journal article·2021-12

Thermal, mechanical and ultrasonic properties of cemented tailings backfill subjected to microwave radiation

Wei Sun, Di Wu, Huaibin Liu, Chunlai Qu

Publisher page

Abstract

Abstract Cemented tailings backfill (CTB), which is normally prepared by mixing tailings, binder and water, is applied to fill underground mined-out areas for ground control and waste disposal. When the CTB is placed underground, it should quickly gain satisfactory strength to ensure safe and efficient mining production. However, in some high-altitude areas, such as the Qinghai-Tibet Plateau, the low temperature limits the strength development in the CTB. As a result, it is necessary to develop a method, such as microwave technique, to provide fast and effective temperature rise for the CTB. In this paper, the thermal, mechanical and ultrasonic properties of CTB subjected to microwave radiation are studied. The obtained results indicate that the microwave technology can significantly affect the temperature distribution, strength development and structural compactness of the CTB. When the same microwave energy is applied, the thermal, mechanical and ultrasonic behaviors of the CTB vary with different curing age, solid content and binder-to-tailings ratio. The current study reveals that the microwave technique can reliably improve the stability and durability of the prepared CTB structures. Therefore, this study can contribute to a further step for the practical application of the microwave technique to the CTB technology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Tailings Management and Properties · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Microstructural evolution of cemented paste backfill: Mercury intrusion porosimetry test results10.1016/j.cemconres.2007.08.016 ↗
2. The effect of desliming by sedimentation on paste backfill performance10.1016/S0892-6875(03)00267-X ↗
3. Cyclic Shear Response of Cemented Paste Backfill10.1061/(ASCE)GT.1943-5606.0001581 ↗
4. Geotechnical considerations in mine backfilling in Australia10.1016/j.jclepro.2004.06.007 ↗
5. Evaluation of paste backfill mixtures consisting of sulphide-rich mill tailings and varying cement contents10.1016/j.cemconres.2004.01.018 ↗
6. Effects of coupled sulphate and temperature on internal strain and strength evolution of cemented paste backfill at early age10.1016/j.conbuildmat.2019.116937 ↗
7. Coupled effect of curing temperature and age on compressive behavior, microstructure and ultrasonic properties of cemented tailings backfill10.1016/j.conbuildmat.2019.117738 ↗
8. Temperature dependence of the reactivity of cemented paste backfill10.1016/j.apgeochem.2016.06.005 ↗
9. Combined influence of sulphate and temperature on the saturated hydraulic conductivity of hardened cemented paste backfill10.1016/j.cemconcomp.2013.03.015 ↗
10. Effect of high temperature on strength and microstructural properties of cemented paste backfill10.1016/j.firesaf.2008.12.004 ↗
11. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes10.1016/j.cemconres.2006.11.016 ↗
12. Yield stress of cemented paste backfill in sub-zero environments: Experimental results10.1016/j.mineng.2016.03.014 ↗
13. Effects of Air Temperature and Precipitation on Soil Moisture on the Qinghai-Tibet Plateau during the 2015 Growing Season10.1155/2020/4918945 ↗
14. Preparation and bioactivity of apatite coating on Ti6Al4V alloy by microwave assisted aqueous chemical method10.1016/j.ceramint.2016.08.182 ↗
15. Microwave Plasma-Enhanced and Microwave Heated Chemical Reactions10.1007/s11090-019-10040-7 ↗
16. Microwave heating temperatures and pharmaceutical powder characteristics
17. Very High Early Strength of Microwave Cured Concrete10.1016/0008-8846(94)00121-E ↗
18. Effect of low-pressure microwave-accelerated curing on the drying shrinkage and water permeability of Portland cement pastes
19. Accelerated microwave curing of concrete: A design and performance-related experiments10.1016/j.cemconcomp.2017.08.007 ↗
20. A novel rapid microwave-thermal process for accelerated curing of concrete: Prototype design, optimal process and experimental investigations10.1016/j.conbuildmat.2016.07.084 ↗
21. Accelerated curing at an early-age of cement-based materials using microwave energy: A proposed heat transfer model10.1088/1757-899X/18/20/202020 ↗
22. Utilization of microwave-accelerated heating and dewatering in low-pressure conditions to accelerated-cure Type-I cement paste for early-age compressive strength development
23. Microwave curing at an operating frequency of 2.45GHz of Portland cement paste at early-stage using a multi-mode cavity: Experimental and numerical analysis on heat transfer characteristics10.1016/j.icheatmasstransfer.2010.09.001 ↗
24. Development of a high strength fly ash-based geopolymer in short time by using microwave curing10.1016/j.ceramint.2018.02.001 ↗
25. Role of microwave radiation in curing the fly ash geopolymer10.1016/j.apt.2012.12.005 ↗
26. Mechanical parameters of cemented paste backfilling and its failure modes under different loading rates
27. A coupled THMC modeling application of cemented coal gangue-fly ash backfill10.1016/j.conbuildmat.2017.10.009 ↗
28. A Coupled Thermo-mechanical Damage Modeling Application of Cemented Coal Gangue-Fly Ash Backfill Under Uniaxial Compression10.1007/s13369-019-04118-9 ↗
29. Influence of fiber reinforcement on mechanical behavior and microstructural properties of cemented tailings backfill10.1016/j.conbuildmat.2019.04.080 ↗
30. Effect of the Cement-Tailing Ratio on the Hydration Products and Microstructure Characteristics of Cemented Paste Backfill10.1007/s13369-019-03954-z ↗
31. Influence of structural factors on uniaxial compressive strength of cemented tailings backfill10.1016/j.conbuildmat.2018.04.126 ↗
32. Loading rate effect on uniaxial compressive strength behavior and acoustic emission properties of cemented tailings backfill10.1016/j.conbuildmat.2019.04.082 ↗
33. Mechanical performance and ultrasonic properties od cemented gangue backfill with admixture of fly ash10.1016/j.ultras.2015.08.004 ↗
34. Relationship between ultrasonic pulse velocity and uniaxial compressive strength for cemented paste backfill with alkali-activated slag10.1080/10589759.2019.1679140 ↗
35. Predicting the uniaxial compressive strength of cemented paste backfill from ultrasonic pulse velocity test10.1080/10589759.2015.1111891 ↗
36. Determination of basic physical and mechanical properties of basaltic rocks from P-wave velocity10.1080/10589759.2013.823606 ↗
37. Effect of mineral admixtures on the correlation between ultrasonic velocity and compressive strength for self-compacting concrete10.1134/S1061830908050100 ↗
38. Strength and ultrasonic properties of cemented paste backfill10.1016/j.ultras.2013.04.013 ↗
39. Evaluation of the strength and ultrasonic properties of foam-cemented paste backfill10.1080/17480930.2016.1215782 ↗
40. Effect of microwave heating on thermo-mechanical behavior of cemented tailings backfill10.1016/j.conbuildmat.2020.121180 ↗