journal article·2021-12Open access

Compressive zone depth of thermally tempered glass

Jens H. Nielsen, Kerstin Thiele, Jens Schneider, Martin J. Meyland

Abstract

In most literature, the residual stress distribution is assumed to be a symmetrically 2nd order polynomial with compressive stresses near the surface, balanced by tensile stresses in the centre. This assumption leads directly to the assertion that the thickness of the compressive layer is 21.1 % of the total thickness. The present paper experimentally investigates the accuracy of this well-established rule for thermally tempered glass and develops a simple equation for asymmetric stress distributions. The experimental investigation is based on more than 6000 measurements of commercially tempered (and heat-strengthened) soda lime silica glass and provides statistics for the compressive zone depth. The dependency of the thickness, residual stress state, and the effect of asymmetric stress distributions is investigated. Due to the scattering in the experimental results, an FE-model has been applied to clarify the effect from the different parameters.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Structural Analysis of Composite Materials · Glass properties and applications · Material Science and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Hooke · 1664 · 1
2. The annealing of glass10.1016/S0016-0032(20)90066-2 ↗
3. The phenomenon of the hardening of glass
4. On the generation of residual stresses in thermoviscoelastic bodies10.1115/1.3627329 ↗
5. A model of structural relaxation in glass10.1111/j.1151-2916.1971.tb12186.x ↗
6. Numerical simulation of soda-lime silicate glass tempering
7. Stress distribution in thermally tempered glass panes near the edges, corners and holes - part 2 - distribution of thermal stresses
8. Finite element computation of residual stresses near holes in tempered glass plates
9. Finite element implementation of a glass tempering model in three dimensions10.1016/j.compstruc.2010.05.004 ↗
10. Aronen · 2012
11. Stress relaxation in tempered glass caused by heat soak testing10.1016/j.engstruct.2016.04.024 ↗
12. Investigating the strength effects of drilling in tempered glass a first step towards a novel dowel joint10.1007/s40940-019-00095-5 ↗
13. Residual stress distribution in tempered glass with reground edges10.1007/s40940-018-0084-7 ↗
14. S.T. Gulati, Frangibility of tempered soda-lime glass sheet, in: Glass Processing Days, Tampere, Finland, 1997, pp. 72–76.
15. P.D. Warren, Fragmentation of thermally strengthened glass, in: J.R. Varner and G.D. Quinn, Fractography of Glasses and Ceramics IV, Vol. 122, Alfred, NY, pp. 389–402.
16. Thermally toughened safety glass: Correlation between flexural strength, fragmentation and surface compressive stress
17. Energetic approach of elastic strain energy of thermally tempered glass
18. Remaining stress-state and strain-energy in tempered glass fragments10.1007/s40940-016-0036-z ↗
19. Relationship between strain energy and fracture pattern morphology of thermally tempered glass for the prediction of the 2D macro-scale fragmentation of glass10.1007/s40940-018-00091-1 ↗
20. Effect of glass temperature before cooling and cooling rate on residual stresses in tempering10.1007/s40940-017-0053-6 ↗
21. Influence of cooling jets on stress pattern and anisotropy in tempered glass
22. A compact scattered light polariscope for residual stress measurement in glass plates
23. Photoelasticity of glass
24. . GlasStress, Scattered Light Polariscope SCALP (instruction manual v5.8.2), Talinn.
25. Characterization of the residual stress state in commercially fully toughened glass10.1061/(ASCE)0899-1561(2010)22:2(179) ↗
26. Simulation of residual stresses at holes in tempered glass: a parametric study10.1617/s11527-009-9558-z ↗
27. EN. 572-2 · 2012
28. Schneider · 2001 · 243
29. Tempered glass: -bolted connections and related problems