journal article·2021-11

Impact of various sands and fibres on the physical and mechanical properties of earth mortars for plasters and renders

Matthieu Pedergnana, Soofia Tahira Elias-Ozkan

Publisher page

Abstract

Abstract Earth plasters and renders tend to crack and crumble due to weathering. Their resilience can be improved by adding sand or fibre to the earth mixture. This paper presents an extensive literature review on earth mortar studies and the results of some experiments to strengthen the earth mortars with different sands and fibres. These experiments showed that regardless of the type of fibre or sand used, the impact on shrinkage was positive but negative on mechanical strength. Although 5% chaff improved flexural and compressive strength, increasing fibre content to > 10% reduced compressive strength, and to > 20% also reduced flexural strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Building materials and conservation · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (98)

Show source-provided references
1. Strategies to improve earth building durability
2. R. Anger, L. Fontaine, D. Gandreau, A. Bourgès, T. Joffroy, Earthen surfaces stabilization with biopolymers: traditional recipes and literature review, in: A. Vissac, L. Fontaine, R. Anger (Eds.), Terra 2012, 2012: p. 8.
3. German Institute for Normalization, Earth plasters – Terms and definitions, requirements, test method, Germany, 2013.
4. A. Reichel, A. Hochberg, C. Köpke, Plaster, Render, Paint and Coatings, Birkhäuser, 2004.10.11129/detail.9783034614764 ↗
5. Field-to-laboratory analysis of clay wall coatings as passive removal materials for ozone in buildings10.1111/ina.12345 ↗
6. Impacts of a clay plaster on indoor air quality assessed using chemical and sensory measurements10.1016/j.buildenv.2012.06.004 ↗
7. Indoor Air Quality Regulation Through the Usage of Eco-Efficient Plasters
8. The Relevance of Earthen Plasters for Eco Innovative, Cost-Efficient and Healthy Construction—Results from the EU-Funded Research Project [H]house
9. A. Thomson, D. Maskell, P. Walker, M. Lemke, A. Shea, M. Lawrence, Improving the hygrothermal properties of clay plasters, in: 15th Int. Conf. Non-Conventional Mater. Technol. (NOCMAT 2015), University of Manitoba, Winnipeg, 2015: p. 8.
10. A review on the buffering capacity of earth building materials10.1680/jcoma.15.00035 ↗
11. V. Cascione, D. Maskell, A. Shea, P. Walker, Full-Scale Simulation of Indoor Humidity and Moisture Buffering Properties of Clay, (2019) 395–406. doi:10.1007/978-981-13-5883-8_34.10.1007/978-981-13-5883-8_34 ↗
12. Appendix S : Strawbale Construction, 2015.
13. Plant aggregates and fibers in earth construction materials: A review10.1016/j.conbuildmat.2016.02.119 ↗
14. A procedure to assess the suitability of plaster to protect vernacular earthen architecture10.1016/j.culher.2012.04.005 ↗
15. An experimental study on earth plasters for earthen building protection: The effects of different admixtures and surface treatments10.1016/j.culher.2015.07.009 ↗
16. Earthen Plasters Based on Illitic Soils from Barrocal Region of Algarve: Contributions for Building Performance and Sustainability10.4028/www.scientific.net/KEM.678.64 ↗
17. Performance of ready-mixed clay plasters produced with different clay/sand ratios10.1016/j.clay.2015.08.005 ↗
18. Experimental Characterization of an Earth Eco-Efficient Plastering Mortar10.1061/(ASCE)MT.1943-5533.0001363 ↗
19. Earth concrete. Stabilization revisited10.1016/j.cemconres.2017.02.035 ↗
20. Strength and elasto-plastic properties of non-industrial building materials manufactured with clay as a natural binder10.1016/j.clay.2008.12.019 ↗
21. CEN, Methods of test for mortar for masonry, 1999.
22. Physical, mineralogical and mechanical characterization of ready-mixed clay plaster10.1016/j.buildenv.2014.05.012 ↗
23. T. Santos, P. Faria, Evaluating earthen mortars for rendering, in: T. Joffroy, H. Guillaud, C. (dir. . Sadozai (Eds.), Terra Lyon 2016, CRATerre Editions, 2018: pp. 1–7.
24. Geomaterials in green building practices: comparative characterization of commercially available clay-based plasters, Environ10.1007/s12665-013-2499-4 ↗
25. Adobe Blocks in the Center of Portugal: Main Characteristics10.1080/15583058.2019.1627442 ↗
26. Increasing the Strength of Soil for Adobe Construction10.1080/00038628.2000.9697547 ↗
27. Manually Produce Clay-Based Housing Materials in Rural Area
28. Strength Behavior of Mud Brick in Building Construction, Open
