The combined effect of CO2 and calcined hydrotalcite on one-coat limestone mortar properties
Source abstract
Abstract
Abstract This paper studies the combined effect of different percentages of calcined hydrotalcite of Mg3Al-CO3 and different concentrations of CO2 in the curing atmosphere on the fresh and hardened properties of a commercial one-coat mortar. The workable life, fresh and dry bulk density decreased with the incorporation of calcined hydrotalcite, which (also) helped to maintain the mechanical properties of mortar over time. CO2 increased the dry bulk density, decreased the accessible porosity for water, and improved the mechanical properties of all one-coat mortar samples. Calcined hydrotalcite reduced the carbonation phenomenon which could mitigate the appearance of pathologies in the coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Magnesium Oxide Properties and Applications · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Functionalized Rutile TiO 2 (110) as a Sorbent to Capture CO 2 through Noncovalent Interactions: A Computational Investigation10.1021/acs.jpcc.8b09311 ↗
2. Global Warming and Carbon-Negative Technology: Prospects for a Lower-Cost Route to a Lower-Risk Atmosphere
3. United states Enviromental Protection Agency, Overview of Greenhouse Gases, (2019). https://www.epa.gov/ghgemissions/overview-greenhouse-gases (accessed July 9, 2019).
4. Carbon capture and storage (CCS): The way forward10.1039/C7EE02342A ↗
5. Carbon capture, storage and utilisation technologies: A critical analysis and comparison of their life cycle environmental impacts10.1016/j.jcou.2014.12.001 ↗
6. Emerging energy-efficiency and CO 2 emission-reduction technologies for cement and concrete production: A technical review10.1016/j.rser.2012.07.019 ↗
7. The CO2 uptake of concrete in a 100 year perspective10.1016/j.cemconres.2007.06.009 ↗
8. CO2 capture capacity of CaO in long series of carbonation/calcination cycles10.1021/ie0606946 ↗
9. L. Quesada, M. del R. Perez, D. Fernández, A. Amores, J. maria Fernández, Optimum Particle Size of Treated Calcites for CO2 Capture in a Power Plant, (2019) 1–17.
10. Use of a CO2 curing step to improve the properties of concrete prepared with recycled aggregates10.1016/j.cemconcomp.2013.09.008 ↗
11. Effect of further water curing on compressive strength and microstructure of CO2-cured concrete10.1016/j.cemconcomp.2016.05.026 ↗
12. Pilot testing of enhanced sorbents for calcium looping with cement production10.1016/j.apenergy.2018.05.039 ↗
13. Carbonate looping experiments in a 1 MWth pilot plant and model validation10.1016/j.fuel.2013.12.043 ↗
14. Experimental assessment of commercial one-coat renders for buildings faades10.1016/j.conbuildmat.2010.06.044 ↗
15. Evaluation of capillary water absorption in rendering mortars made with powdered waterproofing additives10.1016/j.conbuildmat.2009.05.002 ↗
16. G. Aragón Torre, Determinación del módulo de deformación dinámico de un mortero de revestimiento a partir de muestras obtenidas en laboratorio e in situ, 2015. http://tesisenred.net/handle/10259/4624
17. Alexander · 2009
18. C. Capener, Properties of modern rendering systems based on mineral binders, (2007).10.1201/9781439828403.ch120 ↗
19. Interlayer accessibility in layered double-metal hydroxides
20. Potential use of modified hydrotalcites as adsorbent of Bentazon and Metazachlor10.1016/j.clay.2017.03.007 ↗
21. K. Takehira, T. Shishido, D. Shoro, K. Murakami, Preparation of egg-shell type Ni-loaded catalyst by adopting ‘“ Memory Effect ”’ of Mg – Al hydrotalcite and its application for CH 4 reforming, 5 (2004) 209–213. 10.1016/j.catcom.2004.02.004.10.1016/j.catcom.2004.02.004 ↗
