Debonding simulation of fibre-matrix interfaces of FRP composites with reactive force field
Source abstract
Abstract
Abstract This paper presents a study on all-atom molecular dynamics (MD) simulations of fibre–matrix interfaces in fibre-reinforced polymer (FRP) composites, with a focus on the effect of fibre sizing. The reactive force field ReaxFF was used in the simulations. The sizing treatment was found to significantly increase the interface toughness while has little effect on the peak stress of fibre–matrix interface. The characteristics of the fracture surfaces and the scission of C-O bonds observed in the simulations are consistent with pervious experimental observations. The developed modelling method opens up a new avenue of investigating the deterioration mechanism of FRP under combined mechanical-chemical-thermal actions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. Teng · 2002
2. A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties10.1016/j.conbuildmat.2010.04.062 ↗
3. Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites10.1016/S0950-0618(03)00094-1 ↗
4. FRP-to-concrete interfaces between two adjacent cracks: Theoretical model for debonding failure10.1016/j.ijsolstr.2005.07.023 ↗
5. Experimental study on CFRP-to-steel bonded interfaces10.1016/j.compositesb.2012.01.024 ↗
6. Behavior of hybrid FRP-concrete-steel double-skin tubular columns subjected to cyclic axial compression10.1016/j.tws.2012.06.003 ↗
7. Reinforced concrete beams strengthened in flexure with near-surface mounted (NSM) CFRP strips: Current status and research needs10.1016/j.compositesb.2017.07.072 ↗
8. Novel fiber-reinforced polymer cross wrapping strengthening technique: A comparative study10.1177/1369433219884451 ↗
9. Effectiveness of novel methods to increase the FRP-masonry bond capacity10.1016/j.compositesb.2016.09.060 ↗
10. Bank · 2006
11. Hybrid FRP–concrete–steel tubular columns: Concept and behavior10.1016/j.conbuildmat.2006.06.017 ↗
12. Novel hybrid FRP tubular columns with large deformation capacity: Concept and behaviour10.1016/j.compstruct.2019.01.055 ↗
13. Behavior and modelling of FRP-concrete-steel hybrid double-skin tubular columns under repeated unloading/reloading cycles10.1016/j.compstruct.2020.113393 ↗
14. Effect of fiber angles on hybrid fiber-reinforced polymer–concrete–steel double-skin tubular columns under monotonic axial compression10.1177/1369433219895916 ↗
15. Behaviour of FRP-confined compound concrete–filled circular thin steel tubes under axial compression10.1177/1369433219900941 ↗
16. Effects of thermal cycles on the mechanical response of pultruded GFRP profiles used in civil engineering applications10.1016/j.compstruct.2014.06.008 ↗
17. Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide (BMI) composite10.1016/j.matdes.2011.04.007 ↗
18. A review on the degradability of polymeric composites based on natural fibres10.1016/j.matdes.2012.11.025 ↗
19. Thermal cycling effects on the durability of a pultruded GFRP material for off-shore civil engineering structures10.1016/j.compstruct.2016.05.085 ↗
20. Mechanical properties and failure behaviour of carbon fibre-reinforced polymer composites under the influence of moisture10.1016/S1359-835X(96)00154-6 ↗
21. On estimates of durability of FRP based on accelerated tests10.1016/j.compstruct.2014.05.022 ↗
22. Lu C, Yang Y, He L. Mechanical and durability properties of GFRP bars exposed to aggressive solution environments. Sci Eng Compos Mater 2021; 28: 11-23.10.1515/secm-2021-0002 ↗
23. Micelli F, Myers JJ. Durability of FRP-confined concrete. Proc Instit Civ Eng-Constr Mater 2008; 161: 173-185.10.1680/coma.2008.161.4.173 ↗
24. Environmental Effects on the Mechanical Properties of Glass-FRP and Aramid-FRP Rebars10.1023/A:1026651218279 ↗
25. Creep and durability of sand-coated glass FRP bars in concrete elements under freeze/thaw cycling and sustained loads10.1016/j.cemconcomp.2006.07.014 ↗
