Mechanical analysis of asphalt pavement based on bimodulus elasticity theory
Source abstract
Abstract
Abstract The bimodulus elasticity theory was introduced into pavement mechanical analysis for the first time in this study. By developing an efficient finite element method of bimodulus structural calculation for asphalt pavement, the mechanical analysis of typical asphalt pavement structure in China was carried out. The results indicated that the mechanical properties of asphalt pavement based on the bimodulus theory are nonlinear and anisotropy. Besides, the deviation between the mechanical response calculation based on bimodulus elasticity theory and the traditional linear case was more than 50%. Moreover, a great deviation on the normal stress and strain was reported, but in the case of the shear stress and shear strain, a small error was found. Especially the mechanical response of the key points in pavement design was greatly affected by the difference in tensile and compressive moduli of surface layer and base cemented mixture, which had its maximum deviation is up to 280%. Due to the significant and inevitable difference in the tensile and compression modulus of pavement materials, the bimodulus elasticity theory is suggested to be used in the mechanical calculation of asphalt pavement design.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Material Properties and Failure Mechanisms · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Evaluation of tensile young’s modulus and poisson’s ratio of a bi-modular rock from the displacement measurements in a brazilian test10.1007/s00603-017-1345-5 ↗
2. Accelerated proximal gradient method for bi-modulus static elasticity
3. Anisotropy and compression/tension asymmetry of PP containing soft and hard particles and short glass fibers10.3144/expresspolymlett.2015.61 ↗
4. Tension-compression asymmetry effects on the plastic response in bending: new theoretical and numerical results10.1016/j.mechrescom.2020.103596 ↗
5. Methods of determination of young’s modulus and tensile, flexural & compressive strength
6. Continuous constitutive model for bimodulus materials with meshless approach10.1016/j.apm.2018.09.004 ↗
7. Numerical assessment of the analytical models used to determine flexural and shear moduli in I-Beams when the tensile and compressive moduli are different10.1016/j.polymertesting.2019.106154 ↗
8. Determining the elastic modulus of thin films using a buckling-based method: computational study10.1088/0022-3727/42/17/175506 ↗
9. Ambartsumyan · 1986
10. A new computational framework for materials with different mechanical responses in tension and compression and its applications10.1016/j.ijsolstr.2016.07.009 ↗
11. Microbuckling of fibrin provides a mechanism for cell mechanosensing10.1098/rsif.2015.0320 ↗
12. The basic equations of the theory of elasticity for materials with different tensile and compressive stiffness
13. A comparative study between the results of an innovative design methodology by limiting surface deflection and AASHTO design method
14. Tension-compression asymmetry at finite strains: a theoretical model and exact solutions10.1016/j.jmps.2020.104084 ↗
15. An electroelastic solution for functionally graded piezoelectric material beams with different moduli in tension and compression10.1177/1045389X17742734 ↗
16. Application of biparametric perturbation method to functionally graded thin plates with different moduli in tension and compression
17. Effect of bimodularity on the stress state of a variable cross-section reinforced beam10.4028/www.scientific.net/MSF.974.646 ↗
18. Preliminary investigation of the relationship between HMA compressive and tensile dynamic modulus10.1016/j.conbuildmat.2016.09.143 ↗
19. Variational principles and the related bounding theorems for bi-modulus materials10.1016/j.jmps.2014.08.006 ↗
20. Nonlinear large deflection buckling analysis of compression rod with different moduli10.1080/15376494.2017.1410898 ↗
21. Nonlinear large deflection buckling analysis of compression rod with different moduli10.12989/sem.2015.54.5.855 ↗
22. Structural topology optimization involving bi-modulus materials with asymmetric properties in tension and compression10.1007/s00466-018-1597-2 ↗
23. Analysis of 2-D bimodular materials and wrinkled membranes based on the parametric variational principle and co-rotational approach10.1002/nme.4649 ↗
24. A gradient based algorithm to solve inverse plane bimodular problems of identification10.1016/j.jcp.2017.11.005 ↗
25. Topology optimization of continuum structures with bi-modulus materials10.1080/0305215X.2013.765001 ↗
26. An efficient numerical method to solve 2-D interval bi-modular problems via orthogonal polynomial expansion10.1016/j.apm.2020.03.032 ↗
27. Bi-modulus materials consistent with a stored energy function: Theory and numerical implementation10.1016/j.compstruc.2019.106176 ↗
28. A 3D PVP co-rotational formulation for large-displacement and small-strain analysis of bi-modulus materials10.1016/j.finel.2015.11.002 ↗
29. Estimating tensile and compressive moduli of asphalt mixture from indirect tensile and four-point bending tests10.1061/(ASCE)MT.1943-5533.0003476 ↗
30. Comparisons of synchronous measurement methods on various moduli of asphalt mixtures10.1016/j.conbuildmat.2017.09.193 ↗
31. Research on the anti-icing properties of silicone modified polyurea coatings (SMPC) for asphalt pavement10.1016/j.conbuildmat.2019.117793 ↗
32. Packing theory and volumetrics-based aggregate gradation design method10.1061/(ASCE)MT.1943-5533.0003192 ↗
33. Synchronous testing method for tension and compression moduli of asphalt mixture under dynamic and static loading states10.1061/(ASCE)MT.1943-5533.0002414 ↗
34. Synchronous testing method for tensile and compressive moduli of asphalt mixture based on splitting test
35. Comparative analysis of tensile compression flexural static modulus and dynamic modulus of cement-stabilized macadam
36. Recycling of polyethylene terephthalate (PET) plastic bottle wastes in bituminous asphaltic concrete10.1080/23311916.2015.1133480 ↗
37. Characteristics of moduli decay for the asphalt mixture under different loading conditions10.3390/app8050840 ↗
38. Investigation of the fatigue modulus decay in cement stabilized base material by considering the difference between compressive and tensile modulus10.1016/j.conbuildmat.2019.07.003 ↗
39. An innovative design methodology of pavement designby limiting surface deflection
40. Application of construction demolition waste for improving performance of subgrade and subbase layers
41. Molecular dynamics simulation of physicochemical properties of the asphalt model10.1016/j.fuel.2015.09.045 ↗
42. Q. Pan, J. Zheng, P. Wen, Theoretical study on generalized elastic laws of elastic theory with different modulus, J. Hunan Univ.(Natural Sciences) 46(1) (2019) 93-100. (in Chinese).
43. Convergence analysis of a finite element method based on different moduli in tension and compression10.1016/j.ijsolstr.2009.07.003 ↗
44. Efficient algorithm for 3D bimodulus structures10.1007/s10409-019-00909-3 ↗
45. JTG D50–2017 · 2017
46. Standardization to evaluate the lasting capacity of rubberized asphalt mixtures with different testing approaches10.1016/j.conbuildmat.2020.121341 ↗
47. Comparison of tensile and compressive relaxation modulus of asphalt mixes under various testing conditions10.1617/s11527-014-0489-y ↗
48. New structure design of durable asphalt pavement based on life increment
49. Consideration of permeable pavement in landscape architecture
50. Green interlocking paving units10.1016/j.conbuildmat.2018.04.061 ↗