Knowledge-enhanced data-driven models for quantifying the effectiveness of PP fibers in spalling prevention of ultra-high performance concrete
Source abstract
Abstract
Abstract Ultra-high performance concrete (UHPC) shows volumetric instability at high temperatures because of explosive spalling. Polypropylene (PP) fibers are effective in mitigating the explosive spalling of UHPC; however, the threshold PP fiber dosage to prevent explosive spalling of UHPC remains unascertained. In this work, a knowledge-enhanced data-driven machine learning method is proposed to quantify the effectiveness of PP fibers in preventing fire-induced spalling of UHPC. Based on the knowledge-enhanced technique, the training data size is increased from 244 to 1642. The prediction accuracy of the artificial neural network (ANN) and extreme gradient boosting (XGBoost) models on 54 groups of unseen data is increased by more than 10% after the training data augment. The well-validated ANN model is then used to determine the threshold PP fiber dosage of UHPC tunnel lining under hydrocarbon fire conditions. The analysis results show that as high as 3.5 kg/m3 PP fibers are required to eliminate explosive spalling of UHPC, but this critical dosage can be lowered to 2.5 kg/m3 by limiting the silica fume replacement level.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Engineering and Material Science Research · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. JSCE, Recommendations for design and construction of ultra high strength fiber reinforced concrete structures (draft), JSCE Tokyo, Japan, 2004.
2. Bond characterization of UHPC overlays for concrete bridge decks: Laboratory and field testing10.1016/j.conbuildmat.2018.09.167 ↗
3. Preventive effects of polypropylene and jute fibers on spalling of UHPC at high temperatures in combination with waste porous ceramic fine aggregate as an internal curing material10.1016/j.conbuildmat.2019.02.056 ↗
4. High-temperature behaviour of HPC with polypropylene fibres: From spalling to microstructure10.1016/S0008-8846(01)00596-8 ↗
5. A new perspective on nature of fire-induced spalling in concrete10.1016/j.conbuildmat.2018.06.204 ↗
6. Development of ultra-high performance concrete with high fire resistance10.1016/j.conbuildmat.2018.05.241 ↗
7. Effect of Temperature on Thermal Properties of Ultrahigh-Performance Concrete10.1061/(ASCE)MT.1943-5533.0003286 ↗
8. Development of an experimental apparatus aimed at performing thermal-induced spalling tests based on a propane gas burner through tests on ultra-high performance concrete10.1016/j.conbuildmat.2020.118395 ↗
9. Experimental investigation of the effect of silica fume on the thermal spalling of reactive powder concrete10.1016/j.conbuildmat.2017.08.086 ↗
10. Mechanism of PVA fibers in mitigating explosive spalling of engineered cementitious composite at elevated temperature10.1016/j.cemconcomp.2018.07.015 ↗
11. Experimental insight into spalling behavior of concrete tunnel linings under fire loading10.1007/s11440-008-0069-9 ↗
12. CEN, Eurocode 2: Design of concrete structures-Part 1-2: General rules-Structural fire design, London, 2004.
13. Neural network models to predict explosive spalling of PP fiber reinforced concrete under heating
14. Experimental study on the spalling behaviour of ultra-high strength concrete in fire10.1016/j.conbuildmat.2020.120334 ↗
15. Spalling prevention of ultra-high performance concrete: comparative effectiveness of polyethylene terephthalate and polypropylene fibers10.1061/(ASCE)MT.1943-5533.0003980 ↗
16. An elastoplastic damage constitutive model of concrete considering the effects of dehydration and pore pressure at high temperatures10.1617/s11527-020-1450-x ↗
17. On reliable predicting risk and nature of thermal spalling in heated concrete10.1016/j.acme.2018.01.013 ↗
18. A Simplified Model to Predict Thermo-Hygral Behaviour and Explosive Spalling of Concrete10.3151/jact.17.419 ↗
19. Multiphysics Lattice Discrete Particle Model for the simulation of concrete thermal spalling10.1016/j.cemconcomp.2019.103457 ↗
20. Numerical analysis of heating rate effect on spalling of high-performance concrete under high temperature conditions10.1016/j.conbuildmat.2017.07.023 ↗
21. Numerical simulation of polypropylene fibres in concrete materials under fire conditions10.1016/j.compstruc.2015.03.012 ↗
22. Hydrothermal model for predicting fire-induced spalling in concrete structural systems10.1016/j.firesaf.2008.09.001 ↗
23. An application of a damage constitutive model to concrete at high temperature and prediction of spalling10.1016/j.ijsolstr.2005.06.016 ↗
24. Elastic-Plastic Damage Model to Predict Pore-Pressure Effect on Concrete Behavior at Elevated Temperatures
25. Machine learning-based prediction for compressive and flexural strengths of steel fiber-reinforced concrete10.1016/j.conbuildmat.2020.121117 ↗
26. Efficient machine learning models for prediction of concrete strengths10.1016/j.conbuildmat.2020.120950 ↗
27. Machine learning prediction of mechanical properties of concrete: Critical review10.1016/j.conbuildmat.2020.119889 ↗
28. Machine learning in concrete strength simulations: Multi-nation data analytics10.1016/j.conbuildmat.2014.09.054 ↗
29. Prediction of concrete coefficient of thermal expansion and other properties using machine learning10.1016/j.conbuildmat.2019.05.006 ↗
30. Estimation of the compressive strength of concretes containing ground granulated blast furnace slag using hybridized multi-objective ANN and salp swarm algorithm10.1016/j.conbuildmat.2020.118676 ↗
31. Prediction of elastic modulus of normal and high strength concrete by support vector machine10.1016/j.conbuildmat.2010.01.006 ↗
32. Modelling the fresh properties of self-compacting concrete using support vector machine approach10.1016/j.conbuildmat.2015.12.035 ↗
33. Artificial neural networks for the spalling classification & failure prediction times of high strength concrete columns, Journal of Structural10.1260/2040-2317.5.3.203 ↗
34. Leveraging artificial intelligence to assess explosive spalling in fire-exposed RC columns
35. Prediction of Explosive Spalling of Heated Steel Fiber Reinforced Concrete using Artificial Neural Networks10.3151/jact.18.227 ↗
