journal article·2021-02

Behaviour of concrete specimens retrofitted with bio-based polyurethane coatings under dynamic loads

H.M.C.C. Somarathna, S.N. Raman, D. Mohotti, A.A. Mutalib, K.H. Badri

Publisher page

Abstract

Abstract Experimental investigation was conducted using concrete specimens to assess the effectiveness of bio-based polyurethane (PU) coating synthesized from palm kernel oil in enhancing the dynamic mechanical response of concrete specimens under quasi-static and dynamic loads. The dynamic loading condition was simulated by conducting three-point bending tests at a strain rate of 0.067 s−1, and simultaneously, under quasi-static loading (strain rate of 0.00033 s−1) conditions. The application of PU layer(s) (either on the impact face, rear face, or on both faces of the concrete specimens) increases the dynamic resistance of the concrete element, which can be enhanced by increasing coating thickness on either face of the concrete element. Under dynamic conditions, with 10% of total coating thickness compared to the beam depth, strain during ultimate failure, and strain energy density were enhanced significantly with marginal enhancement in the ultimate flexural strength. PU coating does not debond during ultimate failure of the test specimens which implies good adhesion characteristics, and even with minimum coating thickness (2.5%), drastic fragmentation effects can be reduced. Bio-based PU is a green material and application of PU coating provides a viable and sustainable technique for protecting concrete structures against dynamic loads.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Applications in Construction Materials · Polymer composites and self-healing · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Krauthammer · 2008
2. D. Cormie, G. Mays, P. Smith, Blast Effects on Buildings, Third Edition, ICE Publishing, 2019. doi:10.1680/beob.61477.10.1680/beob.61477 ↗
3. Elastomeric polymers for blast and ballistic retrofitting of structures10.11113/jt.v76.3608 ↗
4. Low velocity impact response of reinforced concrete beams: Experimental and numerical investigation10.1260/2041-4196.6.1.81 ↗
5. Raman · 2011
6. FLEXURAL REINFORCED CONCRETE MEMBERS WITH MINIMUM REINFORCEMENT UNDER LOW-VELOCITY IMPACT LOAD10.21660/2018.46.STR107 ↗
7. Recent advances in basalt-fiber-reinforced composites: Tailoring the fiber-matrix interface10.1016/j.compositesb.2020.108011 ↗
8. Fiber-reinforced polymer composites in strengthening reinforced concrete structures: A critical review10.1016/j.engstruct.2019.109542 ↗
9. Experimental and nonlinear finite element studies of RC beams strengthened with FRP plates10.1016/j.compositesb.2005.12.003 ↗
10. Flexural behaviour of concrete beams reinforced with di ff erent grade steel and strengthened by CFRP strips10.1016/j.compositesb.2019.02.056 ↗
11. Seismic retro fi tting of RC walls externally strengthened by fl ax e FRP strips10.1016/j.compositesb.2017.06.017 ↗
12. Numerical evaluation of blast resistance of RC slab strengthened with AFRP10.1016/j.conbuildmat.2018.05.081 ↗
13. Blast response of GFRP-strengthened infill masonry walls10.1016/j.conbuildmat.2016.04.053 ↗
14. Low-velocity impact behaviour of two way RC slab strengthening with CFRP strips10.1016/j.conbuildmat.2018.08.027 ↗
15. CFRP strengthened RC beams subjected to impact loading10.1016/j.proeng.2017.11.063 ↗
16. Impact behaviour of carbon fibre reinforced polymer (CFRP) strengthened square hollow steel tubes: A numerical simulation10.1016/j.tws.2018.06.033 ↗
17. Investigation of concrete-filled steel tube beams strengthened with CFRP against impact loads10.1016/j.compstruct.2018.09.057 ↗
18. Review of concrete structures strengthened with FRP against impact loading10.1016/j.istruc.2016.05.003 ↗
19. Strengthening steel bridge sections using CFRP laminates10.1016/S1359-8368(01)00006-3 ↗
