Solving the perpetual problem of imperative use heat curing for fly ash geopolymer cement by using sugar beet waste
Source abstract
Abstract
Abstract This study aims to solve the perpetual problem of imperative use heat curing for fly ash (FA) geopolymer cement to obtain reasonable strength, especially at the early ages by using calcinated carbonation lime residue (CCR). The carbonation lime residue is a waste resulting from the sugar beet industry. For this purpose, FA was partially replaced with CCR at ratios fluctuated from 2.5% to 10%, by weight, with a step of 2.5%. FA geopolymer specimens with/without CCR were cured at room temperature. To investigate the effect of CCR on FA geopolymer cement, classical tests of flowability, setting time, compressive strength at various ages, water absorption and total porosity were explored. The results were analyzed by using advanced devices. The results showed that CCR is similar to CaO. The inclusion of CCR decreased setting time, flowability, water absorption and total porosity, whilst the compressive strength, especially at an early age, was enhanced. The optimum ratio of CCR was 7.5%, which provided the highest strength, lowest water absorption, lowest total porosity and acceptable setting time. Including a suitable ratio of CCR can accelerate the polymerization, form C-S-H gel, fill the pores and produce denser microstructure. The inclusion of 10% CCR showed too short setting time which did not provide enough time for handling, casting, compacting and finishing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Survey · 2020
2. Eco-efficient cements: Potential economically viable solutions for a low-CO2 cement-based materials industry10.1016/j.cemconres.2018.03.015 ↗
3. Assessing the environmental sustainability of an emerging energy technology: solar thermal calcination for cement production10.1016/j.scitotenv.2020.140510 ↗
4. Simulation of the Sour-Compression Unit (SCU) process for CO2 purification applied to flue gases coming from oxy-combustion cement industries10.1016/j.compchemeng.2018.11.010 ↗
5. Stern · 2006
6. A comprehensive overview about the influence of different admixtures and additives on the properties of alkali-activated fly ash10.1016/j.matdes.2013.07.074 ↗
7. Energy audit for pyro-processing unit of a new generation cement plant and feasibility study for recovering waste heat: a case study10.1016/j.energy.2019.02.102 ↗
8. Metakaolin as cementitious material: History, scours, production and composition–A comprehensive overview10.1016/j.conbuildmat.2012.12.001 ↗
9. A brief on high-volume Class F fly ash as cement replacement – a guide for Civil Engineer10.1016/j.ijsbe.2015.10.002 ↗
10. An overview on rheology, mechanical properties and durability of high-volume slag used as a cement replacement in paste, mortar and concrete10.1016/j.conbuildmat.2018.07.150 ↗
11. High volume Portland cement replacement: a review10.1016/j.conbuildmat.2020.120445 ↗
12. Alkali-activated metakaolin: a short guide for civil Engineer – an overview10.1016/j.conbuildmat.2012.12.030 ↗
13. A comprehensive overview about the influence of different additives on the properties of alkali-activated slag – a guide for Civil Engineer10.1016/j.conbuildmat.2013.04.011 ↗
14. Eco-friendly geopolymer prepared from solid wastes: a critical review10.1016/j.chemosphere.2020.128900 ↗
15. Effect of microwave heating on interlayer bonding and buildability of geopolymer 3D concrete printing10.1016/j.conbuildmat.2020.120786 ↗