26. Predictive multiscale model of delayed debonding for concrete members with adhesively bonded external reinforcement
27. Analytical model to predict the lifetime of concrete members externally reinforced with FRP10.1016/j.tafmec.2014.12.002 ↗
28. Enhanced Epoxy/Silica Composites Mechanical Properties by Introducing Graphene Oxide to the Interface10.1021/am3010576 ↗
29. Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures10.1016/j.compositesb.2017.02.002 ↗
30. Effect of Seawater and Warm Environment on Glass/Epoxy and Glass/Polyurethane Composites10.1007/s10443-010-9143-1 ↗
31. Long-term durability of basalt- and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment10.1016/j.conbuildmat.2017.02.038 ↗
32. Characterization of adhesive interphase between epoxy and cement paste via Raman spectroscopy and mercury intrusion porosimetry10.1016/j.cemconcomp.2018.01.012 ↗
33. A design of gradient interphase reinforced by silanized graphene oxide and its effect on carbon fiber/epoxy interface10.1016/j.matchemphys.2014.02.001 ↗
34. A robust nanoscale experimental quantification of fracture energy in a bilayer material system10.1073/pnas.1402893111 ↗
35. Moisture effect on the mechanical and interfacial properties of epoxy-bonded material system: An atomistic and experimental investigation10.1016/j.polymer.2014.12.026 ↗
36. Effect of moisture on the mechanical properties of CFRP–wood composite: An experimental and atomistic investigation10.1016/j.compositesb.2014.10.051 ↗
37. Molecular dynamics simulations on adhesion of epoxy-silica interface in salt environment10.1016/j.compositesb.2017.07.038 ↗
38. Moisture effect on interfacial integrity of epoxy-bonded system: a hierarchical approach
39. Effects of moisture ingress on the bond between carbon fiber and epoxy resin investigated with molecular dynamics simulation10.1002/pc.24459 ↗
40. Molecular dynamics study on the effect of salt environment on interfacial structure, stress, and adhesion of carbon fiber/epoxy interface. Compos
41. Wang XQ, Lau D. Atomistic investigation of GFRP composites under chloride environment. Adv Struct Eng 2020: 1369433220961749.10.1177/1369433220961749 ↗
42. Degradation of epoxy/glass interface in hygrothermal environment: An atomistic investigation10.1016/j.compositesb.2020.108534 ↗
43. Structural solution using molecular dynamics: Fundamentals and a case study of epoxy-silica interface10.1016/j.ijsolstr.2011.03.018 ↗
44. Theoretical investigation of epoxy detachment from C-S-H interface under aggressive environment10.1016/j.conbuildmat.2020.120232 ↗
45. Insights on the adhesive properties and debonding mechanism of CFRP/concrete interface under sulfate environment: From experiments to molecular dynamics10.1016/j.conbuildmat.2020.121247 ↗
46. Effect of glass fiber surface treatments on mechanical strength of epoxy based composite materials10.1006/jcis.2002.8332 ↗
47. Concentration effect of γ-glycidoxypropyltrimethoxysilane on the mechanical properties of glass fiber–epoxy composites10.1002/pc.20686 ↗
48. Grafting of polyhedral oligomeric silsesquioxanes on a carbon fiber surface: novel coupling agents for fiber/polymer matrix composites10.1039/c0jm03128c ↗
49. Mechanical and thermo-mechanical behaviors of sizing-treated corn fiber/polylactide composites10.1016/j.polymertesting.2014.07.014 ↗
50. The Effect of Temperature and Strain Rate on the Interfacial Behavior of Glass Fiber Reinforced Polypropylene Composites: A Molecular Dynamics Study10.3390/polym11111766 ↗
51. A second-generation reactive empirical bond order (REBO) potential energy expression for hydrocarbons
52. A reactive potential for hydrocarbons with intermolecular interactions10.1063/1.481208 ↗
53. ReaxFF: A reactive force field for hydrocarbons10.1021/jp004368u ↗
54. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
