journal article·2021-03

Multi-scale characterization on behaviors of the interface between magnesium phosphate cement and portland cement

Fei Liu, Baofeng Pan, Peng Cao, Changjun Zhou

Publisher page

Abstract

Abstract This study focused on the interfacial transition zone (ITZ) between magnesium phosphate cement (MPC) paste and Portland cement paste (PCP). Multi-scale analyses were conducted to explore bonding characteristics and interfacial shear strengths of the ITZ with an innovative composite specimen. Meanwhile, ITZ was investigated by the Nano-indentation test, the scanning electron microscope (SEM), and the energy-dispersive spectrometer (EDS). Based on the damage mechanics and the interface kinematics formula, the viscous behavior and friction behavior were coupled together for the first time to develop the constitutive relation of the interface damage. A finite element (FE) model of MPC-PCP interface shear strength was developed and conducted to validate the proposed constitutive relation of the interface damage. Sensitivity analysis of repair size was predicted by the effect of different sizes on shear strength. The 7d shear strength of the repair interface reached 5.2 MPa, which indicates that MPC has good bonding with PCP. Investigated by SEM/EDS analysis, the cracks appeared at 10 μm away from PCP edge and the width at 6 h and 3d was around 3–5 μm. According to the nano-indentation test, the elastic modulus varied greatly in the ITZ and the lowest value located 10 μm away from the PCP side. Numerical results from FE models were found consistent with the experimental results, which validates the proposed constitutive relation of the interface damage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Oxide Properties and Applications · Electromagnetic wave absorption materials · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Laboratory evaluation of magnesium phosphate cement paste and mortar for rapid repair of cement concrete pavement10.1016/j.conbuildmat.2014.02.015 ↗
2. J.W. Park, K.H. Kim, K.Y. Ann, Fundamental Properties of Magnesium Phosphate Cement Mortar for Rapid Repair of Concrete, 2016 (2016).10.1155/2016/7179403 ↗
3. Y. Fu, X. Cao, Z. Li, Printability of Magnesium Potassium Phosphate Cement with Different Mixing Proportion for Repairing Concrete Structures in Severe Environment, 711 (2016) 989–995. doi: 10.4028/www.scientific.net/KEM.711.989.10.4028/www.scientific.net/KEM.711.989 ↗
4. Multiple scaling investigation of magnesium phosphate cement modified by emulsified asphalt for rapid repair of asphalt mixture pavement10.1016/j.conbuildmat.2014.07.079 ↗
5. Q. Yang, B. Zhu, X. Wu, Characteristics and durability test of magnesium phosphate cement-based material for rapid repair of concrete, 33 (2000) 229–234.10.1007/BF02479332 ↗
6. ScienceDirect Novel material i. e. magnesium phosphate cement (MPC) as repairing material in roads and buildings10.1016/j.matpr.2019.06.402 ↗
7. Property evaluation of magnesium phosphate cement mortar as patch repair material10.1016/j.conbuildmat.2009.10.039 ↗
8. M. Alexander, Engineering and Transport Properties of the Interfacial Transition Zone in Cementitious Composites, Rilem Publ. (1999). doi: 10.1016/j.cemconres.2017.02.033.10.1016/j.cemconres.2017.02.033 ↗
9. K.L. Scrivener, D.B. Technik, The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate, 12 (2004) 411–421.10.1023/B:INTS.0000042339.92990.4c ↗
10. Interfacial transition zone in concrete10.1016/1065-7355(95)90037-3 ↗
11. Interfacial phenomena in steel fibre reinforced cement I: Structure and strength of interfacial region10.1016/0008-8846(78)90054-6 ↗
12. Analysis of phases in cement paste using backscattered electron images, methanol adsorption and thermogravimetric analysis
13. K.L. Scrivener, Backscattered electron imaging of cementitious microstructures : understanding and quantification, 26 (2004) 935–945. doi: 10.1016/j.cemconcomp.2004.02.029.10.1016/j.cemconcomp.2004.02.029 ↗
14. B.L. K. Scrivener, R. Snellings, A Practical Guide to Microstructural Analysis of Cementitious Materials, Crc Press. (2016). doi: 10.1016/j.conbuildmat.2004.03.005.10.1016/j.conbuildmat.2004.03.005 ↗
15. Crystallization structure in the contact zone between aggregate and cement in concrete
16. Cement and concrete research the nano-mechanical signature of ultra high performance concrete by statistical nanoindentation techniques10.1016/j.cemconres.2008.09.002 ↗
17. Identification of interfacial transition zone in asphalt concrete based on nano-scale metrology techniques10.1016/j.matdes.2017.05.015 ↗
18. Thermal expansion prediction of cement concrete based on a 3D micromechanical model considering interfacial transition zone10.1016/j.conbuildmat.2018.03.132 ↗
19. Characterization of the interfacial transition zone of CNF-Reinforced cementitious composites10.1016/j.cemconcomp.2019.03.002 ↗
