journal article·2022-02Open access

Selection of backfill grout for shallow geothermal systems: Materials investigation and thermo-physical analysis

Ludovico Mascarin, Enrico Garbin, Eloisa Di Sipio, Giorgia Dalla Santa, David Bertermann, Gilberto Artioli, Adriana Bernardi, Antonio Galgaro

Abstract

A main aspect of the geothermal well design is the selection of grouts backfilling the space between a geothermal probe and the surrounding ground, taking into consideration the mineralogical, thermo–physical, mechanical and flowability properties. The EU GEO4CIVHIC project aimed at developing efficient and cost-effective geothermal systems suitable for the air-conditioning refurbishment of urban buildings. A selection of different grouts was performed to ensure the whole efficiency of shallow geothermal heat exchangers designed within the project. Experimental tests were executed to identify flowable grouts with the best possible combination of different material properties, while also fulfilling a competitive cost target set forth in the preliminary project cost analysis. Grout acceptance criteria were defined: a working time of at least 4 h, a water bleeding target of 2% and a volumetric shrinkage upper bound of 4%, a thermal conductivity in water saturated conditions of at least 1.4 to 1.5 Wm−1K−1, a compressive strength range of 1 to 2.1 MPa, a flow time range of 60 ± 15 s. Two out of six commercial grouts were selected for installations onsite.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Geothermal Energy Systems and Applications · Geotechnical Engineering and Analysis · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Thermal conductivity of cementitious grouts and impact on heat exchanger length design for ground source heat pumps10.1080/10789669.1999.10391226 ↗
2. Efficiency of various grouting materials for borehole heat exchangers10.1016/j.applthermaleng.2014.05.034 ↗
3. Effects of fine particles on thermal conductivity of mixed silica sands10.3390/app7070650 ↗
4. Investigation of shallow geothermal potentials for different types of ground source heat pump systems (GSHP) of Wuhan city in China10.1016/j.renene.2017.11.017 ↗
5. Ground-source heat pumps systems and applications10.1016/j.rser.2006.10.003 ↗
6. An updated ground thermal properties database for GSHP applications10.1016/j.geothermics.2019.101758 ↗
7. Ground source heat pump systems in historical buildings: two Italian case studies10.1016/j.egypro.2017.09.383 ↗
8. Experimental analysis of enhanced cement-sand-based geothermal grouting materials10.1016/j.conbuildmat.2018.07.076 ↗
9. Geothermal heat pump systems: Status review and comparison with other heating options10.1016/j.apenergy.2012.01.048 ↗
10. Banks · 2012
11. Kavanaugh · 2014
12. Toth · 2017
13. Ground source heat pump carbon emissions and ground-source heat pump systems for heating and cooling of buildings: a review10.1002/ep.12802 ↗
14. Development of advanced materials guided by numerical simulations to improve performance and cost-efficiency of borehole heat exchangers (BHEs)10.1016/j.energy.2020.117628 ↗
15. Current state of the art of geothermal heat pumps as applied to buildings10.1080/17512549.2012.672004 ↗
16. EU GEO4CIVHIC project, Most Easy, Efficient and Low Cost Geothermal Systems for Retrofitting Civil and Historical Buildings. https://geo4civhic.eu/, 2021 (last access 1 March 2021).