20. Experimental and numerical investigations on the impact resistance of SHCC-strengthened RC slabs subjected to drop weight loading10.1016/j.conbuildmat.2019.116866 ↗
21. Experimental and numerical study on low-velocity lateral impact behaviors of RC, UHPFRC and UHPFRC-strengthened columns10.1016/j.engstruct.2019.04.086 ↗
22. Dynamic assessment of innovative retro fi t techniques for masonry buildings10.1016/j.compositesb.2018.04.038 ↗
23. Experimental study on flexural behavior of damaged reinforced concrete (RC) beam strengthened by toughness-improved ultra-high performance concrete (UHPC) layer10.1016/j.compositesb.2020.107834 ↗
24. Investigation of low-velocity impact behaviors of foamed concrete material10.1016/j.compositesb.2019.01.021 ↗
25. The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art review10.1016/j.conbuildmat.2018.09.166 ↗
26. S.N. Raman, T. Pham, T. Ngo, P. Mendis, Experimental Investigation on the Behaviour of RC Panels Retrofitted with Polymer Coatings under Blast Effects, in: Proc. 2nd Int. Conf. Sustain. Built Environ., Kandy, Sri Lanka, 2012: p. 14 pgs.
27. Rate dependent tensile behavior of polyurethane under varying strain rates10.1016/j.conbuildmat.2020.119203 ↗
28. Polyurea coated composite aluminium plates subjected to high velocity projectile impact10.1016/j.matdes.2013.05.060 ↗
29. Explosive testing of polymer retrofit masonry walls10.1061/(ASCE)0887-3828(2004)18:2(100) ↗
30. Studying a flexible polyurethane elastomer with improved impact-resistant performance10.3390/polym11030467 ↗
31. Synthesis and characterization of transparent and high impact resistance polyurethane coatings based on polyester polyols and isocyanate trimers10.1016/j.porgcoat.2012.05.005 ↗
32. H.M.C.C. Somarathna, S.N. Raman, A.A. Mutalib, K.H. Badri, Tensile Behavior of Polyurethane under Low to Intermediate Strain Rates, in: 13th Int. Conf. Concr. Eng. Technol. 2016, Selangor, Malaysia, 2016: p. 6 pgs.
33. Plastic deformation of polyurea coated composite aluminium plates subjected to low velocity impact10.1016/j.matdes.2013.11.063 ↗
34. J.S. Davidson, S. Sudame, DEVELOPMENT OF COMPUTATIONAL MODELS AND INPUT SENSITIVITY STUDY OF POLYMER REINFORCED CONCRETE MASONRY WALLS SUBJECTED TO BLAST, 140 Hoehn Building, 1075 13th Street South Birmingham, AL 35294-4440, 2004.
35. Failure Mechanisms of Polymer-Reinforced Concrete Masonry Walls Subjected to Blast10.1061/(ASCE)0733-9445(2005)131:8(1194) ↗
36. Effects of elastoplastic strengthening of gravel soil on rockfall impact force and penetration depth10.1016/j.ijimpeng.2019.103411 ↗
37. Mechanical performance and shear constitutive model study of a new high-capacity polyurethane elastomeric bearing10.1016/j.conbuildmat.2019.117227 ↗
38. Improving damping property of carbon-fiber reinforced epoxy composite through novel hybrid epoxy-polyurea interfacial reaction10.1016/j.compositesb.2019.01.064 ↗
39. Enhancement of blast resistance of sandwich plates10.1016/j.compositesb.2007.02.006 ↗
40. Deformation mechanism and failure-tolerant characteristics of polymer-coated sheet metal
41. Investigation of effect of polyurea on response of steel plates to impulsive loads in direct pressure-pulse experiments10.1016/j.mechmat.2009.09.008 ↗
42. Experimental investigation of response of monolithic and bilayer plates to impulsive loads10.1016/j.ijimpeng.2009.04.002 ↗
43. Deformation of polyurea-coated steel plates under localised blast loading10.1016/j.ijimpeng.2012.08.005 ↗
44. The role of adhesive in the ballistic/structural performance of ceramic/polymer–matrix composite hybrid armor10.1016/j.matdes.2012.05.023 ↗
45. M.S. Hoo Fatt, X. Ouyang, R.J. Dinan, Blast Response of Walls Retrofitted with Elastomer Coatings., in: Struct. under Shock Impact VIII Proc. 8th Int. Conf. Struct. under Shock Impact., Crete, Greece, 2004: pp. 129–138.
46. Blast response of lightly attached concrete masonry unit walls10.1061/(ASCE)0733-9445(2005)131:8(1186) ↗
