Ni0.6Zn0.4Fe2O4/Ti3C2Tx nanocomposite modified epoxy resin coating for improved microwave absorption and impermeability on cement mortar
Source abstract
Abstract
Abstract With the rapid development of wireless technology, electromagnetic interference and pollution have been a serious harmful problem to human health. Therefore, it is greatly significant to design and explore efficient electromagnetic wave (EMW) absorbing coatings on the surface of devices, mortar or other building materials. In this paper, a series of novel Ni0.6Zn0.4Fe2O4/Ti3C2Tx nanocomposite modified epoxy resins with different additive content were successfully prepared to serve as absorbing and anticorrosive coating on cement mortar. The effect of the content of Ni0.6Zn0.4Fe2O4/Ti3C2Tx nanocomposite in epoxy resin as coatings of cement mortar on mechanical properties, interfacial bonding ability, corrosion performances and reflectivity performances was detailly investigated. Apparently, when 3% Ni0.6Zn0.4Fe2O4/Ti3C2Tx nanocomposite is added into epoxy resin, the cement mortar with modified coatings exhibits the most excellent EMW absorption properties, whose the minimum reflectivity is −34.39 dB, the absorption bandwidth with reflectivity lower than − 10 dB is about 8.96 GHz. Besides, both capillary sorptivity and chloride penetration tests demonstrated that the impermeability of water and chloride ions of cement mortar coated by modified epoxy coatings was obviously improved with the increase of Ni0.6Zn0.4Fe2O4/Ti3C2Tx nanocomposite compared to cement mortar without coatings and with pure epoxy resin coating. In particular, the optimized modified epoxy resin with 3% dosage of Ni0.6Zn0.4Fe2O4/Ti3C2Tx nanocomposite also displays the lowest capillary sorptivity and chloride permeability. Our findings proved that the use of Ni0.6Zn0.4Fe2O4/Ti3C2Tx nanocomposite modified epoxy resin as coatings of cement mortar provides a viable source for solving electromagnetic pollution and impermeability problems in military and civilian applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Magnetic Properties and Synthesis of Ferrites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Novel solvothermal preparation and enhanced microwave absorption properties of Ti3C2Tx MXene modified by in situ coated Fe3O4 nanoparticles10.1016/j.apsusc.2019.03.264 ↗
2. Promising Ti3C2Tx MXene/Ni Chain Hybrid with Excellent Electromagnetic Wave Absorption and Shielding Capacity10.1021/acsami.9b07294 ↗
3. Fabrication on the annealed Ti3C2Tx MXene/Epoxy nanocomposites for electromagnetic interference shielding application10.1016/j.compositesb.2019.04.050 ↗
4. Hydrophobic, Flexible, and Lightweight MXene Foams for High-Performance Electromagnetic-Interference Shielding10.1002/adma.201702367 ↗
5. Recent progress in electromagnetic wave absorption building materials10.1016/j.jobe.2019.100963 ↗
6. CoNi@SiO2@TiO2 and CoNi@Air@TiO2 Microspheres with Strong Wideband Microwave Absorption10.1002/adma.201503149 ↗
7. Interfacial adhesion mechanism between organic polymer coating and hydrating cement paste10.1016/j.cemconcomp.2020.103856 ↗
8. Hydration, carbonation, strength development and corrosion resistance of reactive MgO cement-based composites10.1016/j.cemconres.2019.105941 ↗
9. Optimization of electromagnetic wave absorption bandwidth of cement-based composites with doped expanded perlite10.1016/j.conbuildmat.2020.119863 ↗
10. Investigation on electromagnetic and microwave absorption properties of copper slag-filled cement mortar10.1016/j.cemconcomp.2016.10.003 ↗
11. Electromagnetic wave absorbing characteristics of carbon black cement-based composites10.1016/j.cemconcomp.2010.03.009 ↗
12. Electromagnetic wave absorbing properties of multi-walled carbon nanotube/cement composites10.1016/j.conbuildmat.2013.04.006 ↗
13. Electromagnetic wave absorbing cement-based composite using Nano-Fe3O4 magnetic fluid as absorber10.1016/j.cemconcomp.2018.05.004 ↗
14. Modelling capillary effects on the reactive transport of chloride ions in cementitious materials10.1016/j.cemconres.2020.106033 ↗
15. Fabrication and thermal analysis of epoxy resin-carbon fiber fabric composite plate-coil heat exchangers10.1016/j.applthermaleng.2017.08.124 ↗
16. Performance of a carbon-fiber/epoxy composite for the underwater repair of pressure equipment10.1016/j.compstruct.2012.12.015 ↗
17. Microcontainer-based waterborne epoxy coatings for AA2024-T3: Effect of nature and number of polyelectrolyte multilayers on active protection performance10.1016/j.matchemphys.2019.122404 ↗
18. Long-term salt-water durability of GNPs reinforced basalt-epoxy multiscale composites for marine applications10.1016/j.triboint.2021.106910 ↗
19. Corrosion-inhibiting, self-healing, mechanical-resistant, chemically and UV stable PDMAS/TiO2 epoxy hybrid nanocomposite coating for steel petroleum tanker trucks
20. Hindering the decrease in wear resistance of UV-exposed epoxy powder coatings by adding nano-SiO2 through ball milling
21. Cycloaliphatic epoxy-based hybrid nanocomposites reinforced with POSS or nanosilica for improved environmental stability in low Earth orbit10.1016/j.compositesb.2017.11.010 ↗
22. Long-term effectiveness of carbonation resistance of concrete treated with nano-SiO2 modified polymer coatings10.1016/j.conbuildmat.2019.01.004 ↗