17. Simulation-based comparison between the thermal behavior of coaxial and double U-tube borehole heat exchangers10.3390/en12122321 ↗
18. Distributed thermal response tests on pipe-in-pipe borehole heat exchangers10.1016/j.apenergy.2013.01.024 ↗
19. Designing coaxial ground heat exchangers with a thermally enhanced outer pipe
20. Experimental characterization and performance evaluation of geothermal grouting materials subjected to heating–cooling cycles10.1016/j.conbuildmat.2015.08.132 ↗
21. Materials characterization of superplasticized cement–sand grout10.1016/S0008-8846(00)00275-1 ↗
22. A comprehensive review of backfill materials and their effects on ground heat exchanger performance10.3390/su10124486 ↗
23. Thermal properties variations in unconsolidated material for very shallow geothermal application (ITER project)10.1515/intag-2017-0002 ↗
24. Laboratory characterization and modelling of the thermal-mechanical properties of binary soil mixtures10.1016/j.sandf.2019.11.013 ↗
25. Efficiency analysis of utilizing phase change materials as grout for a vertical U-tube heat exchanger coupled ground source heat pump system10.1016/j.applthermaleng.2017.11.062 ↗
26. Laboratory investigation on the use of thermally enhanced phase change material to improve the performance of borehole heat exchangers for ground source heat pumps10.1002/er.4522 ↗
27. A review of grout materials in geothermal energy applications10.1016/j.ijft.2021.100070 ↗
28. Modelling and evaluation of groundwater filled boreholes subjected to natural convection10.1016/j.apenergy.2019.113555 ↗
29. Influence of debonding in ground heat exchangers used with geothermal heat pumps10.1016/S0375-6505(01)00011-6 ↗
30. Study of different grouting materials used in vertical geothermal closed-loop heat exchangers10.1016/j.applthermaleng.2012.05.029 ↗
31. Characteristics of thermally-enhanced bentonite grouts for geothermal heat exchanger in South Korea10.1007/s11431-009-0413-9 ↗
32. Analysis and study of different grouting materials in vertical geothermal closed-loop systems10.1016/j.renene.2017.08.011 ↗
33. Doped bentonitic grouts for implementing performances of low-enthalpy geothermal systems
34. Enhancement of geothermal borehole heat exchangers performances by improvement of bentonite grouts conductivity10.1016/j.applthermaleng.2011.09.017 ↗
35. Structural analysis of geothermal well cements10.1016/S0375-6505(02)00029-9 ↗
36. Freeze–thaw durability of cement-based geothermal grouting materials10.1016/j.conbuildmat.2014.01.051 ↗
37. Principal Points in Cementing Geothermal Wells
38. Nelson · 1990
39. Environment Agency, Environmental Good Practice Guide for Ground Source Heating and Cooling - GEHO0311BTPA-E-E, The Environment Agency, Bristol (UK). https://www.gshp.org.uk/pdf/EA_GSHC_Good_Practice_Guide.pdf, 2011 (accessed September 2021).
40. Deliverable D2.4, Simulation and design of co-axial heat exchangers with regard to performance and costs, EU GEO4CIVHIC – Most Easy, Efficient and Low Cost Geothermal Systems for Retrofitting Civil and Historical Buildings. https://geo4civhic.eu/, 2019 (last access 1 March 2021).
41. EN 12715, Execution of special geotechnical work - Grouting, European Committee for Standardization, Brussels (Belgium), 2000.
42. Quantitative phase analysis using the Rietveld method10.1107/S0021889887009415 ↗
43. TOPAS and TOPAS-Academic: an optimization program integrating computer algebra and crystallographic objects written in C++10.1107/S1600576718000183 ↗
44. 2005
45. TCE1: Adiabatic and semi-adiabatic calorimetry to determine the temperature increase in concrete due to hydration heat of the cement10.1007/BF02524773 ↗
46. 1990
47. 1999
48. 2016
49. 2013
50. Engineering properties of controlled low strength material (CLSM) incorporating red mud
51. Utilization of controlled low strength material (CLSM) as a novel grout for geothermal systems: Laboratory and field experiments10.1016/j.jobe.2019.101110 ↗
52. 2016
53. G. Lombardi, The role of cohesion in cement grouting of rock, in: Proceedings of the 15th International Congress on Large Dams – ICOLD, Lausanne (Switzerland), Q.58 R.13, 1985, pp. 235–261.
54. Optimization of cement-based grouts using chemical additives10.1016/j.jrmge.2016.11.013 ↗
55. ISRM suggested methods for determining thermal properties of rocks from laboratory tests at atmospheric pressure10.1007/s00603-016-1070-5 ↗
56. 2006
57. Strengthening of three-leaf stone masonry walls: an experimental research10.1617/s11527-012-9832-3 ↗
58. V. Alizadeh, A Rapid Construction Technique for Bridge Abutments Using Controlled Low Strength Materials (CLSM), The University of Wisconsin-Milwaukee Milwaukee (Wisconsin, USA), Ph.D. Thesis Dissertation. https://dc.uwm.edu/etd/556, 2013 (accessed 21 March 2019).