22. Z. Gao, K. Sasaki, X. Qiu, Interfaces : Adsorption , Reactions , Films , Forces , Measurement Techniques , Charge Structural memory effect of Mg-Al and Zn-Al layered double hydroxides in the presence of different natural humic acids : Process and mechanism Structural memory effect , (2018). 10.1021/acs.langmuir.8b00059.10.1021/acs.langmuir.8b00059 ↗
23. Z.Y. Qu, Q.L. Yu, H.J.H. Brouwers, Cement and Concrete Research Relationship between the particle size and dosage of LDHs and concrete resistance against chloride ingress, 105 (2018) 81–90. 10.1016/j.cemconres.2018.01.005.10.1016/j.cemconres.2018.01.005 ↗
24. Z. Yang, H. Fischer, J. Cerezo, J.M.C. Mol, R. Polder, Aminobenzoate modified Mg A Al hydrotalcites as a novel smart additive of reinforced concrete for anticorrosion applications, 47 (2013) 1436–1443.10.1016/j.conbuildmat.2013.06.049 ↗
25. Cement & Concrete Composites Synthesis and characterization of modified hydrotalcites and their ion exchange characteristics in chloride-rich simulated concrete pore solution10.1016/j.cemconcomp.2013.03.008 ↗
26. Role of layered double hydroxides in setting, hydration degree, microstructure and compressive strength of cement paste10.1016/j.clay.2018.03.024 ↗
27. Chloride binding of synthetic Ca-Al-NO3 LDHs in hardened cement paste10.1016/j.conbuildmat.2015.05.047 ↗
28. Influence of layered double hydroxides on microstructure and carbonation resistance of sulphoaluminate cement concrete10.1016/j.conbuildmat.2013.07.049 ↗
29. Stains in facades’ rendering - Diagnosis and maintenance techniques’ classification10.1016/j.conbuildmat.2006.08.023 ↗
30. UNE-EN-998-1:2018, Specification for mortar for mansory. Part 1: Rendering and plastering mortar, (2018).
31. UNE-EN-80305:2012, White cements, (2012).
32. Sigma-Aldrich. Hydrotalcite, synthetic, Prod. Specif. 21 (1993) 21–22. 10.1080/09613219308727250
33. Mitigation of CO2 emissions by hydrotalcites of Mg3Al-CO3 at 0°C and high pressure, Submitt. to
34. Determination of strenght · 2018
35. EN-1015-2, Bulk sampling of mortars and preparation of test mortars, (1999).
36. EN-1015-3, Methods of test mortart masonry: Part 3: Determination of consistence of fresh mortar (by flow table), 2000.
37. Influence of the kneading water content in the behaviour of single-coat mortars10.1016/j.cemconres.2005.04.011 ↗
38. Evaluation of mixing and application process parameters of single-coat mortars10.1016/j.cemconres.2004.10.026 ↗
39. EN-1015-11, Methods of test for mortar for mansory. Part 11: Determination of flexural and compressive strenght of hardened mortar, (2000).
40. EN-1015-9, Methods of test for mortar for mansory. Part 9: Determination of workable life and correction time of fresh mortar, (2000).
41. Spain · 1993
42. Strength and workability of masonry mortars manufactured with ladle furnace slag10.1016/j.resconrec.2009.04.015 ↗
43. Effect of nano-silica on rheology and fresh properties of cement pastes and mortars10.1016/j.conbuildmat.2009.02.005 ↗
44. EN-1015-6, Methods of test mortar for mansory. Part 6: Determination of bulk density of fresh mortar, (1999).
45. EN-1015-10, Methods of test mortar for mansory. Part 6: Determination of bulk density of hardened mortar, (2000).
46. UNE-83980, Concrete durability. Test methods. Determination of the water absorption, density and accesible porosity for water in concrete, (2014).
47. UNE-EN-1936, Natural stone test methods. Determination of real density and apparent density, and of total and open porosity, (2007).
