Feasibility and economic evaluation of grouting materials containing binary and ternary industrial waste
Source abstract
Abstract
Abstract In this study, the feasibility and environmental impact of using zeolite powder (ZP), basalt powder (BP), and unprocessed coarse fly ash (UFA) as grouting materials were evaluated. The rheological properties, workability, and compressive strengths of cementitious systems containing cement, ZP, BP, and UFA were tested, and three-parameter models were used to characterize the relationships between these properties. The resource consumption, electricity consumption, and greenhouse (CO2) and pollution (PM, SO2, and NOx) gas emissions of different grout formulations were evaluated by combining life cycle assessment (LCA) and economic cost assessment. The results showed that the incorporation of ZP, BP, or UFA improved the cohesiveness and bleeding rate of the grout. Some formulas had adverse effects on the rheology and compressive strength. The ternary blends of these mineral admixtures effectively solved this problem. In particular, the blends of BP and UFA not only retained cohesiveness and segregation resistances but also exhibited good rheological properties and compressive strengths. LCA and the economic evaluation indicated that the utilization of ZP and BP reduced the resource and electricity consumption, harmful gas emissions, and economic costs. Among them, BP’s annual production and mining costs were better than those of ZP. The production of UFA had a negative impact on resource consumption and environmental pollution but had the best economic effect among the three waste materials. A blend with 10% BP and 10% UFA was the optimal combination, which could simultaneously meet the requirements of the grouting performance and economic cost.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Grouting, Rheology, and Soil Mechanics · Microbial Applications in Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. Prevention and treatment technologies of railway tunnel water inrush and mud gushing in China10.1016/j.jrmge.2013.07.009 ↗
2. Comprehensive service properties evaluation of composite grouting materials with high-performance cement paste for semi-flexible pavement10.1016/j.conbuildmat.2017.07.122 ↗
3. A numerical study of the effect of soil and grout material properties and cover depth in shield tunnelling10.1016/j.compgeo.2006.04.004 ↗
4. Experimental investigation on properties of gypsum-quicklime-soil grout material in the reparation of earthen site cracks10.1016/j.conbuildmat.2017.08.180 ↗
5. Formulation and performance of grouting materials for underwater shield tunnel construction in karst ground10.1016/j.conbuildmat.2018.07.054 ↗
6. RSM-based modeling and optimization of self-consolidating mortar to predict acceptable ranges of rheological properties10.1016/j.conbuildmat.2018.09.019 ↗
7. Influence of saturated activated carbon on the rheological and mechanical properties of cementitious materials10.1016/j.conbuildmat.2018.11.257 ↗
8. Numerical and experimental investigation of pillar reinforcement with pressurized grouting and pre-stress10.1016/j.tust.2015.10.018 ↗
9. Effects of CSF on strength, rheology and cohesiveness of cement paste10.1016/j.conbuildmat.2012.04.037 ↗
10. The scope for better industry representation in long-term energy models: Modeling the cement industry10.1016/j.apenergy.2019.01.252 ↗
11. Evaluating co-benefits of energy efficiency and air pollution abatement in China’s cement industry10.1016/j.apenergy.2015.02.081 ↗
12. A huge number of artificial waste material can be supplementary cementitious material (SCM) for concrete production – a review part II10.1016/j.jclepro.2015.12.115 ↗
13. Effectiveness of sewage sludge ash combined with waste pozzolanic minerals in developing sustainable construction material: An alternative approach for waste management10.1016/j.jclepro.2017.03.059 ↗
14. Evolution and projection of CO2 emissions for China's cement industry from 1980 to 202010.1016/j.rser.2017.02.006 ↗
15. A review on fly ash characteristics – towards promoting high volume utilization in developing sustainable concrete10.1016/j.jclepro.2017.01.114 ↗
16. Effect of incorporation of high volume of recycled concrete aggregates and fly ash on the strength and global warming potential of concrete10.1016/j.jclepro.2017.07.236 ↗
17. On the rheology of using geopolymer for grouting: a comparative study with cement-based grout included fly ash and cold bonded fly ash10.1016/j.conbuildmat.2018.11.140 ↗
18. Effect of different gypsums on the workability and mechanical properties of red mud-slag based grouting materials10.1016/j.jclepro.2019.118759 ↗
19. Effect of limestone on rheological, shrinkage and mechanical properties of alkali – activated slag/fly ash grouting materials10.1016/j.conbuildmat.2018.09.209 ↗