36. Van Rossum · 2009
37. M.A. Nielsen, Neural networks and deep learning, Determination press2015.
38. T. Chen C. Guestrin Xgboost: A scalable tree boosting system Proceedings of the 22nd acm sigkdd international conference on knowledge discovery and data mining 2016 785 794.10.1145/2939672.2939785 ↗
39. ISO, Fire resistance tests-elements of building construction, ISO 834, 1975.
40. Concrete propensity to fire spalling: Testing and observations, MATEC Web of Conferences
41. Effects of elevated temperature exposure on heating characteristics, spalling, and residual properties of high performance concrete10.1007/BF02481556 ↗
42. Effect of specimen size and loading conditions on spalling of concrete10.1002/fam.931 ↗
43. Explosive spalling of concrete in fire
44. Effects of various fibres on high-temperature spalling in high-performance concrete10.1016/j.conbuildmat.2014.07.068 ↗
45. Bosnjak · 2014
46. Mechanical properties of high-strength concrete after fire10.1016/j.cemconres.2003.11.007 ↗
47. Geopolymer and Portland cement concretes in simulated fire10.1680/macr.9.00110 ↗
48. Effect of aggregate size on spalling of geopolymer and Portland cement concretes subjected to elevated temperatures10.1016/j.conbuildmat.2012.04.120 ↗
49. Effects of elevated temperatures on properties of concrete10.1016/j.firesaf.2007.01.003 ↗
50. Performance of thermally damaged fibre reinforced concretes10.1016/j.conbuildmat.2008.08.009 ↗
51. Influence of steel and/or polypropylene fibres on the behaviour of concrete at high temperature: Spalling, transfer and mechanical properties10.1016/j.conbuildmat.2016.11.120 ↗
52. Mechanical characteristics of self-consolidating concretes exposed to elevated temperatures10.1061/(ASCE)0899-1561(2007)19:8(648) ↗
53. An exploratory study on high-volume fly ash concrete incorporating silica fume subjected to thermal loads10.1016/j.jclepro.2014.09.018 ↗
54. Prediction of spalling in fibre-reinforced high strength concrete at elevated temperatures10.1617/s11527-013-0082-9 ↗
55. Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures10.1016/j.cemconres.2011.07.001 ↗
56. Steel fibers pull-out after exposure to high temperatures and its contribution to the residual mechanical behavior of high strength concrete10.1016/j.conbuildmat.2017.12.129 ↗
57. Compressive strength and failure behaviour of fibre reinforced concrete at elevated temperatures10.12989/acc.2015.3.4.283 ↗
58. A machine learning approach to predict explosive spalling of heated concrete10.1007/s43452-020-00135-w ↗
59. An approach for modelling concrete spalling in finite strains10.1016/j.matcom.2009.05.011 ↗
60. Hertz · 1984
61. Test method for spalling of fire exposed concrete10.1016/j.firesaf.2005.04.001 ↗
62. Limits of spalling of fire-exposed concrete10.1016/S0379-7112(02)00051-6 ↗
63. Concrete spalling assessment methodologies and polypropylene fibre toxicity analysis in tunnel fires10.1680/stco.2008.9.1.11 ↗
64. On the mechanism of polypropylene fibres in preventing fire spalling in self-compacting and high-performance cement paste10.1016/j.cemconres.2007.11.010 ↗
65. Fibers, percolation, and spalling of high-performance concrete
66. An experimental method for assessing the spalling sensitivity of concrete mixture submitted to high temperature10.1016/j.cemconcomp.2012.04.002 ↗
67. Effects and interactions of temperature and stress-level related damage on permeability of concrete10.1016/j.cemconres.2006.09.015 ↗