55. A molecular dynamics investigation on the cross-linking and physical properties of epoxy-based materials10.1039/C4RA04298K ↗
56. Atomistic molecular modelling of crosslinked epoxy resin10.1016/j.polymer.2006.06.025 ↗
57. Structure and energetics of ligand binding to proteins: Escherichia coli dihydrofolate reductase-trimethoprim, a drug-receptor system10.1002/prot.340040106 ↗
58. Molecular modelling of epoxy resin crosslinking experimentally validated by near-infrared spectroscopy10.1016/j.commatsci.2019.01.054 ↗
59. New spherical-cutoff methods for long-range forces in macromolecular simulation10.1002/jcc.540150702 ↗
60. E-glass fiber reinforced composites in dental applications10.1007/s12633-011-9075-x ↗
61. Influence of silane coupling agents on surface properties of precipitated silicas10.1016/S0169-4332(00)00828-X ↗
62. Optimization of Silica Silanization by 3-Aminopropyltriethoxysilane10.1021/la061240g ↗
63. Study of Grafted Silane Molecules on Silica Surface with an Atomic Force Microscope10.1021/la951098b ↗
64. Surface hydroxylation and silane grafting on fumed and thermal silica10.1016/S0021-9797(03)00552-6 ↗
65. Thermal and dielectric properties and curing kinetics of nanomaterials formed from poss-epoxy and meta-phenylenediamine10.1016/j.polymer.2004.07.070 ↗
66. The temperature-dependence of some mechanical properties of a cured epoxy resin system10.1002/pen.760251305 ↗
67. Toughening of carbon fiber-reinforced epoxy polymer composites utilizing fiber surface treatment and sizing10.1016/j.compositesa.2016.09.005 ↗
68. A molecular dynamics simulation study on enhancement of mechanical and tribological properties of polymer composites by introduction of graphene10.1016/j.carbon.2016.10.039 ↗
69. A molecular dynamics method for simulations in the canonical ensemble10.1080/00268978400101201 ↗
70. Canonical dynamics: Equilibrium phase-space distributions10.1103/PhysRevA.31.1695 ↗
71. Molecular dynamics simulations of methanol to olefin reactions in HZSM-5 zeolite using a ReaxFF force field10.1021/jp300221j ↗
72. Continuum interpretation of virial stress in molecular simulations10.1016/j.ijsolstr.2008.03.016 ↗
73. Some new mesoscopic crossover length scales concerning the Hamaker constant10.1007/s11431-019-1487-5 ↗
74. France Lanord A, Rigby D, Mavromaras A, Eyert V, Saxe P, Freeman C, Wimmer E In MedeA®: Atomistic simulations for designing and testing materials for micro/nano electronics systems, 2014 15th International Conference on Thermal, Mechanical and Mulit-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), IEEE: 2014; pp 1-8.10.1109/EuroSimE.2014.6813850 ↗
75. The dependence of interfacial shear strength on matrix and interphase properties10.1002/pc.750120108 ↗
76. Thermal conductivity, specific heat, and dynamic mechanical behavior of diglycidyl ether of bisphenol a cured with m-phenylenediamine10.1002/app.1969.070131115 ↗
77. Dupré · 1869
78. Adhesives technology handbook
79. Stretching single molecules into novel conformations using the atomic force microscope10.1038/78936 ↗
80. An internal state variable material model for predicting the time, thermomechanical, and stress state dependence of amorphous glassy polymers under large deformation10.1016/j.ijplas.2012.10.005 ↗
81. A general inelastic internal state variable model for amorphous glassy polymers10.1007/s00707-010-0349-y ↗
82. Effects of hygrothermal aging and a silane coupling agent on the tensile properties of injection molded short glass fiber reinforced poly(butylene terephthalate) composites10.1016/S0014-3057(01)00033-7 ↗
83. Kinetic concept of the strength of solids10.1007/BF03545562 ↗
84. Accelerated ageing behavior of compatible IPNs based on epoxy and methacrylated epoxy resins10.1016/S0141-3910(97)00115-8 ↗
85. Chemical degradation of amine-cured DGEBA epoxy resin in supercritical 1-propanol for recycling carbon fiber from composites10.1007/s10118-014-1519-5 ↗