29. Compressive strength of fibre reinforced earth plasters for straw bale buildings
30. Development of a high clay content earth plaster10.1088/1757-899X/660/1/012068 ↗
31. J. Lima, D. Correia, P. Faria, Rebocos de terra: Influência da adição de gesso e da granulometria da areia, in: Argamassas 2016 – II Simpósio Argamassas e Soluções Térmicas Revest., Coimbra, Portugal, 2016.
32. Experimental analysis and modelling of the mechanical behaviour of earthen bricks10.1016/j.conbuildmat.2010.11.039 ↗
33. Compressive strength testing of earthen plasters for straw-bale wall application
34. Optimizing the mechanical strength of adobe bricks10.1346/CCMN.2009.0570410 ↗
35. Santos · 2014
36. Comparison of adobes from pre-history to-date10.1016/j.jasrep.2017.02.009 ↗
37. Use of by-products as additives in adobe bricks: Mechanical properties characterization10.1016/j.conbuildmat.2016.01.044 ↗
38. Experimental investigation on mud bricks reinforced with natural additives under compressive and tensile tests10.1016/j.conbuildmat.2017.03.065 ↗
39. Shrinkage of natural plaster materials for straw bale buildings affected by reinforcement fibers and drying
40. D. García, L. Milla, A. Navarro, M. Palumbo, A.M. Lacasta, Revestimientos con tierra y fibras vegetales: Metodología de estudio., in: Construcción Tierra. Patrim. y Vivienda X CIATTI 2013, 2013: pp. 225–237.
41. Performance of clay-straw plasters containing natural additives
42. Comparison of barley and lavender straws as bioaggregates in earth bricks10.1016/j.conbuildmat.2018.12.126 ↗
43. F. Jové-Sandoval, M.M. Barbero-Barrera, N. Flores, Assessment of the mechanical performance of three varieties of pine needles as natural reinforcement of adobe, 187 (2018) 205–213. doi:10.1016/j.conbuildmat.2018.07.187.10.1016/j.conbuildmat.2018.07.187 ↗
44. Effect of Plant Aggregates on Mechanical Properties of Earth Bricks10.1061/(ASCE)MT.1943-5533.0002096 ↗
45. Experimental study of fibre-reinforced interlocking mud bricks under compressive test10.1680/jcoma.18.00028 ↗
46. M.M. Salih, A.I. Osofero, M.S. Imbabi, Mechanical Properties of Fibre-reinforced mud bricks, in: CCE2018, Khartoum, Sudan, 2018.
47. J. Concha-Riedel, G. Araya-Letelier, F.C. Antico, U. Reidel, A. Glade, Influence of Jute Fibers to Improve Flexural Toughness, Impact Resistance and Drying Shrinkage Cracking in Adobe Mixes, (2019) 269–278. doi:10.1007/978-981-13-5883-8_24.10.1007/978-981-13-5883-8_24 ↗
48. Waste-based natural fiber reinforcement of adobe mixtures: Physical, mechanical, damage and durability performance assessment10.1016/j.jclepro.2020.122806 ↗
49. Influence of natural fiber dosage and length on adobe mixes damage- mechanical behavior10.1016/j.conbuildmat.2018.04.151 ↗
50. Experimental mechanical-damage assessment of earthen mixes reinforced with micro polypropylene fibers10.1016/j.conbuildmat.2018.11.261 ↗
51. Effectiveness of new natural fibers on damage-mechanical performance of mortar10.1016/j.conbuildmat.2017.07.072 ↗
52. Physical, thermal and mechanical properties of adobes stabilized with fonio (Digitaria exilis) straw10.1016/j.jobe.2019.02.005 ↗
53. M. Ouedraogo, K. Dao, Y. Millogo, M. Seynou, J. Aubert, M. Ouedraogo, K. Dao, Y. Millogo, M. Seynou, Influence des fibres de kenaf (Hibiscus altissima) sur les propriétés physiques et mécaniques des adobes, (2017) 48–63.
54. Use of seagrass fibres in adobe bricks10.1088/1755-1315/225/1/012051 ↗
55. J. Lima, P. Faria, Eco-efficient Earthen Plasters. The Influence of the Addition of Natural Fibers, in: R. Fangueiro (Ed.), 2nd Int. Conf. Nat. Fibers - From Nat. to Mark., Ponta Delgada, Portugal, 2015: pp. 1–10.
56. The influence of natural reinforcement fibers, gypsum and cement on compressive strength of earth bricks materials10.1016/j.conbuildmat.2015.12.031 ↗
57. Physico-mechanical and thermal gravimetric analysis of adobe masonry units reinforced with plantain pseudo-stem fibres for sustainable construction10.1016/j.conbuildmat.2020.121686 ↗
58. Mechanisms by which the inclusion of natural fibres enhance the properties of soil blocks for construction10.1177/0021998317693293 ↗
59. Behaviour of composite soil reinforced with natural fibres10.1016/S0958-9465(98)00033-X ↗
60. Effect of fibre aspect ratio on mechanical properties of soil building blocks10.1016/j.conbuildmat.2015.03.039 ↗
61. Architect Werner Schmidt’s Straw-Bale Construction10.4028/www.scientific.net/KEM.600.727 ↗
62. Experimental analysis of Pressed Adobe Blocks reinforced with Hibiscus cannabinus fibers10.1016/j.conbuildmat.2013.10.094 ↗
