journal article·2021-11

Use of an industrial solid waste as a pigment in clay bricks and its effects on the mechanical properties

J.D. Bautista-Marín, A. Esguerra-Arce, J. Esguerra-Arce

Publisher page

Abstract

Abstract The addition of mill scale, an important steel making byproduct, as pigment to fired clay bricks was investigated, as well as its effects on the physical, mechanical and microstructural properties. For this purpose, bricks were manufactured using clay from the Cundiboyacense highlands -a geographic region of Colombia- with the addition of mill scale at 0, 5, 10 and 15%. Once the bricks had been sintered, their density, porosity, water absorption, compressive and flexural resistance were measured. In addition, microstructural analysis using X-ray diffraction, as well as thermogravimetric analysis and differential scanning calorimetry analyses, were carried out on the four types of bricks, to facilitate comparison between them. Variations in hue between the four types of bricks, from dull orange to grayish red, an average decrease in flexural strength of 33% and an increase in average porosity of 4% compared to traditional bricks were observed. Furthermore, it was found that the added mill scale does not react chemically with the clay, being a stable addition. Additionally, mill scale oxidizes to hematite during the firing of the bricks, ultimately becoming a good pigment that changes its hue depending on the added quantity. Therefore, it was concluded that the addition of mill scale to bricks enables the reuse of this industrial by-product and reduces the consumption of clay (which is a non-renewable resource), while complying with minimum standards of compressive strength, flexural strength and porosity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Pigment Synthesis and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Environmental degradations during clay mining and beneficiation
2. The white colour in Etruscan polychromes on terracotta: spectroscopic identification of kaolin10.1016/j.culher.2007.09.001 ↗
3. Permo-Triassic aeolian red clay of southwestern England and its palaeoenvironmental implications10.1016/j.aeolia.2021.100726 ↗
4. Mecanismo químico de la formación del color en los ladrillos (Chemical mechanism of color formation in bricks)10.3989/mc.1966.v16.i123.1704 ↗
5. The color in the vernacular bioclimatic architecture in Mediterranean region10.1016/j.egypro.2017.08.142 ↗
6. Synthesis of high-performance copper barium silicate composite pigment from waste iron ore tailings10.1016/j.ceramint.2021.06.230 ↗
7. Synthesis of iron red hybrid pigments from oil shale semi-coke waste10.1016/j.apt.2020.03.020 ↗
8. Preparation of nanometer-sized black iron oxide pigment by recycling of blast furnace flue dust10.1016/j.jhazmat.2009.12.060 ↗
9. Recycling the insoluble residue from titania slag dissolution (tionite) in clay bricks10.1016/j.ceramint.2010.08.007 ↗
10. Production of bricks from waste materials - a review10.1016/j.conbuildmat.2013.05.043 ↗
11. Effect of heating rate on gas emissions and properties of fired clay bricks and fired clay bricks incorporated with cigarette butts10.1016/j.clay.2014.12.005 ↗
12. Evaluation of technological properties of fired clay bricks containing pyrrhotite ash10.1016/j.conbuildmat.2020.121312 ↗
13. Valorization and inertization of galvanic sludge waste in clay bricks10.1016/j.clay.2014.12.022 ↗
14. Evaluación de la reducibilidad de la calamina proveniente de una siderúrgica de la región, por reducción con monóxido de carbono
15. An innovative magnetic oxide dispersion-strengthened iron compound obtained from an industrial byproduct, with a view to circular economy10.1016/j.jclepro.2020.122362 ↗
16. Reuse of red powder of steel plants as fine addition in ceramic bricks manufacture10.2495/SC120922 ↗
17. Synergistic effect of fly ash and glass cullet additive on properties of fire clay bricks10.1016/j.jobe.2021.102942 ↗
18. Effect of waste-based micro cellulose fiber as pore maker on characteristics of fired clay bricks10.1016/j.conbuildmat.2021.124298 ↗
