Early-age properties of alkali-activated slag and glass wool paste
Source abstract
Abstract
In this study, glass wool waste was utilized by means of alkali-activation with blast furnace slag. Reaction kinetics, workability, mechanical properties and autogenous shrinkage of alkali-activated slag and glass wool were comprehensively studied. Results indicated an optimal modulus (SiO2/Na2O) of the activator related to a long enough setting time and a high reaction degree of alkali-activated slag paste. The incorporation of glass wool as partial slag replacement did not necessarily lead to degradation in the performance of the pastes. While the compressive strength was always lower when glass wool was incorporated in the mixture, the flexural strength and workability could be improved with proper glass wool dosages. Autogenous shrinkage of blended pastes was always lower compared to the the mixture without glass wool. The results in this paper suggest that waste glass wool can be used as a precursor in slag-based alkali-activated system, resulting in improvements in the early-age properties of the paste such as a prolonged setting time and reduced shrinkage.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. A review on mineral waste for chemical-activated binders: mineralogical and chemical characteristics
2. Utilization of mineral wools as alkali-activated material precursor10.3390/ma9050312 ↗
3. Investigation of the usage of centrifuging waste of mineral wool melt (CMWW), contaminated with phenol and formaldehyde, in manufacturing of ceramic products10.1016/j.wasman.2014.01.010 ↗
4. New cements for the 21st century: The pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
5. Nanostructural evolution of alkali-activated mineral wools10.1016/j.cemconcomp.2019.103472 ↗
6. Pulverization of fibrous mineral wool waste10.1007/s10163-017-0692-3 ↗
7. Production of lightweight alkali activated mortars using mineral wools10.3390/ma12101695 ↗
8. Influence of activator type on reaction kinetics, setting time, and compressive strength of alkali-activated mineral wools
9. A comprehensive overview about the influence of different additives on the properties of alkali-activated slag - a guide for Civil Engineer10.1016/j.conbuildmat.2013.04.011 ↗
10. Influence of waste glass powder usage on the properties of alkali-activated slag mortars based on response surface methodology10.1016/j.conbuildmat.2018.06.040 ↗
11. Use of waste glass in alkali activated cement mortar10.1016/j.conbuildmat.2017.11.080 ↗
12. Recycling of glass cullet and glass powder in alkali-activated cement: mechanical properties and alkali-silica reaction10.1007/s12649-020-01102-5 ↗
13. Pore solution composition of alkali-activated slag/fly ash pastes10.1016/j.cemconres.2018.10.010 ↗
14. Utilization of mineral wool waste and waste glass for synthesis of foam glass at low temperature10.1016/j.conbuildmat.2019.04.226 ↗
15. Setting, strength, and autogenous shrinkage of alkali-activated fly ash and slag pastes: effect of slag content10.3390/ma11112121 ↗
16. Apply29Si,27Al MAS NMR and selective dissolution in identifying the reaction degree of alkali activated slag-fly ash composites10.1016/j.ceramint.2017.06.108 ↗
17. Mitigating the autogenous shrinkage of alkali-activated slag by metakaolin10.1016/j.cemconres.2019.04.016 ↗
18. Reproducible mini-slump test procedure for measuring the yield stress of cementitious pastes10.1617/s11527-017-1103-x ↗
19. NEN-EN 196-3 + A1, Methods of testing cement - Part 3: Determination of setting times and soundness, (2016).
20. NEN-EN 196-1, Methods of Testing Cement–Part 1: Determination of Strength, 2005., Eur. Comm. Stand. (2005).
21. ASTM C1698, Standard test method for autogenous strain of cement paste and mortar, (2013) 1–8. doi:10.1520/C1698-09.2.
22. Z. Li, M. Nedeljkovic, Y. Zuo, G. Ye, Autogenous shrinkage of alkali-activated slag-fly ash pastes, in: 5th Int. Slag Valoris. Symp., Leuven, 2017, pp. 369–372.
23. Measurement of the E-modulus of cement pastes and mortars since casting, using a vibration based technique10.1617/s11527-011-9750-9 ↗
24. Effects of dosage and modulus of water glass on early hydration of alkali-slag cements10.1016/S0008-8846(01)00717-7 ↗
25. Zuo · 2019
26. Effects of activator properties and GGBFS/FA ratio on the structural build-up and rheology of AAC10.1016/j.cemconres.2020.106253 ↗
27. Mechanisms of autogenous shrinkage of alkali-activated slag and fly ash pastes10.1016/j.cemconres.2020.106107 ↗
28. Internal curing by superabsorbent polymers in alkali-activated slag10.1016/j.cemconres.2020.106123 ↗
29. Co-existence of aluminosilicate and calcium silicate gel characterized through selective dissolution and FTIR spectral subtraction10.1016/j.cemconres.2015.01.006 ↗
30. NEN-EN 197-1, Cement - Part 1: Composition, specifications and conformity criteria for common cements, (2011).
31. A. C150-07, Standard Specification for Cement, 04 (2007) 1–8. doi:10.1520/C0150.10.1520/C0150 ↗
32. Neville · 2011
33. GB 175-2007, Common Portland Cement, (2007).
34. Mechanical properties of alkali-activated concrete: a state-of-the-art review10.1016/j.conbuildmat.2016.09.121 ↗
35. Time-dependent material properties and reinforced beams behavior of two alkali-activated types of concrete10.1002/suco.201900235 ↗
36. Drying and autogenous shrinkage of pastes and mortars with activated slag cement10.1016/j.cemconres.2007.11.002 ↗
37. Drying shrinkage of alkali-activated slag and fly ash concrete; A comparative study with ordinary Portland cement concrete
38. Prediction of the autogenous shrinkage and microcracking of alkali-activated slag and fly ash concrete10.1016/j.cemconcomp.2020.103913 ↗
39. Nedeljković · 2019
40. ACI (American Concrete Institute), Building code requirements for structural concrete and commentary, (2011).
41. S. Uppalapati, S. Joseph, Ö. Cizer, Autogenous shrinkage and strength development of alkali-activated slag/fly ash mortar blends, in: 5th Int. Slag Valoris. Symp., 2017, pp. 393–396.
42. Drying shrinkage in alkali-activated binders – a critical review10.1016/j.conbuildmat.2018.09.125 ↗
43. Lura · 2003
44. Effect of supplementary materials on the autogenous shrinkage of cement paste10.3390/ma13153367 ↗
45. Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers10.1016/j.conbuildmat.2020.120985 ↗