59. 2007
60. The marsh cone as a viscometer: Theoretical analysis and practical limits10.1007/BF02480571 ↗
61. The Marsh cone: a test or a rheological apparatus?10.1016/j.cemconres.2004.08.019 ↗
62. 2016
63. Fresh concrete: a Herschel-Bulkley material10.1007/BF02480474 ↗
64. Roussel · 2012
65. In-situ rheological characterization of drilling mud10.2118/66285-PA ↗
66. Properties of SCC produced with limestone filler or viscosity modifying admixture10.1061/(ASCE)MT.1943-5533.0000030 ↗
67. Rheological properties and surface finish quality of eco-friendly self-compacting concretes containing quarry waste powders10.1016/j.jclepro.2020.120508 ↗
68. The analysis of secondary raw materials usage in self-compacting concrete production
69. Dolomitic filler in self-compacting concrete: a review, RILEM Tech
70. Molecular modeling of initiation of interlayer swelling in Na–montmorillonite expansive clay10.1139/cgj-2014-0309 ↗
71. Taylor · 1997
72. Neville · 1995
73. P. Monnot, Guide techniques et norms appliqués à la géothermie très basse énergie – Bilan de l’année 2013 – Rapport final BRGM/RP–63016–FR, Bureau de Recherches Géologiques et Minières, Orléans (France). http://infoterre.brgm.fr/rapports/RP-63016-FR.pdf, 2013 (last access 1 March 2021).
74. 2019
75. 2016
76. A comparative study of modified fall cone method and semi-adiabatic calorimetry for measurement of setting time of cement based materials10.1016/j.conbuildmat.2020.118634 ↗
77. Clay dosage and water/cement ratio of clay-cement grout for optimal engineering performance10.1016/j.clay.2018.07.035 ↗
78. Evaluation of coal ash-based CLSM made with cementless binder as a thermal grout for borehole heat exchangers10.1061/(ASCE)MT.1943-5533.0002691 ↗
79. de Larrard · 1999
80. Neville · 2010
81. The grouting of prestressing ducts
82. 2007
83. 2019
84. Thermal performance evaluation of vertical U-loop ground heat exchanger using in-situ thermal response test10.1016/j.renene.2015.10.059 ↗
85. M. Allan, A. Philippacopoulos, Performance characteristics and modelling of cementitious grouts for geothermal heat pumps, in: Proceedings of the World Geothermal Congress, Kyushu–Tohoku (Japan), 2000, pp. 3355–3360. https://www.geothermal-energy.org/pdf/IGAstandard/WGC/2000/R0095.PDF, (last access 1 March 2021).
86. A numerical study on the impact of grouting material on borehole heat exchangers performance in aquifers10.3390/en10050703 ↗
87. Transient ground and grout parameters estimation method for a ground-coupled heat pump system with sandbox TRT reference data10.1016/j.proeng.2017.10.217 ↗
88. Estimation of soil and grout thermal properties through a TSPEP (two-step parameter estimation procedure) applied to TRT (thermal response test) data10.1016/j.energy.2010.12.031 ↗
89. Transient thermal resistance of borehole heat exchangers for hourly simulations of geothermal heat pumps systems
90. Factors influencing the thermal efficiency of horizontal ground heat exchangers10.3390/en10111897 ↗
91. Soil thermal behavior in different moisture condition: an overview of ITER Project from laboratory to field test monitoring10.1007/s12665-018-7454-y ↗
92. Critical review of thermal conductivity models for unsaturated soils10.1007/s10706-015-9843-2 ↗
93. Fundamental study of thermal conduction in dry soils10.1007/s10035-007-0051-5 ↗
94. API work group reports field tests of geothermal cements
95. Alkali-activated aluminosilicate sealing system for deep high-temperature well applications10.1016/j.geothermics.2020.101935 ↗
96. M.R. Valluzzi, Comportamento meccanico di murature consolidate con materiali e tecniche a base di calce, Ph.D. Thesis Dissertation (in Italian), University of Trieste, Trieste (Italy). https://www.openstarts.units.it/handle/10077/11393, 2000 (accessed 3 June 2019).
97. M. Milan, Cantierabilità di iniezioni consolidanti con miscele non cementizie – applicazione al museo archeologico di Verona, M.Sc. Thesis Dissertation (in Italian), University of Padova, Padova (Italy). http://tesi.cab.unipd.it/48924/, 2015 (accessed 3 June 2019).
98. Prediction of groutability from grout properties and hydrogeological data10.1016/0886-7798(96)00027-2 ↗
99. Houlsby · 1990
100. Simple field tests to characterize fluidity and washout resistance of structural cement grout10.1520/CCA10448J ↗