47. T. Hrynyk, J.J. Myers, Comparing slenderness effects on the out-of-plane behavior of URM infills using modern retrofits, in: Fourth Int. Conf. FRP Compos. Civ. Eng., Zurich, Switzerland, 2008: pp. 22–24.
48. Blast response of polymer-retrofitted masonry unit walls10.1016/j.compositesb.2016.02.044 ↗
49. Out-of-plane impact resistance of aluminium plates subjected to low velocity impacts10.1016/j.matdes.2013.03.023 ↗
50. Mechanics of Materials Penetration of DH-36 steel plates with and without polyurea coating10.1016/j.mechmat.2010.08.004 ↗
51. Influence of polyurea composite coating on selected mechanical properties of AISI 304 steel10.3390/ma12193137 ↗
52. Wave propagation and dispersion in sandwich plates subjected to blast loads10.1080/15376490701298975 ↗
53. Impact and blast resistance of sandwich plates, major accompl
54. A review on dynamic mechanical properties of natural fibre reinforced polymer composites10.1016/j.conbuildmat.2015.12.075 ↗
55. Bio-inspired platelet reinforced elastomeric-ceramic composites for impact and high strain rate applications10.1016/j.compscitech.2019.107857 ↗
56. S.N. Raman, M. Jamil, T. Ngo, P. Mendis, T. Pham, Retrofitting of RC panels subjected to blast effects using elastomeric polymer coatings, in: Concr. Solut. - Proc. Concr. Solut. 5th Int. Conf. Concr. Repair, Belfast, Northern Ireland, 2014: pp. 353–360. doi:10.1201/b17394-55.10.1201/b17394-55 ↗
57. Monotonic and fatigue performance of RC beams strengthened with a polyurea coating system10.1016/j.conbuildmat.2015.10.020 ↗
58. Protective polyurea coatings for enhanced blast survivability of concrete10.1016/j.conbuildmat.2018.04.204 ↗
59. Quasi-static behavior of palm-based elastomeric polyurethane: for strengthening application of Structures under impulsive loadings10.3390/polym8050202 ↗
60. Hyper-viscoelastic constitutive models for predicting the material behavior of polyurethane under varying strain rates and uniaxial tensile loading10.1016/j.conbuildmat.2019.117417 ↗
61. H.M.C.C. Somarathna, S.N. Raman, A.A. Mutalib, K.H. Badri, Analysis of Strain Rate Dependent Tensile Behaviour of Polyurethanes, in: Proc. Int. Conf. Struct. Eng. Constr. Manag., Kandy, Sri Lanka, 2015: p. 7 pgs.
62. H.M.C.C. Somarathna, S.N. Raman, A.A. Mutalib, K.H. Badri, Mechanical Characterization of Polyurethane Elastomers: For Retrofitting Application against Blast Effects, in: Proceedins Third Conf. Smart Monit. Assess. Rehabil. Struct. (SMAR 2015), Antalya, Turkey, 2015: pp. 82–89.
63. S.N. Raman, H.M.C.C. Somarathna, A.A. Mutalib, K.H. Badri, M.R. Taha, Bio-Based Polyurethane Elastomer for Strengthening Application of Concrete Structures Under Dynamic Loadings, in: Int. Congr. Polym. Concr. (ICPIC 2018), Springer International Publishing, Cham, 2018: pp. 751–757. doi:10.1007/978-3-319-78175-4_96.10.1007/978-3-319-78175-4_96 ↗
64. Elastomeric polyurethane for retrofitting application of concrete structures under dynamic loadings
65. American Concrete Institute, Concrete Mix Design Full Peocedure ACI 211, United States, 2002.
66. ASTMC39, ASTM C-39, in: Stand. Test Method Compressive Strength Cylind. Concr. Specimens, ASTM International, West Conshohocken, PA, 2014. www.astm.org.
67. Biobased polyurethane from palm kernel oil-based polyol
68. ASTM C293/C293M - 16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading), in: ASTM Int., West Conshohocken, PA, 2016. www.astm.org.
69. State-of-the-art review on low-velocity impact response of reinforced concrete beams
70. Johansson · 2000
71. Strain-rate-sensitive constitutive law for concrete
72. R.C. Hibbeler, Mechanics of Materials, Pearson-Prentice Hall: Singapore, 2011. doi:10.1017/CBO9781107415324.004.10.1017/CBO9781107415324.004 ↗
73. Experimental investigation on the tensile behavior of polyurea at high strain rates10.1016/j.matdes.2013.02.063 ↗