journal article·2019-04-01

3D-Printed Conformal Array Patch Antenna Using a Five-Axes Motion Printing System and Flash Light Sintering

Fanbo Meng, Jin Huang, Pengbing Zhao

Publisher page

Abstract

Abstract A conformal microstrip antenna is highly integrated with the carrier profile, giving it the advantage of reduced carrier space. However, the processing technology for fabricating an antenna with a conformal surface is complicated and expensive owing to its irregular shape. Therefore, it is particularly important to find ways to reduce the difficulty in producing conformal conductive patterns. For the production of conformal microstrip antennas, a five-axes motion printing system is proposed to print conductive patterns on nonexpanded surfaces. The conductive pattern uses a new boundary-alignment-optimization algorithm in the printing process to improve the accuracy of the boundary of the conductive pattern by optimizing the ink-dropping points in the motion command. The short-time and low-temperature sintering of the conductive pattern by using a flash light enables it to exhibit conductive properties. This method is practically implemented to fabricate a conformal array microstrip antenna. The main and side lobes of the electric and magnetic fields in the directional pattern measured in the microwave darkroom have the same trend as in the simulation diagram. Thus, the effectiveness of this method was verified through simulation analysis and experimental results.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Additive Manufacturing and 3D Printing Technologies · Antenna Design and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Electronic Equipment Structure Design, Ministry of Education, Xidian University, Xi'an, China.

References (18)

Show source-provided references
1. Taha A, , Elwi Z, , Abbas MN, et al. Conformal antenna array for MIMO applications. J Electromagnet Anal Appl, 2014; 6:43–50.
2. Fernandes HCC, , Neto AS, , Da Silva Barreto T. Conformal antennas array for wireless communications at 2.5GHZ. J Commun Comput, 2013; 13:266–269.
3. 10.1109/LAWP.2011.217899910.1109/LAWP.2011.2178999 ↗
4. 10.1007/s00170-015-7507-210.1007/s00170-015-7507-2 ↗
5. 10.1007/s00170-015-7244-610.1007/s00170-015-7244-6 ↗
6. 10.1149/1.207367010.1149/1.2073670 ↗
7. 10.1002/adma.20130125710.1002/adma.201301257 ↗
8. Han Y, , Wei C, , Dong J. Droplet formation and settlement of phase-change ink in high resolution electrohydrodynamic (EHD) 3D printing. J Manuf Processes, 2015; 342.
9. 10.1007/s10853-006-6653-110.1007/s10853-006-6653-1 ↗
10. Kim Y, , Lee B, , Yang S, et al. Use of copper ink for fabricating conductive electrodes and RFID antenna tags by screen printing. Curr Appl Phys, 2013; 101:2038–2048.
11. 10.1109/TCPMT.2014.232073010.1109/TCPMT.2014.2320730 ↗
12. 10.1111/j.1151-2916.2002.tb00168.x10.1111/j.1151-2916.2002.tb00168.x ↗
13. Liu Y. Research on the motion control system of curve inkjet. Dissertation. Beijing Institute of Graphic Communication 2015.
14. Gazeau JP, , Zeghloul S, , Ramirez-Torres G. A novel 5-axis robot for printing high resolution pictures from media on 3D wide surface. Int Conf Ind Technol, 2009:1–6.
15. 10.1109/TNANO.2017.265834110.1109/TNANO.2017.2658341 ↗
16. Joo1 SJ, , Hwang HJ, , Kim HS. Highly conductive copper nanomicroparticles ink via flash light sintering for printed electronics. Nanotechnology, 2009; 25.
17. 10.1016/j.tsf.2013.11.07510.1016/j.tsf.2013.11.075 ↗
18. 10.1007/s11664-011-1711-010.1007/s11664-011-1711-0 ↗