20. Cement and Concrete Research Application of nanoindentation testing to study of the interfacial transition zone in steel fi ber reinforced mortar10.1016/j.cemconres.2009.05.002 ↗
21. M. Roig-Flores, F. Šimičević, Ana Maričić, P. Serna, Horvat, INTERFACIAL TRANSITION ZONE IN MATURE FIBER, 115 (2018) 623–631.10.14359/51702419 ↗
22. J.C. Nadeau, A multiscale model for effective moduli of concrete incorporating ITZ water – cement ratio gradients , aggregate size distributions , and entrapped voids, 33 (2003) 103–113.10.1016/S0008-8846(02)00931-6 ↗
23. M. Königsberger, applied sciences Micromechanical Multiscale Modeling of ITZ-Driven Failure of Recycled Concrete : Effects of Composition and Maturity on the Material Strength, (2018). doi: 10.3390/app8060976.10.3390/app8060976 ↗
24. Improving the microstructure of ITZ and reducing the permeability of concrete with various water / cement ratios using nano-silica10.1007/s10853-018-2872-5 ↗
25. Effect of interfacial transition zone on the Young’s modulus of carbon nanofiber reinforced cement concrete10.1016/j.cemconres.2018.02.014 ↗
26. Effect of the interfacial zone on the tensile-damage behavior of an asphalt mixture containing MSWI bottom ash aggregates10.1061/(ASCE)MT.1943-5533.0001792 ↗
27. H.A. Shirazi, S.A. Mirmohammadi, M. Shaali, A. Asna, M.R. Ayatollahi, A constitutive material model for a commercial PMMA bone cement using a combination of nano-indentation test and fi nite element analysis, 59 (2017) 328–335. doi: 10.1016/j.polymertesting.2017.01.031.10.1016/j.polymertesting.2017.01.031 ↗
28. To study the effects of nano-additives and nano-indentation variables on viscoplastic behaviour of a polymeric orthopaedic bone cement To study the effects of nano-additives and nano-indentation variables on viscoplastic behaviour of a polymeric orthopaedic bone cement, (2019).
29. Cement and Concrete Research On the use of peak-force tapping atomic force microscopy for quanti fi cation of the local elastic modulus in hardened cement paste10.1016/j.cemconres.2011.08.009 ↗
30. AFM PeakForce QNM mode : Evidencing nanometre-scale mechanical properties of chitin-silica hybrid nanocomposites10.1016/j.carbpol.2016.05.042 ↗
31. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
32. Investigation of the relationship between elastic modulus and hardness based on depth-sensing indentation measurements10.1016/j.actamat.2004.08.002 ↗
33. The mechanical response of cellular materials with spinodal topologies10.1016/j.jmps.2019.01.002 ↗
34. Numerical simulation of static mechanical properties of PMMA microcellular foams10.1016/j.compscitech.2020.108110 ↗
35. G. Del, M. Raous, A unified model for adhesive interfaces with damage , viscosity , and friction, Eur. J. Mech. / A Solids. 29 (2010) 496–507. doi: 10.1016/j.euromechsol.2010.02.004.10.1016/j.euromechsol.2010.02.004 ↗
36. Non associative damage interface model for mixed mode delamination and frictional contact10.1016/j.euromechsol.2019.03.012 ↗
37. A thermodynamically consistent cohesive-frictional interface model for mixed mode delamination10.1016/j.engfracmech.2015.12.001 ↗
38. Cohesive – frictional interface constitutive model10.1016/j.ijsolstr.2009.02.016 ↗
39. Analytical model for the pullout behavior of straight and hooked-end steel fibers10.1061/(ASCE)EM.1943-7889.0000800 ↗
40. Numerical and analytical modeling of fiber-matrix bond behaviors of high performance cement composite10.1016/j.cemconres.2019.105892 ↗
41. Quantitative characterization of anisotropic properties of the interfacial transition zone (ITZ) between micro fi ber and cement paste10.1016/j.cemconres.2019.05.007 ↗
42. Microstructure of magnesium potassium phosphate cement10.1016/j.conbuildmat.2010.12.035 ↗
43. M.A.M. Investigation, The Elastic Properties of Calcium Leached Cement Pastes and, Investig. CEE Rep. R02-01. (2002).
44. Cement and Concrete Research Effective properties of a fl y ash geopolymer : Synergistic application of X-ray synchrotron tomography, nanoindentation, and homogenization models10.1016/j.cemconres.2015.08.004 ↗
45. P. Acker, Micromechanical analysis of creep and shrinkage mechanisms, Creep, Shrinkage Durab. Mech. Concr. Other Quasi-Brittle Mater. Proc. Sixth Int. Conf. 1 (2001) 15–25. doi: 10.1016/j.jclepro.2018.09.027.10.1016/j.jclepro.2018.09.027 ↗
46. K. Velez, S. Maximilien, D. Damidot, G. Fantozzi, F. Sorrentino, Determination by nanoindentation of elastic modulus and hardness of pure constituents of Portland cement clinker, 31 (2001) 555–561.10.1016/S0008-8846(00)00505-6 ↗
47. Experimental-computational approach to investigate compressive strength of magnesium phosphate cement with nanoindentation and finite element analysis Components Analysis of MPC Modified Constitutive Relations FE Model of MPC10.1016/j.conbuildmat.2018.09.145 ↗