48. Assessment of glass fibre reinforced polymer waste reuse as filler in mortars10.1016/j.jclepro.2018.11.080 ↗
49. Rilem TC 203-RHM: Repair mortars for historic masonry. Testing of hardened mortars, a process of questioning and interpreting10.1617/s11527-008-9455-x ↗
50. JCPDS, Joint Committee on Power Diffraction Standard-International Centre for Diffraction, 2003
51. High temperature adsorption of CO 2 on Mg – Al hydrotalcite : Effect of the charge compensating anions and the synthesis pH10.1016/j.cattod.2010.10.042 ↗
52. Studies on cement and mortar containing low-calcium fly ash, limestone, and dolomitic limestone10.1016/j.cemconcomp.2007.07.002 ↗
53. S.R.A. Dantas, R. Serafini, R.C. de Oliveira Romano, F. Vittorino, K. Loh, Influence of the nano TiO2 dispersion procedure on fresh and hardened rendering mortar properties, Constr. Build. Mater. 215 (2019) 544–556. 10.1016/j.conbuildmat.2019.04.19010.1016/j.conbuildmat.2019.04.190 ↗
54. D. Suescum, D. Cantador, J. Jiménez, J. Fernández, CO2 capture with hydrotalcites of MgAl-CO3 and organohydrotalcites for application as sink urban greenhouse gas, Int. Conf. Green Construcction Cordoba (Spain). Ww.Uco.Es/Icgc2019/Program.Htm#program. (2019).
55. Physical and mechanical characterization of a commercial rendering mortar using destructive and non-destructive techniques10.1016/j.conbuildmat.2019.07.034 ↗
56. Experimental study on CO2 curing for enhancement of recycled aggregate properties10.1016/j.conbuildmat.2013.09.008 ↗
57. DEF: Una forma de ataque por sulfatos DEF: As a form of sulfate attack10.3989/mc.1996.v46.i244.519 ↗
58. J.M. Fernández, Introducción a los Cementos, Servicio de Publicaciones de la Universidad de Córdoba.ISBN 84-7801-731-3, 2004.
59. Evaluation of the physical-mechanical properties of cement-lime based masonry mortars produced with mixed recycled aggregates10.3989/mc.2020.02819 ↗
60. Dependency of C-S-H carbonation rate on CO2 pressure to explain transition from accelerated tests to natural carbonation10.1016/j.cemconres.2010.06.010 ↗
61. Effect of curing conditions on the properties of lime, lime-metakaolin and lime-zeolite mortars10.1016/j.conbuildmat.2015.10.128 ↗
62. Water demand of amorphous nano silica and its impact on the workability of cement paste10.1016/j.cemconres.2011.10.008 ↗
63. Physical and chemical assessment of lime-metakaolin mortars: Influence of binder:aggregate ratio10.1016/j.cemconcomp.2013.06.010 ↗
64. D. Cardoso, A. Gameiro, A. Santos-Silva, P. Faria, R. Vieira, R. Veiga, A. Velosa, Influence of curing conditions in lime-metakaolin blended mortars – A mineralogical and mechanical study, (2013) 1–7. http://run.unl.pt/handle/10362/11256.
65. Luís Silva, Inês Flores-Colen, Nuno Vieira, Ana Barros Timmons, Natural Ageing Tests to Study In-service Different Façade Solutions—ETICS and Premixed One-Coat Rendered Walls, J. Civ. Eng. Archit. 10 (2016) 667–674. 10.17265/1934-7359/2016.06.005.10.17265/1934-7359/2016.06.005 ↗
66. Hydrotalcite-type anionic clays: Preparation, properties and applications10.1016/0920-5861(91)80068-K ↗
67. Synthesis of Al-rich hydrotalcite-like compounds by using the urea hydrolysis reaction — control of size and morphology10.1039/B302747N ↗
68. Pesticides adsorption-desorption on Mg-Al mixed oxides. Kinetic modeling, competing factors and recyclability10.1016/j.cej.2013.02.007 ↗
69. High temperature CO2 sorption over modified hydrotalcites10.1016/j.cej.2017.05.032 ↗
70. Prediction of elastic moduli development of cement mortars using early age measurements10.1061/(ASCE)MT.1943-5533.0001025 ↗