journal article·2021-06

Influence of synthetic waste fibres on drying shrinkage cracking and mechanical properties of adobe materials

I.M.G. Bertelsen, L.J. Belmonte, G. Fischer, L.M. Ottosen

Publisher page

Abstract

Abstract Earthen construction materials are often vulnerable to cracking due to excessive drying shrinkage deformations because of the high content of fine particles. Thus, fibrous materials can beneficially be added, not only to reduce such crack formation but also to improve the mechanical performance. In this study, recycled polyethylene fibres (R-PE) obtained from discarded fishing nets are added to adobe bricks in different fractions (1–5% by weight). Besides a chemical and geotechnical characterization of the raw materials used for the adobe production (Fine-grained Greenlandic sediments (GP) and a coarser gravel fraction (KG)), the investigation described in this paper includes the mechanical properties and restrained drying shrinkage deformations in manufactured, laboratory-scale adobe specimens. The crack formation due to restrained shrinkage is analysed using a digital image correlation (DIC) technique, which allows detailed, continuous monitoring and quantification of surface deformations. The results show that the evaluated adobe material can provide adequate mechanical properties, which makes the raw materials suitable for adobe brick production. From the mechanical tests, the addition of R-PE fibres resulted in improved flexural toughness, flexural strength and compressive strength. A detailed analysis using the DIC technique revealed that the addition of R-PE fibres significantly and quantitatively reduces the degree of shrinkage cracking.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Masonry and Concrete Structural Analysis · Building materials and conservation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Houben, Guillaud, Earth Construction: A Comprehensive Guide, 199410.3362/9781780444826 ↗
2. Experimental analysis of Pressed Adobe Blocks reinforced with Hibiscus cannabinus fibers10.1016/j.conbuildmat.2013.10.094 ↗
3. Gernot Minke, Building with Earth: Design and Technology of a Sustainable Architecture, 3rd ed., 201210.1515/9783034608725 ↗
4. A geotechnical perspective of raw earth building10.1007/s11440-016-0521-1 ↗
5. Experimental mechanical-damage assessment of earthen mixes reinforced with micro polypropylene fibers10.1016/j.conbuildmat.2018.11.261 ↗
6. Earth construction: Lessons from the past for future eco-efficient construction10.1016/j.conbuildmat.2011.10.054 ↗
7. The effects of waste marble dust and polypropylene fiber contents on mechanical properties of gypsum stabilized earthen10.1016/j.conbuildmat.2016.12.172 ↗
8. Laborel-Préneron · Plant aggregates and fibers in earth construction materials: A review · 2016 · 111 · 719
9. The effects of the fiber contents on the mechanic properties of the adobes10.1016/j.conbuildmat.2006.08.022 ↗
10. The influence of natural stabilizers and natural fibres on the mechanical properties of ancient Roman adobe bricks10.1016/j.culher.2009.11.012 ↗
11. Clay-based composite stabilized with natural polymer and fibre10.1016/j.conbuildmat.2010.01.008 ↗
12. Effect of reinforcing wool fibres on fracture and energy absorption properties of an earthen material10.1016/j.conbuildmat.2011.08.008 ↗
13. Influence of natural fiber dosage and length on adobe mixes damage-mechanical behavior10.1016/j.conbuildmat.2018.04.151 ↗
14. Waste-based natural fiber reinforcement of adobe mixtures: physical, mechanical, damage and durability performance assessment10.1016/j.jclepro.2020.122806 ↗
15. Plastic fibre reinforced soil blocks as a sustainable building material
16. G.R.L. Tavares, M.S. Magalhaes, Effect of recycled PET fibers inclusion on the shrinkage of adobe bricks, in: 3rd Int. Conf. Bio-Based Build. Mater., 2019: pp. 545–550.
17. An investigation on the production of construction brick with processed waste tea10.1016/j.buildenv.2005.05.004 ↗
18. Use of by-products as additives in adobe bricks: mechanical properties characterisation10.1016/j.conbuildmat.2016.01.044 ↗
19. Physical, mechanical and thermal behavior of adobe stabilized with glass fiber reinforced polymer waste10.1016/j.conbuildmat.2019.06.107 ↗
20. Investigation of fibre reinforced mud brick as a building material10.1016/j.conbuildmat.2004.07.013 ↗
21. Earthen construction materials: Assessing the feasibility of improving strength and deformability of compressed earth blocks using polypropylene fibers10.1016/j.matdes.2015.06.017 ↗
22. Experimental investigation of the strength properties of sand–clay mixtures reinforced with randomly distributed discrete polypropylene fibers10.1680/gein.2009.16.5.354 ↗
23. H. Binici, M.M. Köse, H. Temiz, B. Isik, Mechanical Properties of Clay with Fibers Used in Mud bricks, in: Kerpic08 – Learn. from Earthen Archit. Clim. Chang., 2008: pp. 1–8.
24. Drying, cracks and shrinkage evolution of a natural silt intended for a new earth building material. Impact of reinforcement10.1016/j.conbuildmat.2015.03.115 ↗
25. I.M.G. Bertelsen, L.J. Belmonte, L.M. Ottosen, Adobe bricks of Greenlandic fine-grained rock material, in: 3rd Int. Conf. Bio-Based Build. Mater., 2019.
26. Experimental investigation of non-stabilized and cement-stabilized rammed earth reinforcement by Waste Tire Textile Fibers (WTTFs)10.1016/j.conbuildmat.2020.120432 ↗
