Pavement anti-icing coating based on a functional composite of NaCl microcapsules
Source abstract
Abstract
Since NaCl can effectively inhibit ice adhesion onto pavement surface, this work prepared a pavement anti-icing coating (PAC) containing NaCl microcapsules, epoxy resin, and emery. The scanning electron microscopy–energy-dispersive spectrometry (SEM–EDS), X-ray diffraction (XRD), attenuated total reflection–Fourier transform infrared (ATR–FTIR), and thermogravimetric analysis (TGA) confirmed the successful preparation of the NaCl microcapsules. The continuous soaking and dissolution test and the skid resistance test were used to determine the optimal mass gain rate of the NaCl microcapsules and the optimal microcapsule and emery content of the coating to obtain a coating with long-lasting anti-icing and high skid resistance. Then, the skid resistance, the abrasion, and the anti-icing properties of the coating were analyzed. The optimal application amount of the coating was obtained, and the durability and anti-icing performance of the coating was examined. The results show that the coating has good abrasion resistance, and the release law of NaCl remains unchanged after the coating is worn. The coating reduces the adhesion strength of ice by 85.6% and 45.3% at a temperature of –3 and –13 °C respectively. The work provides an alternative to the existing active anti-icing of pavements.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Smart Materials for Construction · Icing and De-icing Technologies · Aerodynamics and Fluid Dynamics Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Review and ranking of crash risk factors related to the road infrastructure10.1016/j.aap.2019.01.002 ↗
2. Phase change materials for pavement applications: a review10.1016/j.conbuildmat.2020.118553 ↗
3. Experimental feasibility study of a new attached hydronic loop design for geothermal heating of bridge decks10.1016/j.applthermaleng.2019.114507 ↗
4. Deicing efficiency analysis and economic-environment assessment of a novel induction heating asphalt pavement10.1016/j.jclepro.2020.123123 ↗
5. Coupling a hydronic heating pavement to a horizontal ground heat exchanger for harvesting solar energy and heating road surfaces10.1016/j.renene.2019.08.107 ↗
6. Combination design and performance evaluation of conductive bonding layer for asphalt pavement active deicing10.1016/j.conbuildmat.2020.121037 ↗
7. Smart bituminous material combining anti-icing and self-healing functions using electrothermal graphene microcapsules containing oily rejuvenator10.1016/j.conbuildmat.2019.07.098 ↗
8. Solar pavement: a new emerging technology10.1016/j.solener.2017.04.016 ↗
9. A review on hydronic asphalt pavement for energy harvesting and snow melting10.1016/j.rser.2015.04.029 ↗
10. hydronic pavement heating for sustainable ice-free roads10.1016/j.trpro.2016.05.336 ↗
11. Development of automated electrical heat grid for pavement snowmelt10.1016/j.tsep.2019.01.004 ↗
12. Wet pavement anti-icing — a physical mechanism10.1016/j.coldregions.2013.09.002 ↗
13. Migration characteristic and model of chloride ions for NaCl-based salt storage asphalt mixtures
14. Y. Zhang, X. Shi, A new sustainable additive for anti-icing pavement, (2019).
15. A study on evaluation and application of snowmelt performance of anti-icing asphalt pavement10.3390/app7060583 ↗
16. Laboratory investigation of andesite and limestone asphalt mixtures containing sodium chloride-based anti-icing filler10.1016/j.conbuildmat.2015.08.126 ↗
17. Laboratory evaluation of long-term anti-icing performance and moisture susceptibility of chloride-based asphalt mixture10.1016/j.ijprt.2016.04.001 ↗
18. Preparation and research on performance of ice-snow melting coating
19. Relationship of amino acid composition and molecular weight of antifreeze glycopeptides to non-colligative freezing point depression10.1016/0304-4165(82)90186-6 ↗
20. Relationship between freezing point depression and solute composition of fruit juice systems10.1111/j.1365-2621.1990.tb06815.x ↗
21. L. Fay, K. Volkening, C. Gallaway, X. Shi, Performance and impacts of current deicing and anti-icing products: user perspective versus experimental data, in: 87th Annual Meeting of the Transportation Research Board, Washington, DC, 2008, pp. 1–22.
22. Research of snow melting materials performance efficiency for road winter maintenance10.3846/16484142.2016.1211551 ↗
23. Influence of NaCl aqueous solution on compacted snow: field investigation10.1061/(ASCE)CR.1943-5495.0000195 ↗
24. Field investigation on the effectiveness of prewetting strategy for snow and ice control of transportation facilities10.1061/(ASCE)CR.1943-5495.0000101 ↗
25. Effectiveness of sodium chloride-based anti-icing filler in asphalt mixtures10.1016/j.conbuildmat.2011.12.036 ↗
26. ASTM D5827-09, Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography, ASTM International, West Conshohocken, PA, 2015.
27. M. Yu, G. Wu, Z. You, L. Kong, J. Gao, Measurement and Modeling of Skid Resistance of Asphalt Pavement: A Review, in: 2020 Annual Meeting of Transportation Research Board, 2020.10.1016/j.conbuildmat.2020.119878 ↗
28. ASTM E303-93, Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester, ASTM International, West Conshohocken, PA, 2018.
29. ASTM E965-96, Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique, ASTM International, West Conshohocken, PA, 2006.
30. ISSA TB No. 100. Laboratory Test Method for Wet Track Abrasion of Slurry Surfacing Systems, International Slurry Surfacing Association, Glen Ellyn, IL, 2017.
31. Some observations on the dependence of strain on stress for ice10.1139/p58-131 ↗
32. Constant strain-and stress-rate compressive strength of columnar-grained ice10.1007/BF00540376 ↗
33. Comparative strengths of fresh water ice10.1016/0165-232X(82)90041-6 ↗
34. ASTM D445-21, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity), ASTM International, West Conshohocken, PA, 2021.
35. Chinese Standard · 2004
36. Release kinetic studies of aspirin microcapsules from ethyl cellulose, cellulose acetate phthalate and their mixtures by emulsion solvent evaporation method10.3797/scipharm.0908-09 ↗
37. A simple equation for the description of solute release. III. Coupling of diffusion and relaxation10.1016/0378-5173(89)90306-2 ↗
38. Laboratory study on the adhesive properties of ice to the asphalt pavement of highway10.1016/j.coldregions.2014.04.002 ↗
39. Anti-freezing asphalt concrete: ice-adhesion performance10.1007/s10853-017-1866-z ↗
40. A model of the “liquid-like” layer between ice and a substrate with applications to wire regelation and particle migration10.1016/0021-9797(79)90277-7 ↗
41. Liquid-like (transition) layer on ice10.1016/0021-9797(67)90022-7 ↗
42. Liquid-like layers on ice in the environment: bridging the quasi-liquid and brine layer paradigms
43. Premelting at ice-solid interfaces studied via velocity-dependent indentation with force microscope tips10.1103/PhysRevB.63.134102 ↗
44. NMR investigation of the quasi-brine layer in ice/brine mixtures10.1021/jp020449+ ↗
45. Structure and temperature dependence of the flexural properties of laboratory freshwater ice sheets10.1016/0165-232X(89)90026-8 ↗
46. Flexural strength of ice on temperate lakes10.3189/S002214300021561X ↗