinyl acetate and ethylene copolymer dispersible powder10.1016/j.conbuildmat.2019.117532 ↗
8. Microstructural characterization of ITZ in blended cement concretes and its relation to transport properties10.1016/j.cemconres.2015.09.018 ↗
9. Alexander · 2010
10. Exploring the relation between the flow of mortar and specific surface area of its constituents10.1016/j.conbuildmat.2019.03.260 ↗
11. Estimation of specific surface area of particles based on size distribution curve10.1680/jmacr.17.00045 ↗
12. Simple estimation of the surface area of irregular 3D particles10.1061/(ASCE)MT.1943-5533.0001575 ↗
13. Multi-level diffusion model for manufactured sand mortar considering particle shape and limestone powder effects10.1016/j.conbuildmat.2019.02.139 ↗
14. An empirical method for estimating surface area of aggregates in hot mix asphalt
15. Anochie-Boateng · 2011
16. Taylor · 1997
17. A comparison of the specific surface area of fly ash measured by image analysis with conventional methods10.1016/j.conbuildmat.2018.09.131 ↗
18. A method for determining the surface area of quarried rocks10.1520/GTJ10189J ↗
19. The study of pervious concrete mix proportion by the method of specific surface area of aggregate10.1088/1757-899X/231/1/012094 ↗
20. Influence of aggregate surface treatment on corrosion resistance of cement composite under chloride attack10.1016/j.conbuildmat.2020.118636 ↗
21. The BET-specific surface area of hydrated Portland cement and related materials10.1016/S0008-8846(03)00225-4 ↗
22. 15901, Determination of the specific surface area of solids by gas adsorption — BET method
23. Filler from crushed aggregate for concrete: Pore structure, specific surface, particle shape and size distribution10.1016/j.cemconcomp.2014.03.010 ↗
24. E.C. Arvaniti, M.C.G. Juenger, S.A. Bernal, J. Duchesne, L. Courard, S. Leroy, J.L. Provis, A. Klemm, N. De Belie, Determination of particle size, surface area, and shape of supplementary cementitious materials by different techniques, 48(11) (2015) 3687-3701. http://doi.org/10.1617/s11527-014-0431-3.10.1617/s11527-014-0431-3 ↗
25. A new quantification method based on SEM-EDS to assess fly ash composition and study the reaction of its individual components in hydrating cement paste10.1016/j.cemconres.2015.02.008 ↗
26. Acquisition, optimization and interpretation of X-ray computed tomographic imagery: applications to the geosciences10.1016/S0098-3004(00)00116-3 ↗
27. Some properties of irregular 3-D particles10.1016/j.powtec.2005.10.013 ↗
28. Measurement of particle size distribution and specific surface area for crushed concrete aggregate fines10.1016/j.apt.2016.11.018 ↗
29. Applications of high-resolution X-ray computed tomography in petrology, meteoritics and palaeontology, Applications of X-ray Computed Tomography in the Geosciences10.1144/GSL.SP.2003.215.01.02 ↗
30. Mouton · 2011
31. Adsorption of gases in multimolecular layers10.1021/ja01269a023 ↗
32. Modifying the BET model for accurately determining specific surface area and surface energy components of aggregates10.1016/j.conbuildmat.2018.04.215 ↗
33. Functionalization of renewable bamboo charcoal to improve indoor environment quality in a sustainable way10.1016/j.jclepro.2019.119028 ↗
34. Cement-based composite with humidity adsorption and formaldehyde removal functions as an indoor wall material10.1016/j.conbuildmat.2020.118610 ↗
35. Application of X-ray computed tomography to characterise the early hydration of calcium aluminate cement10.1016/S0958-9465(01)00063-4 ↗
36. X-ray microtomography10.1016/j.matchar.2010.09.012 ↗
37. HECTOR: A 240kV micro-CT setup optimized for research10.1088/1742-6596/463/1/012012 ↗
38. Software tools for quantification of X-ray microtomography10.1016/j.nima.2007.05.073 ↗
39. Measurement of internal boundaries in three-dimensional structures by random sectioning
40. A comparison of seven thresholding techniques with the k-means clustering algorithm for measurement of bread-crumb features by digital image analysis10.1016/j.jfoodeng.2005.03.007 ↗
41. Image analysis and mathematical morphology for civil engineering materials10.1016/S0958-9465(00)00058-5 ↗
42. On threshold selection using clustering criteria10.1109/TSMC.1985.6313443 ↗
43. Reliable specific surface area measurements on anhydrous cements10.1016/j.cemconres.2014.10.009 ↗
44. Pore segmentation of cement-based materials from backscattered electron images10.1016/j.cemconres.2005.10.006 ↗
45. A threshold selection method from gray-level histograms10.1109/TSMC.1979.4310076 ↗
46. Image thresholding by minimizing the measures of fuzziness10.1016/0031-3203(94)E0043-K ↗
47. A new method for gray-level picture thresholding using the entropy of the histogram10.1016/0734-189X(85)90125-2 ↗