23. High-efficiency electromagnetic wave absorption of epoxy composites filled with ultralow content of reduced graphene/carbon nanotube oxides10.1016/j.compscitech.2020.108020 ↗
24. Investigation of properties of nano-silica modified epoxy resin films and composites using RFI technology10.1016/j.compositesb.2018.08.055 ↗
25. Enhanced mechanical and thermal performances of epoxy resin by oriented solvent-free graphene/carbon nanotube/Fe3O4 composite nanofluid10.1016/j.compscitech.2018.07.036 ↗
26. Tribological characterization of epoxy hybrid nanocomposite coatings reinforced with graphene oxide and titania
27. Investigation of the in-situ solvothermal reduction of multi-layered Graphene oxide in epoxy coating by acetonitrile on improving the hydrophobicity and corrosion resistance
28. Superhydrophobic organic and inorganic clay nanocomposites for epoxy steel coatings
29. Corrosion resistance of surface texturing epoxy resin coatings reinforced with fly ash cenospheres and multiwalled carbon nanotubes
30. Strength characteristics and prediction of epoxy resin pavement mixture10.1016/j.conbuildmat.2021.122682 ↗
31. The effects of harsh aging environments on the properties of neat and MWCNT reinforced epoxy resins10.1016/j.conbuildmat.2020.121929 ↗
32. GO-CNTs hybrids reinforced epoxy composites with porous structure as microwave absorbers10.1016/j.compscitech.2020.108450 ↗
33. Electromagnetic interference shielding and absorption properties of Ti3SiC2/nano Cu/epoxy resin coating10.1016/j.jallcom.2018.01.017 ↗
34. Effective improvement on microwave absorbing performance of epoxy resin-based composites with 3D MXene foam prepared by one-step impregnation method10.1016/j.compositesa.2021.106594 ↗
35. Durability evaluation of geopolymer and conventional concretes10.1016/j.conbuildmat.2017.01.056 ↗
36. A novel TiO2/Epoxy resin composited geopolymer with great durability in wetting-drying and phosphoric acid solution10.1016/j.jclepro.2019.04.203 ↗
37. Impermeability and interfacial bonding strength of TiO2-graphene modified epoxy resin coated OPC concrete
38. Electromagnetic wave absorption properties of helical carbon fibers and expanded glass beads filled cement-based composites10.1016/j.compositesa.2018.08.034 ↗
39. Electromagnetic wave absorption performance of magnesium phosphate cement functionalized by nano-Fe3O4 magnetic fluid and hollow glass microspheres10.1016/j.conbuildmat.2020.120771 ↗
40. Preparation of two-dimensional titanium carbide (Ti3C2Tx) and NiCo2O4 composites to achieve excellent microwave absorption properties10.1016/j.compositesb.2019.107577 ↗
41. Dual-loss Ti3C2Tx MXene/Ni0.6Zn0.4Fe2O4 heterogeneous nanocomposites for highly efficient electromagnetic wave absorption10.1016/j.jallcom.2021.161298 ↗
42. Structural and magnetic properties of Cr doped NiZn-ferrite nanoparticles prepared by surfactant assisted hydrothermal technique10.1016/j.ceramint.2015.01.079 ↗
43. Tunable electromagnetic and enhanced microwave absorption properties in CoFe2O4 decorated Ti3C2 MXene composites10.1016/j.apsusc.2019.144210 ↗
44. Guo · 2019
45. The investigating on mechanical properties of ultra-high strength and ultra-high ductility cementitious composites (UHS-UHDCC)
46. Targeting functionalised carbon nanotubes at the interphase of Textile Reinforced Mortar (TRM) composites10.1016/j.compositesa.2021.106330 ↗
47. Preparation of TiO2/epoxy resin composite and its effect on mechanical and bonding properties of OPC mortars10.1016/j.conbuildmat.2020.121960 ↗
48. Micro-mechanical model for ultra-high strength and ultra-high ductility cementitious composites (UHS-UHDCC)10.1016/j.conbuildmat.2020.120668 ↗
49. 3D Ti3C2Tx MXene/C hybrid foam/epoxy nanocomposites with superior electromagnetic interference shielding performances and robust mechanical properties10.1016/j.compositesa.2019.05.030 ↗
50. A robust, hydrophobic CeO2/NiCoCrAlY composite coating with excellent thermal stability and corrosion resistance prepared by air plasma spray10.1016/j.jallcom.2021.158623 ↗
51. The interpenetration polymer network in a cement paste–waterborne epoxy system10.1016/j.cemconres.2020.106236 ↗
52. Robust silicon dioxide @ epoxy resin micronanosheet superhydrophobic omnipotent protective coating for applications10.1016/j.colsurfa.2018.04.036 ↗
53. Diffusion of chloride ion in coral aggregate seawater concrete under marine environment10.1016/j.conbuildmat.2021.122821 ↗
54. Fabrication of composite coatings with core-shell nanofibers and their mechanical properties, anticorrosive performance, and mechanism in seawater
55. Chloride-induced corrosion mechanism and rate of enamel- and epoxy-coated deformed steel bars embedded in mortar10.1016/j.cemconres.2015.12.015 ↗
56. The electromagnetic characteristics of fly ash and absorbing properties of cement-based composites using fly ash as cement replacement10.1016/j.conbuildmat.2011.07.062 ↗
57. Design and preparation of double-layer structured cement-based composite with inspiring microwave absorbing property10.1016/j.conbuildmat.2020.120670 ↗
58. Synthesis of Ti3C2/Fe3O4/PANI hierarchical architecture composite as an efficient wide-band electromagnetic absorber10.1016/j.apsusc.2019.03.049 ↗