Effect of high volume fly ash and micro-steel fiber on flexural toughness and durability properties in self-compacting lightweight mortar (SCLM)
Source abstract
Abstract
In this study, high volumes of fly ash and micro-steel fiber were used to improve lightweight aggregate mixes' strength and durability properties that can be used in the prefabrication industry. The developed composite can be used in roof truss flooring of steel structures and bridge decks. Although the unit weight of the mixtures was reduced below 2000 kg/m 3 , micro steel fibers were used to improve the behaviour against seismic effects. The increase in fly ash content increased the porosity, water absorption, and water penetration depths of the mixes. The increase in the steel fiber content created a micro-filter effect, reducing the water absorption and water penetration depths. The hardened unit weights of the mixes vary between 1305–1723 kg/m 3 , while their 91-day compressive strength varies between 30.9 and 46.4 MPa. It has been observed that the mixes using steel fiber are in the medium and good class in the residual strength factors specified in ASTM C 1018. The carbonation depth of the mixes using 50% fly ash increased more than 5.5 times compared to the reference mix. After the freeze–thaw effect, spills occurred on the surfaces of the mixes due to fiber corrosion.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Effect of tidal zone and seawater attack on high-volume fly ash pastes enhanced with metakaolin and quartz powder in the marine environment10.1016/j.micromeso.2021.111261 ↗
2. A stochastic optimisation model for biomass outsourcing in the cement manufacturing industry with production planning constraints10.1016/j.energy.2018.11.114 ↗
3. IPCC, Special Report on Carbon Dioxide Capture and Storage. Prepared by Working Group III of the Intergovernmental Panel on Climate Change., Environ. Sci. Technol. 45 (2005) 5710–5716.
4. Application of a system dynamics approach for assessment and mitigation of CO2 emissions from the cement industry10.1016/j.jenvman.2005.08.007 ↗
5. Combined impact of silicate-amorphicity and MgO-reactivity on the performance of Mg-silicate cement10.1016/j.conbuildmat.2018.08.171 ↗
6. Thermal activation of air cooled slag to create one-part alkali activated cement10.1016/j.ceramint.2018.05.089 ↗
7. Eco-efficient cements: potential economically viable solutions for a low-CO2 cement-based materials industry10.1016/j.cemconres.2018.03.015 ↗
8. UN projects world population to reach 8.5 billion by 2030, driven by growth in developing countries | | UN News, (n.d.). https://news.un.org/en/story/2015/07/505352-un-projects-world-population-reach-85-billion-2030-driven-growth-developing (accessed 9 July 2021).
9. A brief on high-volume Class F fly ash as cement replacement – a guide for Civil Engineer10.1016/j.ijsbe.2015.10.002 ↗
10. An exploratory study on high-volume fly ash concrete incorporating silica fume subjected to thermal loads10.1016/j.jclepro.2014.09.018 ↗
11. H.H. Haynes, An overview of ACI report on high volume fly ash concrete, in: Am. Concr. Institute, ACI Spec. Publ., 2015: pp. 301–310.