16. Aspects of the deformational behaviour of alkali activated fly ash concrete at elevated temperatures10.1016/j.cemconres.2014.01.026 ↗
17. NaOH-activated ground fly ash geopolymer cured at ambient temperature10.1016/j.fuel.2011.01.018 ↗
18. Deterioration of ambient-cured and heat-cured fly ash geopolymer concrete by high temperature exposure and prediction of its residual compressive strength10.1016/j.conbuildmat.2020.120924 ↗
19. The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cements10.1016/S0008-8846(01)00724-4 ↗
20. Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes10.1016/j.jhazmat.2008.12.121 ↗
21. Investigation on properties of geopolymer mortar using preheated materials and thermogenetic admixtures10.1016/j.conbuildmat.2016.10.110 ↗
22. Influence of slag as additive on compressive strength of fly ash-based geopolymer10.1061/(ASCE)0899-1561(2007)19:6(470) ↗
23. Final setting time and compressive strength of fly ash and GGBS-based geopolymer paste and mortar10.1007/s13369-015-1757-z ↗
24. Correlation of microstructural and mechanical properties of geopolymers produced from fly ash and slag at room temperature10.1016/j.conbuildmat.2018.10.037 ↗
25. Setting time and 7-day strength of geopolymer mortar with various binders10.1016/j.conbuildmat.2018.08.025 ↗
26. Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators10.1016/j.jclepro.2019.03.290 ↗
27. Thermal and compressive behaviors of fly ash and metakaolin-based geopolymer10.1016/j.jobe.2020.101307 ↗
28. Siliceous fly ash and blast furnace slag based geopolymer concrete under ambient temperature curing condition10.1002/suco.201900201 ↗
29. Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive10.1016/j.matdes.2013.07.018 ↗
30. Use of OPC to improve setting and early strength properties of low calcium fly ash geopolymer concrete cured at room temperature10.1016/j.cemconcomp.2014.08.008 ↗
31. High calcium fly ash geopolymer mortar containing Portland cement for use as repair material10.1016/j.conbuildmat.2015.08.139 ↗
32. Internal heat liberation and strength development of self-cured geopolymers in ambient curing conditions10.1016/j.conbuildmat.2016.03.197 ↗
33. Effect of calcium-rich compounds on setting time and strength development of alkali-activated fly ash cured at ambient temperature
34. Sugarcane bagasse—the future composite material: a literature review10.1016/j.resconrec.2013.03.002 ↗
35. A circular framework for the valorisation of sugar industry wastes: review on the industrial symbiosis between sugar, construction and energy industries10.1016/j.jclepro.2018.08.252 ↗
36. The particle size of carbonation mud, and possibilities for influencing it10.1016/j.jfoodeng.2007.05.023 ↗
37. Sugar beet lime sludge composts as organic fertilizers
38. Evaluation of sugar mill lime waste in biobased epoxy composites10.1002/pc.24019 ↗
39. Asadi · 2006
40. A review on beet sugar industry with a focus on implementation of waste-to-energy strategy for power supply10.1016/j.rser.2018.12.056 ↗
41. An initial study of using sugar-beet waste as a cementitious material10.1016/j.conbuildmat.2020.118843 ↗
42. Valorization of sugar beet waste as an additive for fly ash geopolymer cement cured at room temperature10.1016/j.jobe.2021.102989 ↗
43. The utilization of beet molasses as a retarding and water-reducing admixture for concrete10.1016/j.cemconres.2004.04.036 ↗
