Corrosion features and time-dependent corrosion model of Galfan coating of high strength steel wires
Source abstract
Abstract
Abstract The Galfan coating (Zn-5%Al-RE) is widely used in high strength steel wires, which are commonly adopted in the construction of modern civil structures. The present research aims at the macroscopic and microscopic corrosion features, and the time-dependent probabilistic corrosion models of Galfan coating. To achieve these goals, accelerated corrosion experiments are conducted. The field emission scanning electron microscope and the three-dimensional surface morphometer are employed to observe the corrosive surface morphology. It is found that the macroscopic corrosion feature and the microscopic corrosion feature of Galfan coating can be divided into four stages and three stages, respectively. The increasing of average uniform corrosion depth of Galfan coating shows a parabolic law with the extension of exposure period. The dynamic generalized extreme value distribution is more suitable than other distributions in establishing the time-dependent probabilistic corrosion model of Galfan coating, and the block maximum pitting factor can be described by Gumbel distribution. Both the location parameter and scale parameter of the proposed model decrease exponentially with the extension of exposure period. In the last, an application method of the proposed model is provided by solving the problem of exposure period conversion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Non-Destructive Testing Techniques · Structural Integrity and Reliability Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Complex failure analysis of a cable-roofed stadium structure based on diagnostics and tests10.1016/j.engfailanal.2019.04.051 ↗
2. Experimental study of corrosion effects on high-strength steel wires considering strain influence10.1016/j.conbuildmat.2019.117910 ↗
3. An improved continuum damage mechanics model for evaluating corrosion–fatigue life of high-strength steel wires in the real service environment10.1016/j.ijfatigue.2020.105540 ↗
4. Damage evolution simulation and life prediction of high-strength steel wire under the coupling of corrosion and fatigue10.1016/j.corsci.2019.108368 ↗
5. Predicting corrosion fatigue crack propagation behavior of HRB400 steel bars in simulated corrosive environments10.1061/(ASCE)MT.1943-5533.0003761 ↗
6. A facile method for constructing a superhydrophobic zinc coating on a steel surface with anti-corrosion and drag-reduction properties10.1016/j.apsusc.2021.150192 ↗
7. Effect of fluxing chemical: an option for Zn–5wt.%Al alloy coating on wire surface by single hot dip process10.1016/j.surfcoat.2011.01.026 ↗
8. Magnesium inclusion effect on Al-Zn-Cu alloys: a study on microstructure and mechanical properties
9. The precipitation competition of η-series precipitates and δ' precipitates in Li-containing Al-Zn-Mg-Cu alloys10.1016/j.commatsci.2021.110707 ↗
10. Effects of environmental factors on stress corrosion cracking of cold-drawn high-carbon steel wires10.1016/j.corsci.2017.12.014 ↗
11. Uniform and pitting corrosion modeling for high-strength bridge wires10.1061/(ASCE)BE.1943-5592.0000598 ↗
12. Behavior of wires in parallel wire stayed cable under general corrosion effects10.1016/j.jcsr.2013.02.010 ↗
13. Failure analysis of high-strength steel wire under random corrosion10.1016/j.istruc.2021.04.082 ↗
14. Effect of cathodic protection current density on corrosion rate of high-strength steel wires for stay cable in simulated dynamic marine atmospheric rainwater10.1016/j.istruc.2020.12.028 ↗
15. Investigation of the impressed current cathodic protection method for the cable parallel wires in the rainwater electrolyte based on acoustic emission method10.1016/j.conbuildmat.2019.116918 ↗
16. Geometric characteristics of corrosion pits on high-strength steel wires in bridge cables under applied stress10.1080/15732479.2020.1730408 ↗
17. Experimental study and residual performance evaluation of corroded high-tensile steel wires10.1061/(ASCE)BE.1943-5592.0001114 ↗
18. Experimental study and residual fatigue life assessment of corroded high-tensile steel wires using 3D scanning technology10.1016/j.engfailanal.2021.105335 ↗
19. Effective corrosion protection of aluminum alloy AA2024-T3 with novel thin nanostructured oxide coating10.1016/j.surfcoat.2021.126993 ↗
20. Wear and corrosion resistant performance of thermal-sprayed Fe-based amorphous coatings: a review10.1016/j.surfcoat.2019.124896 ↗
21. Investigation of corrosion resistance and interfacial bonding properties of Zn/Zn–Al multilayer coating/steel substrate system10.1061/(ASCE)MT.1943-5533.0003509 ↗
22. On the distribution of the trace elements V and Cr in an Al–Zn–Si alloy coating on a steel substrate10.1016/j.mtla.2020.100669 ↗
23. Hu X-j, Chen S-h, Xie Z-h, Jiang J-q. Revealing microstructural and mechanical characteristics of cold-drawn pearlitic steel wires undergoing simulated galvanization treatment10.1016/j.msea.2012.03.075 ↗
24. The corrosion-fatigue measurement test of the Zn-Al alloy coated steel wire10.1016/j.istruc.2020.07.022 ↗
25. Influence of Nd addition on the corrosion behavior of Zn-5%Al alloy in 3.5wt.% NaCl solution10.1016/j.apsusc.2017.07.109 ↗
26. Corrosion performance of hot-dip galvanized zinc-aluminum coated steel rebars in comparison to the conventional pure zinc coated rebars in concrete environment10.1016/j.conbuildmat.2020.121921 ↗
27. Influence of temperature on corrosion rate and porosity of corrosion products of carbon steel in anoxic bentonite environment10.1016/j.jnucmat.2013.06.031 ↗
28. The effect of temperature on the corrosion rate of iron-carbon alloys
29. Evaluation of thermal effects on cable forces of a long-span prestressed concrete cable-stayed bridge10.1061/(ASCE)CF.1943-5509.0001348 ↗
30. The effect of grain boundary character evolution on the intergranular corrosion behavior of advanced Al-Mg-3wt%Zn alloy with Mg variation10.1016/j.matchar.2018.09.044 ↗
31. Corrosion on silvered-glass solar reflectors exposed to accelerated aging tests with polluting gases: a microscopic study10.1016/j.corsci.2020.108928 ↗
32. A transmission electron microscopy study of microscopic causes for localized-corrosion morphology variations in the AA7055 Al alloy10.1016/j.jmst.2018.05.006 ↗
33. Huang · 2008
34. A small-window moving average-based fully automated baseline estimation method for Raman spectra10.1366/11-06550 ↗
35. Time-dependent reliability assessment of existing concrete bridges including non-stationary vehicle load and resistance processes10.1016/j.engstruct.2019.109426 ↗
36. T.M.Y. Aoki, T. Kittaka, Results of 10-year atmospheric corrosion testing of hot dip Zn-5mass% Al alloy coated sheet steel, in: Society IaS, editor. Galvatech. Chicago 1995. p. 463.
37. Long-term atmospheric corrosion properties of thermally sprayed Zn, Al and Zn–Al coatings exposed in a coastal area10.1016/j.corsci.2013.05.021 ↗
38. Grain boundary wetting by a solid phase; microstructural development in a Zn–5 wt% Al alloy10.1016/j.actamat.2004.06.011 ↗
39. Atmospheric corrosion of Zn–Al coatings in a simulated automotive environment10.1080/02670844.2017.1305658 ↗