63. Green Plastering Mortars Based on Clay and Wheat Straw10.1016/j.protcy.2016.01.105 ↗
64. Effect on compressive and flexural strength of agave fiber reinforced adobes10.1080/15440478.2017.1349709 ↗
65. The influence of vegetable fiber additions on the physico- mechanical characteristics of the adobe bricks
66. Physical, mechanical and durability properties of soil building blocks reinforced with natural fibres10.1016/j.conbuildmat.2015.10.069 ↗
67. Performance characteristics of enhanced soil blocks: a quantitative review10.1080/09613218.2014.933293 ↗
68. Dynamic behaviour of adobe bricks in compression: The role of fibres and water content at various loading rates10.1016/j.conbuildmat.2019.117038 ↗
69. Clay Mortar Performance Improvement by Modifying the Physical Characteristics of Wheat Straw10.1016/j.protcy.2016.01.106 ↗
70. Performance of composite soil reinforced with barley straw10.1016/j.cemconcomp.2004.09.013 ↗
71. T. dos Santos, P. Faria, V. Silva, Caracterização de argamassa pré-doseada de terra, in: Argamassas 2014; Simp. Argamassas e Soluçoes Termicas Revest., Coimbra, Portugal, 2014: pp. 1–12. http://run.unl.pt/bitstream/10362/12506/1/CN33 - Santos et al_Arg terra DIN_Argamassas2014_ID4.pdf (accessed March 18, 2015).
72. P. Faria, T. dos Santos, V. Silva, Earth-based mortars for masonry plastering, in: 9th Int. Mason. Conf., Guimares, Portugal, 2014: pp. 1–12.
73. Experimental Investigation on Lightweight and Lime Stabilized Earth Composites10.4028/www.scientific.net/KEM.666.31 ↗
74. The effects of the fiber contents on the mechanic properties of the adobes10.1016/j.conbuildmat.2006.08.022 ↗
75. Economical stabilization of clay for earth buildings construction in rainy and flood prone areas10.1016/j.conbuildmat.2014.12.046 ↗
76. Incorporation of bamboo particles and “synthetic termite saliva” in adobes10.1016/j.conbuildmat.2015.06.009 ↗
77. Physical, mechanical and thermal behavior of adobe stabilized with glass fiber reinforced polymer waste10.1016/j.conbuildmat.2019.06.107 ↗
78. Development of bio-based earth products for healthy and sustainable buildings: characterization of microbiological, mechanical and hygrothermal properties10.1051/mattech/2015011 ↗
79. G.R.L. Tavares, R. De Janeiro, R. De Janeiro, R. De Janeiro, Effect of urecycled pet fibers inclusion on the shrinkage of adobe brick, (2019) 3–8.
80. Determining the Optimum Addition of Vegetable Materials in Adobe Bricks10.1016/j.protcy.2016.01.077 ↗
81. New Zealand Technical Committe, NZS 4298 (1998): Materials and workmanship for earth buildings, New Zealand, 1998.
82. F. Rojat, M. Olivier, A. Mesbah, B. Xiao, Mechanical Characterization of Natural Fibre-Reinforced Earth Plasters, in: S. Amziane (Ed.), ICBBM 2015 - First Int. Conf. Bio-Based Build. Mater. Clermont-Ferrand, Fr., RILEM, Clermont-Ferrand, France, 2015: pp. 64–71.
83. Minke · 2012
84. Houben · 2008
85. Röhlen · 2014
86. Characterization : Porosity of mortars
87. P.N. Quiroga, D.W. Fowler, The Effects of Aggregates Characteristics on the Performance of Portland Cement Concrete, 2004.
88. Comparaison de methodes d ’essais de mesures des caracteristiques mecaniques des mortiers de terre
89. Eco-efficient earth plasters: The effect of sand grading and additions on fresh and mechanical properties10.1016/j.jobe.2020.101591 ↗
90. I. Sevilla Avila, J.L. Serrano Canto, J.F. Rodriguez, F.J. Castilla Pascual, M. Carmona, D. Sanz Martinez, Estudio metodológico sobre aprovechamiento de materiales de cambio de fase para la elaboración de morteros de revestimiento de arcilla en paramentos interiores de edificación, in: Arquit. En Tierra. Patrim. Cult. XII CIATTI. Congr. Arquit. En Tierra En Cuenca Campos 2015, Valladoid, Spain, 2015: pp. 175–186.
91. Granular and colloidal approach of earthen building material
92. Plant-based natural fibre reinforced cement composites: A review10.1016/j.cemconcomp.2016.02.014 ↗
93. Effect of reinforcing wool fibres on fracture and energy absorption properties of an earthen material10.1016/j.conbuildmat.2011.08.008 ↗
94. S. Liuzzi, P. Stefanizzi, Soil Based Building Materials for Energy Efficiency, in: Mater. Technol. Green Constr., 2014: pp. 15–38. doi:10.4028/www.scientific.net/KEM.632.15.10.4028/www.scientific.net/KEM.632.15 ↗
95. Influence of straw content on the mechanical and thermal properties of bio-based earth composites
96. Henderson · 2013
97. Weismann · 2008
98. Caractérisation mécanique des enduits en terre crue fibrée, in