44. Utilization of beet molasses as a grinding aid in blended cements10.1016/j.conbuildmat.2011.04.041 ↗
45. H. Yildirim, B. Altun, Usage of molasses in concrete as a water reducing and retarding admixtur, (2012).
46. Durability of recycled aggregate concrete modified with sugarcane molasses10.1016/j.conbuildmat.2019.116913 ↗
47. Utilization and performance evaluation of molasses as a retarder and plasticizer for calcium sulfoaluminate cement-based mortar10.1016/j.conbuildmat.2020.118201 ↗
48. Effect of ceramic waste powder on alkali-activated slag pastes cured in hot weather after exposure to elevated temperature10.1016/j.cemconcomp.2020.103617 ↗
49. Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperature10.1016/j.cemconres.2011.10.007 ↗
50. Properties and corrosion behaviour of applicable binary and ternary geopolymer blends10.1080/19397038.2021.1913532 ↗
51. Valorization of fly ash as an additive for electric arc furnace slag geopolymer cement10.1016/j.conbuildmat.2021.123570 ↗
52. Effect of alkali reactions on the rheology of one-part 3D printable geopolymer concrete10.1016/j.cemconcomp.2020.103899 ↗
53. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature10.1016/j.matdes.2014.05.001 ↗
54. Tie-confinement aspects of fly ash-GGBS based geopolymer concrete short columns10.1016/j.conbuildmat.2017.06.065 ↗
55. Preparation and tests for workability, compressive and bond strength of ultra-fine slag based geopolymer as concrete repairing agent10.1016/j.conbuildmat.2017.07.187 ↗
56. Workability and mechanical properties of alkali-activated fly ash-slag concrete cured at ambient temperature10.1016/j.conbuildmat.2018.04.008 ↗
57. The use of high calcium wood ash in the preparation of ground granulated blast furnace slag and pulverized fly ash geopolymers: a complete microstructural and mechanical characterization10.1016/j.jclepro.2017.04.026 ↗
58. Optimum mix design of geopolymer pastes and concretes cured in ambient condition based on compressive strength, setting time and workability10.1016/j.jobe.2019.02.006 ↗
59. Improvement of early strength of fly ash-slag based one-part alkali activated mortar10.1016/j.conbuildmat.2020.118533 ↗
60. Properties of fresh and hardened fly ash/slag based geopolymer concrete: a review10.1016/j.jclepro.2020.122389 ↗
61. Hardening evolution of geopolymers from setting to equilibrium: a review10.1016/j.cemconcomp.2020.103729 ↗
62. Effect of calcium oxide on mechanical properties and microstructure of alkali-activated slag composites at sub-zero temperature10.1016/j.jobe.2020.101561 ↗
63. A sustainable calcined water treatment sludge and rice husk ash geopolymer10.1016/j.jclepro.2016.01.060 ↗
64. Effects of Portland cement on activation mechanism of class F fly ash geopolymer cured under ambient conditions10.1016/j.conbuildmat.2018.09.065 ↗
65. Influence of supplementary cementitious materials on rheological properties of 3D printed fly ash based geopolymer10.1016/j.cemconcomp.2020.103820 ↗
66. Physical and mechanical properties and micro characteristics of fly ash-based geopolymer paste incorporated with waste Granulated Blast Furnace Slag (GBFS) and functionalized Multi-Walled Carbon Nanotubes (MWCNTs)10.1016/j.jhazmat.2020.123339 ↗
67. Enhancement of the Mechanical Properties of Kaolin Geopolymer Using Sodium Hydroxide and Calcium Oxide
68. Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag10.1016/j.cemconres.2013.09.011 ↗
69. Strength enhancement and pore-size refinement in clinker-free CaO-activated GGBFS systems through substitution with gypsum10.1016/j.cemconcomp.2016.02.008 ↗
70. Influence of slag characteristics on strength development and reaction products in a CaO-activated slag system10.1016/j.cemconcomp.2016.06.005 ↗
71. Mechanical and hydration properties of ground granulated blastfurnace slag pastes activated with MgO–CaO mixtures10.1016/j.conbuildmat.2014.07.032 ↗
72. Production of price-competitive bricks using a high volume of stone powder sludge waste and blast furnace slag through cementless CaO activation10.1016/j.conbuildmat.2016.06.088 ↗
73. Influence of the combination of calcium oxide and sodium carbonate on the hydration reactivity of alkali-activated slag binders10.1016/j.jclepro.2017.10.077 ↗
74. Compatibility studies between NASH and CASH gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O10.1016/j.cemconres.2011.05.006 ↗
75. Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products10.1016/j.jhazmat.2006.02.044 ↗
76. The effects of inorganic salt contamination on the strength and durability of geopolymers10.1016/S0927-7757(02)00239-X ↗
77. Effect of limestone powder on mechanical strength, durability and drying shrinkage of alkali-activated slag pastes10.1007/s41062-021-00496-y ↗
78. Properties of low-calcium fly ash based geopolymer concrete incorporating OPC as partial replacement of fly ash10.1016/j.conbuildmat.2017.06.067 ↗
79. An investigation on alkali-activated fly ash pastes modified with quartz powder subjected to elevated temperatures10.1016/j.conbuildmat.2016.06.068 ↗
80. Microstructure and properties of fly ash-based geopolymeric material with 5A zeolite as a filler10.1016/j.conbuildmat.2012.01.014 ↗