20. Environmental evaluation of green concretes versus conventional concrete by means of LCA10.1016/j.wasman.2015.06.035 ↗
21. Recent advances in understanding the role of supplementary cementitious materials in concrete10.1016/j.cemconres.2015.03.018 ↗
22. Multifunctional lightweight aggregate containing phase change material and water for damage mitigation of concrete10.30919/esmm5f606 ↗
23. Hydration of binary Portland cement blends containing silica fume: a decoupling method to estimate degrees of hydration and Pozzolanic reaction10.3389/fmats.2019.00078 ↗
24. Use of natural zeolite as a supplementary cementitious material10.1016/j.cemconcomp.2009.10.006 ↗
25. The effect of acid treatment on the reactivity of natural zeolites used as supplementary cementitious materials10.1016/j.cemconres.2015.08.007 ↗
26. Strength and durability effect of modified zeolite additive on concrete properties10.1016/j.conbuildmat.2009.10.033 ↗
27. Properties of cement mortars containing clinoptilolite as a supplementary cementitious material10.1016/j.conbuildmat.2011.02.006 ↗
28. The influence of zeolite and powdered Bayburt stones on the water transport kinetics and mechanical properties of hydrated lime mortars10.1016/j.conbuildmat.2015.08.118 ↗
29. Influence of pumice and zeolite on compressive strength, transport properties and resistance to chloride penetration of high strength self-compacting concretes10.1016/j.conbuildmat.2017.06.071 ↗
30. Suitability of alkali activated slag/fly ash (AA-GGBS/FA) concretes for chloride environments: characterisation based on mix design and compliance testing10.1016/j.conbuildmat.2019.05.043 ↗
31. Effect of grinding on early age performance of high volume fly ash ternary blended pastes with CKD & OPC10.1016/j.conbuildmat.2017.01.044 ↗
32. Use of gypsum and CKD to enhance early age strength of High Volume Fly Ash (HVFA) pastes10.1016/j.conbuildmat.2014.08.015 ↗
33. Factors influencing the compressive strength of fly ash based geopolymers10.1016/j.conbuildmat.2015.11.045 ↗
34. Strength development of GGBS and fly ash concretes and applicability of fib model code’s maturity function – a critical review10.1016/j.conbuildmat.2017.12.054 ↗
35. Use of fly-ash slurry in backfill grouting in coal mines10.1016/j.heliyon.2017.e00470 ↗
36. Fly ash effects: I. The morphological effect of fly ash10.1016/S0008-8846(03)00217-5 ↗
37. Hybrid fiber reinforced self-compacting concrete with a high-volume coarse fly ash10.1016/j.conbuildmat.2005.06.032 ↗
38. Durability of concrete made with natural granular granite, silica sand and powders of waste marble and basalt as fine aggregate10.1016/j.jobe.2018.04.022 ↗
39. Mechanical properties and interfacial transition zone microstructure of concrete with waste basalt powder addition10.1016/j.conbuildmat.2018.05.133 ↗
40. Evaluation of selected basalts from the point of alkali–silica reactivity. Cement and Concrete
41. Investigating the influence of basalt as mineral admixture on hydration and microstructure formation mechanism of cement10.1016/j.conbuildmat.2013.07.021 ↗
42. Effect of coarse basalt aggregates on the properties of Ultra-high Performance Concrete (UHPC)10.1016/j.conbuildmat.2018.03.109 ↗
43. The effect of basalt powder on the properties of cement composites10.1016/j.proeng.2013.09.010 ↗
44. Utilization potential of fly ash and copper tailings in concrete as partial replacement of cement along with life cycle assessment10.1016/j.wasman.2019.08.036 ↗
45. Environmental impacts, life cycle assessment and potential improvement measures for cement production: a literature review10.1016/j.jclepro.2015.11.078 ↗
46. Benefit-cost analysis model of using class F fly ash-based green cement in masonry units10.1016/j.jclepro.2018.06.229 ↗
47. Life cycle sustainability assessment of fly ash concrete structures10.1016/j.rser.2017.05.232 ↗
48. Quantitative analysis of fly ash in hardened cement paste10.1016/j.conbuildmat.2017.07.106 ↗
49. Self-compacting concrete10.3151/jact.1.5 ↗
50. A high thermal conductivity cement for geothermal exploitation application10.1007/s11053-020-09694-4 ↗
51. Effects of superfine zeolite on strength, flowability and cohesiveness of cementitious paste10.1016/j.cemconcomp.2017.06.010 ↗
52. Effects of chemicals and blending petroleum coke on the properties of low-rank Indonesian coal water mixtures10.1016/j.fuproc.2007.11.026 ↗
53. Effect of particle size distribution of petroleum coke on the properties of petroleum coke–oil slurry10.1016/j.fuel.2011.03.029 ↗
54. Effects and threshold of water film thickness on multi-mineral cement paste10.1016/j.cemconcomp.2020.103677 ↗
55. Adding fly ash microsphere to improve packing density, flowability and strength of cement paste10.1016/j.powtec.2012.09.016 ↗