12. Acid, alkali and chloride resistance of high volume fly ash concrete10.17485/ijst/2015/v8i19/72266 ↗
13. Effect of mix design inputs, curing and compressive strength on the durability of Na2SO4-activated high volume fly ash concretes10.1016/j.cemconcomp.2018.03.028 ↗
14. Microstructure and durability properties of lightweight and high-performance sustainable cement-based composites with rice husk ash10.1007/s11356-021-14489-y ↗
15. Possibilities of disposing silica fume and waste glass powder, which are environmental wastes, by using as a substitute for Portland cement10.1007/s11356-020-12195-9 ↗
16. The optimization of calcareous fly ash-added cement containing grinding aids and strength-improving additives
17. The effect of nano silica on the properties of cement mortars containing micro silica at elevated temperatures
18. M. Bolhassani, M. Samani, Effect of type, size, and dosage of nanosilica and microsilica on properties of cement paste and mortar, ACI Mater. J. 112 (2015) 259–266. doi:10.14359/51686995.10.14359/51686995 ↗
19. M. Mohit, Y. Sharifi, Ceramic waste powder as alternative mortar-based cementitious material, ACI Mater. J. 116 (2019) 107–116. doi:10.14359/51716819.10.14359/51716819 ↗
20. Characteristics of hemp fibre reinforced foam concretes with fly ash and Taguchi optimization10.1016/j.conbuildmat.2021.123607 ↗
21. The beneficial effect of the addition of fly ash on reduction of the size of microcracks in the ITZ of concrete composites under dynamic loading10.3390/en14030668 ↗
22. Studies of fracture toughness in concretes containing fly ash and silica fume in the first 28 days of curing10.3390/ma14020319 ↗
23. Rheology of cement pastes with siliceous fly ash and the csh nano-admixture10.3390/ma14133640 ↗
24. Validation of the favorable quantity of fly ash in concrete and analysis of crack propagation and its length – using the crack tip tracking (CTT) method – In the fracture toughness examinations under Mode II, through digital image correlation10.1016/j.conbuildmat.2021.122362 ↗
25. Evaluation of fracture processes under shear with the use of DIC technique in fly ash concrete and accurate measurement of crack path lengths with the use of a new crack tip tracking method10.1016/j.measurement.2021.109632 ↗
26. A step towards durable, ductile and sustainable concrete: simultaneous incorporation of recycled aggregates, glass fiber and fly ash10.1016/j.conbuildmat.2020.118980 ↗
27. Combined effects of supplementary cementitious materials (silica fume, GGBS, fly ash and rice husk ash) and steel fiber on the hardened properties of recycled aggregate concrete10.1016/j.conbuildmat.2020.120636 ↗
28. Synergistic effects of fly ash and hooked steel fibers on strength and durability properties of high strength recycled aggregate concrete10.1016/j.resconrec.2021.105444 ↗
29. Influence of different fibers on mechanical and durability performance of concrete with silica fume10.1002/suco.201900422 ↗
30. Mechanical properties of self-compacted fiber concrete mixes10.1016/j.hbrcj.2013.05.012 ↗
31. A review on performance of self-compacting concrete – use of mineral admixtures and steel fibres with artificial neural network application10.1016/j.conbuildmat.2020.120215 ↗
32. Influence of temperature on yield value of highly flowable micromortars made with sulfonate-based superplasticizers10.1016/j.cemconres.2004.04.025 ↗
33. Mechanical properties of silica fume modified high-volume fly ash rubberized self-compacting concrete10.3390/su13105571 ↗
34. Behavior of self- compacting concrete incorporating calcined pyrophyllite as supplementary cementitious material10.34118/jbms.v7i1.744 ↗
35. Cleaner production of self-compacting concrete with selected industrial rejects-an overview10.1007/s12633-020-00636-6 ↗
36. Study of the recycled aggregates nature’s influence on the aggregate-cement paste interface and ITZ10.1016/j.conbuildmat.2014.06.076 ↗
37. Statistical models for the development of optimized furnace slag lightweight aggregate self-consolidating concrete10.1016/j.cemconcomp.2014.09.009 ↗
38. Application of statistical models in proportioning lightweight self-consolidating concrete with expanded clay aggregates10.1016/j.conbuildmat.2014.05.027 ↗
39. An experimental study on the workability of self-compacting lightweight concrete10.1016/j.conbuildmat.2008.08.023 ↗
40. Physico-mechanical, microstructural and dynamic properties of newly developed artificial fly ash based lightweight aggregate - rubber concrete composite10.1016/j.compositesb.2015.05.005 ↗
41. Lightweight aggregate concrete fiber reinforcement - a review10.1016/j.conbuildmat.2012.07.071 ↗
42. Early-age autogenous and drying shrinkage behavior of cellulose fiber-reinforced cementitious materials10.1016/j.cemconcomp.2010.10.018 ↗
43. Modification of properties of structural lightweight concrete with steel fibres10.3846/13923730.2011.553923 ↗
44. Some characteristics of high strength fiber reinforced lightweight aggregate concrete10.1016/S0958-9465(02)00016-1 ↗
45. Investigation on flexural toughness evaluation method of steel fiber reinforced lightweight aggregate concrete10.1016/j.conbuildmat.2016.11.101 ↗
46. Material characteristics of high performance lightweight concrete reinforced with PVA10.1016/j.conbuildmat.2006.10.010 ↗
47. ASTM, ASTM C150 / C150M-19a Standard Specification for Portland Cement, Annu. B. ASTM Stand. (2019) 10. http://www.astm.org/cgi-bin/resolver.cgi?C150C150M.
