Mechanical properties of large-scale parallel bamboo strand lumber under local compression
Source abstract
Abstract
Abstract Large-scale parallel bamboo strand lumber (PBSL) structural elements are often subjected to local compression especially in beam-to-column connections as well as in beam-to-beam connections. The current paper presents an experimental investigation on the local compression behaviour of PBSL. 20 specimens were collected from different parts of a PBSL block under radial and tangential compression loading. Load-displacement curves of all specimens were recorded and observed failure patterns were carefully investigated to understand underlying mechanics. Tangentially loaded specimens predominantly failed due to debonding of fibres triggered by deformations perpendicular to the grain. On the other hand, radially loaded specimens showed a combined failure caused by debonding in perpendicular to the grain direction as well as tensile failure of bamboo fibres in the longitudinal direction. Key design parameters such as elastic modulus, stiffness, ultimate strength and Poisson's ratio for all specimens were computed and compared against end vs middle specimens as well as radial vs tangential specimens. Radially loaded specimens showed higher load carrying capacity due to better bonding, whilst the specimens collected from the middle part of the PBSL block were relatively more ductile than the others. Analytical models for load–displacement repose as well as for stress–strain behaviour were proposed for the considered specimens. Ramberg-Osgood based stress–strain model showed good agreement with test results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bamboo properties and applications · Natural Fiber Reinforced Composites · Tree Root and Stability Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Experimental and numerical study on bending properties of heterogeneous lamella layups in cross laminated timber using Australian Radiata Pine10.1016/j.conbuildmat.2020.118525 ↗
2. Vibration test and comfort analysis of environmental and impact excitation for wooden floor structure10.15376/biores.15.4.8212-8234 ↗
3. X.F. Sun, MJ. He, Z. Li, Novel engineered wood and bamboo composites for structural applications: state-of-art of manufacturing technology and mechanical performance evaluation. 249 (2020) 118751.10.1016/j.conbuildmat.2020.118751 ↗
4. An environmental, economic and practical assessment of bamboo as a building material for supporting structures10.1016/j.conbuildmat.2005.02.023 ↗
5. X Li, M Ashraf, H Li, X Zheng, S Al-Deen, H Wang, PJ Hazell, Experimental study on the deformation and failure mechanism of parallel bamboo Strand Lumber under drop-weight penetration impact, Constr. Build. Mater. 242, 118135.10.1016/j.conbuildmat.2020.118135 ↗
6. X Li, M Ashraf, H Li, X Zheng, H Wang, S Al-Deen, PJ Hazell, An experimental investigation on Parallel Bamboo Strand Lumber specimens under quasi static and impact loading, Constr. Build. Mater. 228, 116724.10.1016/j.conbuildmat.2019.116724 ↗
7. Experimental and numerical modeling of shear behavior of laminated Guadua bamboo for different fiber directions10.1016/j.conbuildmat.2018.05.040 ↗
8. Mechanical characterization of five species of Italian bamboo10.1016/j.istruc.2019.12.022 ↗
9. H. Li, G. Chen, Q. Zhang, M. Ashraf, B. Xu, Y. Li, Mechanical properties of laminated bamboo lumber column under radial eccentric compression, Constr. Build. Mater. 121, 644-652.10.1016/j.conbuildmat.2016.06.031 ↗
10. Recent developments in bamboo fiber-based composites: A review10.1007/s00289-018-2493-9 ↗
11. Research and engineering application progress of laminated bamboo structure
12. Experimental dynamic characterization of a new composite glubam-steel truss structure
13. Relationship of structure and stiffness in laminated bamboo composites10.1016/j.conbuildmat.2017.12.166 ↗
14. Resistance of bamboo scrimber against white-rot and brown-rot fungi10.1080/17480272.2018.1475420 ↗
15. Fracture of parallel strand bamboo composite under mode I loading: DCB test investigation
16. A low-technology approach toward fabrication of laminated bamboo lumber10.1016/j.conbuildmat.2011.10.046 ↗
17. Stiffness and strength analysis of four layered laminate bamboo composite at macroscopic scale10.1016/j.compositesb.2012.07.048 ↗
18. Experimental evaluation of physical and mechanical properties of Glued Laminated Guadua angustifolia Kunth10.1016/j.conbuildmat.2014.09.056 ↗
19. Structural performance of glued laminated bamboo beams10.1061/(ASCE)ST.1943-541X.0000807 ↗
20. Mechanical behavior of laminated bamboo lumber for structural application: an experimental investigation10.1007/s00107-019-01486-9 ↗
21. Experimental study on the mechanical behavior of BFRP-bamboo composite beam10.1177/0963693519867335 ↗
22. Adhesion performance comparison of structural bamboo scrimber with two kinds of resin
23. Sustainable material: Development experiment of bamboo composite through biologically binding mechanism10.1088/1757-899X/713/1/012010 ↗
24. Preparation, physical, mechanical, and interfacial morphological properties of engineered bamboo scrimber10.1016/j.conbuildmat.2017.09.185 ↗
25. Engineered bamboo scrimber: Influence of density on the mechanical and water absorption properties10.1016/j.conbuildmat.2016.10.069 ↗
26. Mechanical properties and stress strain relationship models for bamboo scrimber10.32604/jrm.2020.09341 ↗
27. Compression behaviors of parallel bamboo strand lumber under static loading10.32604/jrm.2019.07592 ↗
28. Engineered bamboo for structural applications10.1016/j.conbuildmat.2015.01.077 ↗
29. Strength models of bamboo scrimber for compressive properties10.1007/s10086-014-1444-9 ↗
30. Effects of heat treatment on the properties of bamboo scrimber10.1007/s10086-016-1574-3 ↗
31. Development of structural composite products made from bamboo I: fundamental properties of bamboo zephyr board10.1007/BF00779556 ↗
32. Development of structural composite products made from bamboo II: fundamental properties of laminated bamboo lumber10.1007/BF01171228 ↗
33. Effects of temperature on the compressive strength parallel to the grain of bamboo scrimbe10.3390/ma9060436 ↗
34. Experimental study on compressive and tensile properties of a bamboo scrimber at elevated temperatures10.1016/j.conbuildmat.2017.06.128 ↗
35. Physical and mechanical properties of oriented strand lumber made from an Asian bamboo (Dendrocalamus asper Backer)10.1007/s00107-009-0394-1 ↗
36. Experiments on partial compression bearing capacity parallel to the grain of bamboo strand scrimber
37. Experiments of partial compression bearing capacity perpendicular to the grain of bamboo scrimber
38. Behavior and strength of rectangular bamboo scrimber columns with shape and slenderness effects
39. Flexural behavior of bamboo–concrete composite beams with perforated steel plate connections
40. Finger joint performance of structural laminated bamboo member10.1007/s10086-011-1233-7 ↗
41. Ramberg · 1943
42. M. Ashraf, B. Young, Design formulations for non-welded and welded aluminium columns using Continuous Strength Method, Eng. Struct. 33 (12), 3197-3207.10.1016/j.engstruct.2011.07.027 ↗
43. L. Gardner, M. Ashraf, Structural design for non-linear metallic materials, Eng. Struct. 28 (6), 926-934.10.1016/j.engstruct.2005.11.001 ↗