56. National Bureau of Statistics of China. China Statistical Yearbook. 2015.
57. China Cement Association. China Cement Almanac. 2015.
58. National Bureau of Statistics of China. China Energy Statistical Yearbook. 2015.
59. National Bureau of Statistics of China. China Statistical Yearbook of Environment. 2015.
60. Ministry of Land and Resources of China. China Land and Resources Statistical Yearbook. 2004-2015.
61. Quantifying the impacts of decarbonisation in China’s cement sector: a perspective from an integrated assessment approach10.1016/j.apenergy.2015.12.112 ↗
62. Exploring the driving forces of energy consumption and environmental pollution in China's cement industry at the provincial level10.1016/j.jclepro.2018.02.277 ↗
63. An estimation of the effect of carbon pricing for CO2 mitigation in China’s cement industry10.1016/j.apenergy.2016.10.115 ↗
64. Cutting air pollution by improving energy efficiency of China's cement industry10.1016/j.egypro.2015.12.191 ↗
65. Potential large-volume beneficial use of low-grade fly ash in magnesia-phosphate cement based materials10.1016/j.fuel.2017.08.028 ↗
66. Role of water film thickness in rheology of CSF mortar10.1016/j.cemconcomp.2010.01.005 ↗
67. Yodel: A Yield Stress Model for Suspensions10.1111/j.1551-2916.2005.00888.x ↗
68. Rheology of fiber-reinforced cementitious materials10.1016/j.cemconres.2006.10.015 ↗
69. Huixian PHZZXLSJL. Influence of marble pow der or granite pow der on rheological properties of cement paste. Concrete. 2018;No.346(1002-3550(2018)08-0092-04):92-6.
70. Yield stress and bleeding of fresh cement pastes10.1016/j.cemconres.2012.03.015 ↗
71. Effect of solid concentration and shear rate on shear-thickening response of high-performance cement suspensions10.1016/j.conbuildmat.2013.10.078 ↗
72. Bleeding and sedimentation of cement paste measured by hydrostatic pressure and Turbiscan10.1016/j.cemconcomp.2016.11.013 ↗
73. Effects of SCMs particles on the compressive strength of micro-structurally designed cement paste: Inherent characteristic effect, particle size refinement effect, and hydration effect10.1016/j.powtec.2018.01.087 ↗
74. Efficiency of mineral admixtures in mortars: quantification of the physical and chemical effects of fine admixtures in relation with compressive strength10.1016/j.cemconres.2005.07.001 ↗
75. Effects of densified silica fume on microstructure and compressive strength of blended cement pastes10.1016/S0008-8846(03)00100-5 ↗
76. The effect of productform of silica fume on its ability to control alkali – silica reaction10.1016/S0008-8846(00)00297-0 ↗
77. S. Nagataki, N. Otsuki, M. Hisada, Effects of physical and chemical treatments of silica fume on the strength and microstructures of mortar. High-Performance Concrete; Proceedings of ACI International Conference, Singapore, American Concrete Institute, Detroit, MI,1994;. 21 – 35.
78. Potential energy savings and CO2 emissions reduction of China’s cement industry10.1016/j.enpol.2012.03.036 ↗
79. The carbon emission trend and carbon mitigation path for China’s cement sector in 2020
80. Global strategies and potentials to curb CO2 emissions in cement industry10.1016/j.jclepro.2012.10.049 ↗
81. Carbon dioxide emissions from the global cement industry10.1146/annurev.energy.26.1.303 ↗
82. CO2 emissions reduction potential in China’s cement industry compared to IEA’s Cement Technology Roadmap up to 205010.1016/j.apenergy.2014.03.004 ↗
83. An inventory of primary air pollutants and CO2 emissions from cement production in China, 1990–202010.1016/j.atmosenv.2010.09.034 ↗
84. Energy consumption and CO2 emissions in China’s cement industry: a perspective from LMDI decomposition analysis10.1016/j.enpol.2012.08.038 ↗
85. The guidebook of PM2,5 emission accounting and monitoring in cement industry; 2013.
86. MEP of China. MEP announces new emission standards for major industries efforts to implement the ten major measures against air pollution; 2014.
87. Present situation and countermeasures of nitrogen oxides emissions in Chinese cement industry
88. The cement industry on the way to a low-carbon future10.1016/j.cemconres.2019.105792 ↗
89. Cement industry of China: driving force, environment impact and sustainable development10.1016/j.rser.2016.11.033 ↗