journal article·2021-12

Effect of polyethylene glycol on chloride binding in mortar

Lixiao Zhao, Pan Feng, Shaoxiong Ye, Xin Liu, Haochuan Wang

Publisher page

Abstract

Abstract As a widely used chemical admixture, polyethylene glycol (PEG) is often added to concrete as a self-curing or shrinkage-reducing agent. PEG with a low molecular mass can inhibit the corrosion of chloride by increasing the viscosity of the pore solution. The chloride binding capacity of the cement matrix significantly affects the service life of reinforced concrete owing to its high correlation with the concentration of free chloride. However, the influence of PEG on the chloride binding capacity of cement-based materials remains unclear. Through chloride concentration profiles, the assessment of solid phase content based on the TGA/XRD/reference intensity ratio method, and SEM morphology analysis, this study reveals the influence of PEG on chloride binding in mortar. The addition of PEG significantly reduced the chloride binding capacity of the cement matrix. Complexing Ca2+ on the surface of calcium silicate hydrate (C-S-H), to occupy the adsorption sites of chloride, reduces the physical adsorption capacity and the chemical binding ability of the matrix by inhibiting the conversion of ettringite (AFt) to monosulfoaluminate (AFm). Moreover, the addition of PEG spheroidizes C-S-H and reduces its particle size, leading to loose packing of C-S-H in the mortar. Thus, the findings of this study suggest that when PEG is used in cementitious materials, caution and corresponding measures are needed to optimize its impact on durability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Influence of SAP on the chloride penetration and corrosion behavior of steel bar in concrete10.1016/j.corsci.2020.108714 ↗
2. Free and bound chloride relationships affecting reinforcement cover in alkali activated concrete10.1016/j.cemconcomp.2020.103692 ↗
3. Distance-associated chloride binding capacity of cement paste subjected to natural diffusion10.1016/j.conbuildmat.2016.03.020 ↗
4. Chloride binding of cement-based materials subjected to external chloride environment – A review10.1016/j.conbuildmat.2008.02.004 ↗
5. Chloride binding of synthetic Ca-Al-NO3 LDHs in hardened cement paste10.1016/j.conbuildmat.2015.05.047 ↗
6. Physical modeling of the electrical double layer effects on multispecies ions transport in cement-based materials10.1016/j.cemconres.2008.06.003 ↗
7. Interactions between calcium silicate hydrate (C-S-H) and calcium chloride, bromide and nitrate10.1016/j.cemconres.2016.08.002 ↗
8. Binding of external chlorides by cement pastes
9. Interaction of chloride and C-S-H10.1016/0008-8846(90)90049-4 ↗
10. Pore solution composition and chloride binding capacity of silica-fume cement pastes10.1007/BF02474863 ↗
11. INTERACTION OF CHLORIDE AND C-S-H10.1016/0008-8846(90)90049-4 ↗
12. Stability of Friedel's salt in carbonated concrete structural elements10.1016/S0008-8846(96)85010-1 ↗
13. The effect of supplementary cementitious materials on chloride binding in hardened cement paste10.1016/j.cemconres.2011.01.001 ↗
14. Chloride transport and microstructure of concrete with/without fly ash under atmospheric chloride condition10.1016/j.conbuildmat.2017.04.018 ↗
15. Wick action in mature mortars with binary cements containing slag or silica fume - The relation between chloride and moisture transport properties under non-saturated conditions10.1016/j.cemconres.2018.06.006 ↗
16. Chloride ions transportation behavior and binding capacity of concrete exposed to different marine corrosion zones10.1016/j.conbuildmat.2018.05.120 ↗
17. Developing chloride resisting concrete using PFA10.1016/S0008-8846(97)00146-4 ↗
18. Chloride binding of cement pastes with fly ash exposed to CaCl2 solutions at 5 and 23 °C10.1016/j.cemconcomp.2018.12.011 ↗
19. Comparative study on chloride binding capacity of cement-fly ash system and cement-ground granulated blast furnace slag system with Diethanol-Isopropanolamine10.3390/ma13184103 ↗
20. Effect of triisopropanolamine on chloride binding of cement paste with ground-granulated blast furnace slag10.1016/j.conbuildmat.2020.119494 ↗
21. Influence of polycarboxylate superplasticizer on chloride binding in cement paste10.1016/j.conbuildmat.2017.10.086 ↗
22. Role of swelling agent and set-controlling admixtures on chloride binding and diffusion in cement matrix10.1016/j.conbuildmat.2019.117009 ↗
23. Electrochemical evaluation of the performance of corrosion-inhibiting systems in concrete bridges10.1016/S0958-9465(03)00041-6 ↗
24. Impact of phosphate corrosion inhibitors on chloride binding and release in cement pastes10.1016/j.conbuildmat.2019.117469 ↗