27. Polypropylene fiber reinforced Alker as a structurally stable and sustainable building material10.1016/j.jclepro.2020.123600 ↗
28. Determining the optimum addition of vegetable materials in adobe bricks10.1016/j.protcy.2016.01.077 ↗
29. Effect of flax fibers on early age shrinkage and cracking of earth concrete10.1016/j.conbuildmat.2020.119315 ↗
30. Physical, mechanical and durability properties of soil building blocks reinforced with natural fibres10.1016/j.conbuildmat.2015.10.069 ↗
31. Performance of composite soil reinforced with barley straw10.1016/j.cemconcomp.2004.09.013 ↗
32. Mechanical characterisation of traditional adobes from the north of Spain10.1016/j.conbuildmat.2011.02.003 ↗
33. Influence of jute fibers to improve flexural toughness, impact resistance and drying shrinkage cracking in adobe mixes
34. A procedure to assess the suitability of plaster to protect vernacular earthen architecture10.1016/j.culher.2012.04.005 ↗
35. An experimental study on shrinkage of earth plaster with natural fibres for straw bale buildings10.1080/19397038.2010.504379 ↗
36. A.E. Losini, P.G. Stampino, G. Dotelli, M. Bellotto, A.C. Grillet, M. Caruso, Evaluation of different raw earthen plasters stabilized with lime for bio-building exploitation, in: 3rd Int. Conf. Bio-Based Build. Mater., 2019: pp. 176–183.
37. Shrinkage of earth concrete amended with recycled aggregates and superplasticizer: impact on mechanical properties and cracks10.1016/j.matdes.2016.07.025 ↗
38. ASTM C1579-13, Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert), (2013) 1–7. doi:10.1520/C1579-06.2.
39. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review10.1088/0957-0233/20/6/062001 ↗
40. Study of cracking due to drying in coating mortars by digital image correlation10.1016/j.cemconres.2012.04.002 ↗
41. Digital image correlation (DIC) on fresh cement mortar to quantify settlement and shrinkage10.1016/j.acme.2018.10.003 ↗
42. Quantification of plastic shrinkage cracking in mortars using digital image correlation10.1016/j.cemconres.2019.05.006 ↗
43. Quantitative analysis of the influence of synthetic fibres on plastic shrinkage cracking using digital image correlation10.1016/j.conbuildmat.2018.11.268 ↗
44. Use of Greenlandic resources for the production of bricks
45. I.M.G. Bertelsen, L. Belmonte, W. Chen, L.M. Ottosen, Properties of bricks produced from Greenlandic marine sediments, in: Proc. Int. Conf. Port Ocean Eng. under Arct. Cond., 2015.
46. L.J. Belmonte, I.M.G. Bertelsen, Evaluation of the potential for using greenlandic marine sediments for brick production, in: Int. RILEM Conf. Mater. Syst. Struct. Civ. Eng., 2016.
47. Recycled nylon fibers as cement mortar reinforcement10.1016/j.conbuildmat.2015.01.075 ↗
48. Effectiveness of recycled nylon fiber from waste fishing net with respect to fiber reinforced mortar10.1016/j.conbuildmat.2017.04.134 ↗
49. Mechanical behavior of waste fishing net fiber-reinforced cementitious composites subjected to direct tension10.1016/j.jobe.2020.101622 ↗
50. Tensile behavior of alternative reinforcing materials as fiber reinforced cementitious mortar FRCM10.14419/ijet.v7i4.20.25933 ↗
51. Feasibility study on use of waste fishing nets as continuous reinforcements in cement-based matrix10.1016/j.conbuildmat.2020.121314 ↗
52. CEN-ISO/TS-17892-4, Geotechnical investigation and testing – Laboratory testing of soil – Part 4: Determination of particle size distribution, 2004. doi:10.1111/1467-8330.00183.10.1111/1467-8330.00183 ↗
53. CEN-ISO/TS-17892-3, Geotechnical investigation and testing – Laboratory testing of soil – Part 3 : Determination of particle density, 2004.
54. CEN-ISO/TS-17892-12, Geotechnical investigation and testing – Laboratory testing of soil – Part 12: Determination of Atterberg limits, 2004. doi:10.1111/1467-8330.00183.10.1111/1467-8330.00183 ↗
55. I.M.G. Bertelsen, L.M. Ottosen, Recycling of waste PE fishing nets as fibre reinforcement in gypsum-based composites, Accept. Fibers Polym. (n.d.).
56. UNI/EN-1015-3, Methods of test for mortar for masonry – Part 3: Determination of consistence of fresh mortar (by flow table), Eur. Stand. (1999)
57. UNI/EN-196-1, Methods of testing cement – Part 1 : Determination of strength, (2005).
58. ASTM C1018-97, Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) Withdrawn in 2006, (1997). doi:10.1520/D3762-9810.1520/D3762-98 ↗
59. A. Gribble, C. McLean, Geology for Civil Engineers, second ed., 2003
60. A. International, D2487-17 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System), ASTM Stand. Guid. (2017). doi:10.1520/D2487-1110.1520/D2487-11 ↗
61. P. Madsen, Råstofundersøgelser i teglindustrien. Danmarks overfladeråstoffer. Landjorden I, Akademiet for de tekniske videnskaber, 1983
62. Assessment of the mechanical performance of three varieties of pine needles as natural reinforcement of adobe10.1016/j.conbuildmat.2018.07.187 ↗
63. Microstructural characterization and mechanical properties of cement stabilised adobes10.1617/s11527-012-9833-2 ↗
64. The using of waste phosphogypsum and natural gypsum in adobe stabilization10.1016/j.conbuildmat.2007.01.027 ↗
65. Thermal, hydric and mechanical behaviours of adobes stabilized with cement10.1016/j.conbuildmat.2017.10.001 ↗
66. Earth building in Spain10.1016/j.conbuildmat.2005.02.006 ↗
67. Numerical strategies for prediction of drying cracks in heterogeneous materials: Comparison upon experimental results10.1016/j.engstruct.2010.12.013 ↗
68. Bertelsen · 2019