19. Assessment of two clayey materials from northwest Sardinia (Alghero district, Italy) with a view to their extraction and use in traditional brick production10.1016/j.clay.2013.11.030 ↗
20. Y.E. Ramírez Calderón, C.A. Nieto Rangel, J. Llop Pla, E. Barrachina Albert, J.S. Valencia Rios, J.B. Carda Castelló. Development of ceramic porcelain stoneware pastes by the revalorization of Colombian clays subjected to bleaching process. Appl. Clay Sci. 178 (2019) 105128. https://doi.org/10.1016/j.clay.2019.105128.10.1016/j.clay.2019.105128 ↗
21. Mechanical properties and phases determination of low carbon steel oxide scales formed at 1200 °C in air10.1016/j.surfcoat.2015.10.028 ↗
22. Characteristics of clays and properties of building ceramics in the state of Rio de Janeiro, Brazil10.1016/j.conbuildmat.2007.01.006 ↗
23. Catalytic synthesis of nanosized hematite particles in solution10.1016/j.matchemphys.2006.10.001 ↗
24. Synthetic magnetite, maghemite, and haematite activation of persulphate for orange G degradation10.1016/j.jconhyd.2018.07.004 ↗
25. Synthesis of maghemite (γ-Fe2O3) nanoparticles by wet chemical method at room temperature10.1016/j.matlet.2010.03.064 ↗
26. Surface complex characteristics of synthetic maghemite and hematite in aqueous suspensions10.1016/j.jcis.2004.11.005 ↗
27. Recovery of iron from direct reduction iron sludge and biosynthesis of magnetite nanoparticles using green tea extract10.1016/j.colsurfa.2021.126675 ↗
28. Kinetics of the oxidation of magnetite using simultaneous TG/DSC10.1023/A:1025053828639 ↗
29. Vibrational spectroscopic characterization of hematite, maghemite, and magnetite thin films produced by vapor deposition
30. Historical hematite pigment: synthesis by an aqueous sol–gel method, characterization and application for the colouration of ceramic glazes10.1016/j.ceramint.2014.11.145 ↗
31. Grey hematite photoanodes decrease the onset potential in photoelectrochemical water oxidation10.1016/j.scib.2021.02.016 ↗
32. Kinetic and thermodynamic assessment on isoniazid/montmorillonite adsorption10.1016/j.clay.2018.08.009 ↗
33. Kinetics and mechanism of three stages of thermal transformation of kaolinite to metakaolinite10.1016/j.powtec.2014.05.047 ↗
34. Harbor Dredged Sediment as raw material in fired clay brick production: characterization and properties
35. The formation of silica high temperature polymorphs from quartz: Influence of grain size and mineralising agents10.1016/j.jeurceramsoc.2015.08.015 ↗
36. An insight on the weakening of the interlayer bonds in a Cameroonian kaolinite through DMSO intercalation10.1016/j.clay.2013.08.010 ↗
37. Oxide scales growth of low-carbon steel at high temperaturas10.1016/j.jmatprotec.2004.04.172 ↗
38. Characteristics of porous mullite developed from clay and AlF3·3H2O10.1016/j.jeurceramsoc.2018.03.002 ↗
39. Abdel Monem Mohamed Soltan, Katharina Pöhler, Florian Fuchs, Fawzia Abd EL-Raoof, Baher Abdel-Hamid El-Kaliouby, Andreas Koenig, Herbert Pöllmann. Clay-bricks from recycled rock tailings. Ceram. Int. 42 (2016) 16685–16696. http://dx.doi.org/10.1016/j.ceramint.2016.07.110.10.1016/j.ceramint.2016.07.110 ↗
40. Solid solution limit of Fe2O3 in mullite crystals, produced from kaolin by solid state reactions10.1016/j.ceramint.2018.01.178 ↗
41. Characterization of clays and preparation of ceramic pastes for the manufacture of roofing tiles and bricks in the region of Barichara, Santander
42. Mechanical properties of clay masonry units: destructive and ultrasonic testing10.1016/j.conbuildmat.2019.05.166 ↗
43. Dynamic compressive material properties of clay bricks at different strain rates10.1016/j.conbuildmat.2018.10.150 ↗
44. Effects of incorporating wood sawdust on the firing program and the physical and mechanical properties of fired clay bricks10.1016/j.jobe.2020.102106 ↗
45. Eco-friendly fired clay bricks incorporated with porcelain ceramic sludge10.1016/j.conbuildmat.2019.116754 ↗
46. Recycling of spent industrial soil in manufacturing process of clay brick10.1016/j.psep.2020.08.004 ↗