25. Mechanical properties of self curing concrete studied using polyethylene glycol-400: a-review
26. Effect of self-curing admixture on concrete properties in hot climate conditions10.1016/j.conbuildmat.2020.119933 ↗
27. Polyethylene glycol molecular weight as an important parameter affecting drying shrinkage and hydration of alkali-activated slag mortars and pastes10.1016/j.conbuildmat.2018.01.176 ↗
28. Doubling the service life of concrete structures. I: Reducing ion mobility using nanoscale viscosity modifiers10.1016/j.cemconcomp.2008.05.001 ↗
29. Using viscosity modifying admixture to reduce diffusion in cement-based materials: Effect of molecular mass10.1016/j.conbuildmat.2021.123207 ↗
30. Effect of polymers on the nanostructure and on the carbonation of calcium silicate hydrates: a scanning transmission X-ray microscopy study10.1007/s10853-011-5877-x ↗
31. Study on development of empirical relationships between durability parameters of concrete made with different types of binder and exposed to chloride environment10.1016/j.conbuildmat.2019.04.048 ↗
32. Comparing chloride ingress from seawater and NaCl solution in Portland cement mortar10.1016/j.cemconres.2018.09.014 ↗
33. 2013
34. The stability of bound chlorides in cement paste with sulfate attack10.1016/j.cemconres.2014.11.010 ↗
35. Characterization of high-calcium fly ashes and their potential influence on ettringite formation in cementitious systems10.1520/CCA10512J ↗
36. Chloride binding capacity and binding isotherms of OPC pastes and mortars10.1016/0008-8846(93)90089-R ↗
37. Long term performance of chloride binding capacity in fly ash concrete in a marine environment10.1016/j.conbuildmat.2009.12.039 ↗
38. Chloride binding capacity of green concrete mixed with fly ash or coal gangue in the marine environment10.1016/j.conbuildmat.2020.118006 ↗
39. Understanding the chloride binding and diffusion behaviors of marine concrete based on Portland limestone cement-alumina enriched pozzolans10.1016/j.conbuildmat.2018.11.270 ↗
40. Uptake of chloride and carbonate ions by calcium monosulfoaluminate hydrate10.1016/j.cemconres.2012.05.012 ↗
41. Effects of carbonated hardened cement paste powder on hydration and microstructure of Portland cement10.1016/j.conbuildmat.2018.07.159 ↗
42. Friedel’s salt formation in sulfoaluminate cements: a combined XRD and 27Al MAS NMR study10.1016/j.cemconres.2014.08.004 ↗
43. The influence of ethanol-diisopropanolamine on the hydration and mechanical properties of Portland cement10.1016/j.conbuildmat.2016.12.191 ↗
44. Friedel's salt profiles from thermogravimetric analysis and thermodynamic modelling of Portland cement-based mortars exposed to sodium chloride solution10.1016/j.cemconcomp.2017.01.002 ↗
45. Investigation on the performance of hydroxyethyl methyl cellulose modified cement mortars with Portland cement-calcium sulfoaluminate cement binders10.1016/j.conbuildmat.2021.122721 ↗
46. Modification of poly(ethylene glycol) on the microstructure and mechanical properties of calcium silicate hydrates10.1016/j.cemconres.2018.10.001 ↗
47. Surfactant-assisted sonochemical synthesis of hollow calcium silicate hydrate (CSH) microspheres for drug delivery10.1016/j.ultsonch.2010.01.012 ↗
48. Acceleration effect of synthesised calcium silicate hydrate with different morphologies and Ca/Si on cement hydration10.1680/jadcr.18.00016 ↗
49. Influence of surface hydrophilic/hydrophobic balance on enzyme properties10.1016/S0168-1656(97)00120-X ↗
50. Exploring the amphiphilicity of PEGylated gold nanorods: mechanical phase transfer and self-assembly10.1039/c3cc45103h ↗
51. Electrokinetic potential of hydrated cement in relation to adsorption of chlorides10.1016/j.cemconres.2009.01.006 ↗
52. Zeta-potential study of calcium silicate hydrates interacting with alkaline cations10.1006/jcis.2001.7897 ↗
53. Electrical double layer, ion transport and reactions in hardened cement paste10.1016/0008-8846(92)90101-Z ↗
54. A novel synthesis method of porous calcium silicate hydrate based on the calcium oxide/polyethylene glycol composites10.1155/2013/542109 ↗
55. Reactive molecular simulation on the calcium silicate hydrates/polyethylene glycol composites10.1016/j.cplett.2017.09.020 ↗
56. Mechanism of Friedel's salt formation in cements rich in tri-calcium aluminate10.1016/S0008-8846(96)85009-5 ↗
57. Friedel’s salt, Ca2Al(OH)6(Cl,OH)·2H2O: its solid solutions and their role in chloride binding10.1016/S0008-8846(98)00162-8 ↗
58. Adsorption of polyelectrolytes and its influence on the rheology, zeta potential, and microstructure of various cement and hydrate phases10.1016/j.jcis.2008.04.052 ↗