48. ASTM C618-17a, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, Annu. B. ASTM Stand. (2017).
49. ASTM, A820 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete,. http://www.cqvip.com/qk/92317a/200307/8109835.html.
50. EFNARC, Specification and Guidelines for Self-Compacting Concrete, Rep. from EFNARC. (2002).
51. ASTM C642-13, Standard test method for density, absorption, and voids in hardened concrete, ASTM International, ASTM Int. (2013).
52. ASTM C348, Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars, Annu. B. ASTM Stand. (1998).
53. ASTM C349, Standard test method for compressive strength of hydraulic-cement mortars (Using portions of prisms broken in flexure), ASTM Int. (2002).
54. ASTM, ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading), ASTM Stand. (1997). Doi:z10.1520/C1018-97.
55. ASTM C 1585-04, Standard test method for measurement of rate of absorption of water by hydraulic-cement concretes, ASTM Int. (2004).
56. ASTM C944 / C944M - 19, Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method, (n.d.). https://www.astm.org/Standards/C944 (accessed 22 July 2020).
57. Astm C666/C666M, Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, ASTM Int. West Conshohocken, PA. (2003). doi:10.1520/C0666.
58. RILEM, Measurement of hardened concrete carbonation depth: Rilem Recomendation CPC-18, Mater. Struct. 02 (1984) 435–440.10.1007/BF02473984 ↗
59. H. Sevik, M. Cetin, N. Belkayali, Effects of forests on amounts of CO2: Case study of Kastamonu and Ilgaz mountain national parks, Polish J. Environ. Stud. 24 (2015) 253–256. doi:10.15244/pjoes/28691.10.15244/pjoes/28691 ↗
60. Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete10.1016/j.matdes.2011.02.055 ↗
61. Flexural toughness and evaluation method of steel fiber reinforced self-compacting lightweight aggregate concrete10.1016/j.conbuildmat.2021.122297 ↗
62. Using aggregate flowability testing to predict lightweight self-consolidating concrete plastic properties10.1016/j.cemconcomp.2015.05.003 ↗
63. Application of steel fiber reinforced lightweight aggregate concrete in underground mining10.1134/S1062739147050091 ↗
64. Reuse of fly ash and bottom ash in mortars with improved thermal conductivity performance for buildings10.1016/j.heliyon.2018.e00934 ↗
65. The effect of fly ash content and types of aggregates on the properties of pre-fabricated concrete interlocking blocks (PCIBs)10.1016/j.conbuildmat.2011.12.020 ↗
66. Mechanical, durability and economic performance of concrete incorporating fly ash and recycled aggregates10.1007/s42452-020-1960-8 ↗
67. Effect of different types of fibers on the microstructure and the mechanical behavior of Ultra-High Performance Fiber-Reinforced Concretes10.1016/j.compositesb.2015.09.059 ↗
68. Performance of an alkali-activated slag concrete reinforced with steel fibers10.1016/j.conbuildmat.2007.10.027 ↗
69. Performance characteristics of micro fiber-reinforced geopolymer mortars for repair10.1016/j.conbuildmat.2019.04.210 ↗
70. Impact failure mechanism and mechanical characteristics of steel fiber reinforced self-compacting cementitious composites containing silica fume10.1016/j.jestch.2020.12.016 ↗
71. A comparison of the effects of pozzolanic binders on the hardened-state properties of high-strength cementitious composites reinforced with waste tire fibers10.1016/j.compositesb.2018.10.100 ↗
72. N. Banthia, A. Bhargava, Permeability of stressed concrete and role of fiber reinforcement, ACI Mater. J. 104 (2007) 70–76. doi:10.14359/18497.10.14359/18497 ↗
73. Exploring mechanical and durability properties of ultra-high performance concrete incorporating various steel fiber lengths and dosages10.1016/j.conbuildmat.2014.11.017 ↗
74. Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice10.1016/j.conbuildmat.2010.11.058 ↗
75. Effect of steel fibers on the mechanical properties of natural lightweight aggregate concrete10.1016/j.matlet.2005.05.071 ↗
76. P. Balaguru, M.G. Dipsia, Properties of fiber reinforced high-strength semilightweight concrete, ACI Mater. J. 90 (1993) 399–405. doi:10.14359/3865.10.14359/3865 ↗
77. Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete10.1016/S0958-9465(97)00023-1 ↗
78. Contribution of hybrid fibers on the properties of the high-strength lightweight concrete having good workability10.1016/j.cemconres.2004.07.035 ↗
79. Effect of pumice and fly ash incorporation on high temperature resistance of cement based mortars10.1016/j.cemconres.2007.02.005 ↗
80. Workability retention and compressive strength of self-compacting concrete incorporating pumice powder and silica fume10.1016/j.conbuildmat.2016.12.090 ↗
81. Behaviour of self compacting concrete using Portland pozzolana cement with different levels of fly ash10.1016/j.matdes.2012.11.015 ↗
82. Compressive strength and chloride resistance of self-compacting concrete containing high level fly ash and silica fume10.1016/j.matdes.2014.07.042 ↗
83. Underwater abrasion of steel fiber-reinforced self-compacting concrete
84. Effect on thermal properties of concrete containing micro steel fiber (CMSF)10.1088/1757-899X/1144/1/012020 ↗
85. Fiber-reinforced concrete containing ultra high-strength micro steel fibers under active confinement10.1016/j.conbuildmat.2018.07.042 ↗
86. Behavior of steel fiber-reinforced high-strength concrete-filled FRP tube columns under axial compression10.1016/j.engstruct.2015.02.020 ↗
87. Experimental study of high-strength steel fiber lightweight aggregate concrete on mechanical properties and toughness index10.1155/2020/5915034 ↗
88. Mechanical properties of lightweight aggregate moderate strength concrete reinforcement with hybrid fibers10.1088/1757-899X/584/1/012048 ↗
89. Mechanical strength development of mortars containing volcanic scoria-based binders with different fineness10.1016/j.jestch.2015.12.006 ↗
90. Comparative study on flexural properties of ultra-high performance concrete with supplementary cementitious materials under different curing regimes10.1016/j.conbuildmat.2017.01.052 ↗
91. Study on mixture design method and mechanical properties of steel fiber reinforced self-compacting lightweight aggregate concrete10.1016/j.conbuildmat.2020.121019 ↗
92. Strain hardening ultra-high performance fiber reinforced cementitious composites: effect of fiber type and concentration10.1016/j.compositesb.2016.08.004 ↗
93. Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete10.1016/j.conbuildmat.2015.11.028 ↗
94. Effects of fiber type, volume fraction and aspect ratio on the flexural and acoustic emission behaviors of steel fiber reinforced concrete10.1016/j.conbuildmat.2018.06.065 ↗
95. Study on mechanical properties of steel fiber reinforced autoclaved lightweight shell-aggregate concrete10.1016/j.matdes.2013.05.086 ↗
96. Strength and flexural behavior of steel fiber and silica fume incorporated self-compacting concrete10.1016/j.jmrt.2021.03.066 ↗
97. Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretes10.1016/j.conbuildmat.2007.04.017 ↗
98. S. Abbas, A.M. Soliman, M.L. Nehdi, Chloride ion penetration in reinforced concrete and steel fiber-Reinforced concrete precast tunnel lining segments, ACI Mater. J. 111 (2014) 613–622. doi:10.14359/51686991.10.14359/51686991 ↗
99. Performance of macrosynthetic and steel fiber-reinforced concretes emphasizing mineral admixture addition10.1061/(ASCE)MT.1943-5533.0002292 ↗
100. The effects of macro synthetic fiber reinforcement use on physical and mechanical properties of concrete10.1016/j.compositesb.2014.01.043 ↗