journal article·2021-03

The effect of lithium silicate impregnation on the compressive strength and pore structure of foam concrete

Zijian Song, Zhongyuan Lu, Zhenyu Lai

Publisher page

Abstract

Abstract Foam concrete (FC) has been widely used to make slab structures, retaining walls, and backfill materials for highways, railways, plazas and other projects due to its high flowability, low cement content, cost reduction, and thermal insulation. However, the low compressive strength and durability of FC limit its further application in structural materials. This paper focuses on improving the compressive strength and freeze-thaw cycle (FTC) resistance by adjusting the pore structure. The method proposed in this paper utilizes calcium silicate hydrate gel (C-S-H) formed by the rehydration reaction between lithium silicate (LS) and calcium hydroxide (CH). In this paper, the FC samples were treated by LS solution impregnation for 6 h. LS's effects on the dry density, 7- and 28-day compressive strength, strength-to-weight ratio (S/W ratio), and FTC resistance were studied. The results show that LS enhances the properties of FC, including the S/W ratio, compressive strength, and FTC resistance. In particular, the growth rate of the sample's compressive strength varies between 4.8% and 59.5%. The growth rate of the compressive S/W ratio was between 27.0% and 52.0%. The FTC resistance is improved. Thermogravimetric (TG) analysis and pore structure analysis results show that a rehydration process to generate C-S-H was observed between CH and LS, which can optimize FC's pore structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Structural characterization of hybrid fiber reinforced polymer (FRP)-autoclave aerated concrete (AAC) panels10.1177/0731684406065090 ↗
2. Experimental investigation on the compressive strength of foamed concrete: effect of curing conditions, cement type, foaming agent and dry density10.1016/j.conbuildmat.2017.12.241 ↗
3. A classification of studies on properties of foam concrete10.1016/j.cemconcomp.2009.04.006 ↗
4. Homomorphic model pavement with sub base layer of foam concrete10.1016/j.proeng.2017.06.049 ↗
5. AAC-concrete light weight precast composite floor slab10.1016/j.conbuildmat.2012.10.011 ↗
6. Statistical modeling of thermal conductivity for cement-based foam10.1016/j.jobe.2018.05.022 ↗
7. Study on properties of phase change foam concrete block mixed with paraffin / fumed silica composite phase change material10.1016/j.renene.2019.10.073 ↗
8. Wood ash as a supplementary cementing material in foams for thermal and acoustic insulation10.1016/j.conbuildmat.2019.04.174 ↗
9. Air-void size distribution of cement based foam and its effect on thermal conductivity10.1016/j.conbuildmat.2017.05.114 ↗
10. Structural performance of lightweight steel-foamed concrete–steel composite walling system under compression10.1016/j.tws.2010.08.007 ↗
11. Foam concrete as new material in road constructions10.1016/j.proeng.2016.08.585 ↗
12. The effect of porosity on the strength of foamed concrete10.1016/S0008-8846(01)00665-2 ↗
13. Properties and applications of foamed concrete; a review10.1016/j.conbuildmat.2015.10.112 ↗
14. Preliminary views on the potential of foamed concrete as a structural material10.1680/macr.2005.57.1.21 ↗
15. Effect of recycled glass fines on mechanical and durability properties of concrete foam in comparison with traditional cementitious fines10.1016/j.cemconcomp.2019.03.004 ↗
16. Application of organic- and nanoparticle-modified foams in foamed concrete: reinforcement and stabilization mechanisms10.1016/j.cemconres.2018.01.020 ↗
17. Investigate the influence of expanded clay aggregate and silica fume on the properties of lightweight concrete10.1016/j.conbuildmat.2019.05.171 ↗
18. Investigation of silica fume as foam cell stabilizer for foamed concrete10.1016/j.conbuildmat.2019.117514 ↗
19. Properties of a foamed concrete with soil as filler10.1016/j.conbuildmat.2014.11.066 ↗
20. Effect of fly ash and silica fume on hardened properties of foam concrete10.1016/j.conbuildmat.2018.11.036 ↗
21. The effect of high fly ash content on the compressive strength of foamed concrete10.1016/S0008-8846(00)00430-0 ↗
22. Utilising unprocessed low-lime coal fly ash in foamed concrete10.1016/j.fuel.2004.09.030 ↗
23. Shrinkage behavior of structural foam lightweight concrete containing glycol compounds and fly ash10.1016/j.matdes.2010.07.036 ↗
24. Influence of coarse fly ash on the performance of foam concrete and its application in high-speed railway roadbeds10.1016/j.conbuildmat.2018.02.207 ↗
25. Investigation of the properties of high-porosity cement foams based on ternary Portland cement–metakaolin–silica fume blends10.1016/j.conbuildmat.2015.12.190 ↗
26. Microstructure of high-strength foam concrete10.1016/j.matchar.2008.12.011 ↗
27. The effects of pozzolanic powder on foam concrete pore structure and frost resistance10.1016/j.conbuildmat.2019.02.021 ↗
28. Compressive and flexural strength of fiber-reinforced foamed concrete: effect of fiber content, curing conditions and dry density10.1016/j.conbuildmat.2018.11.197 ↗
29. The influence of addition of treated kenaf fibre in the production and properties of fibre reinforced foamed composite10.1016/j.conbuildmat.2018.05.169 ↗
30. Properties of foamed concrete reinforced with hybrid fibres10.1051/matecconf/201816202012 ↗
31. Influence of surface treatment of recycled aggregates on mechanical properties and bond strength of self-compacting concrete10.3390/su11154182 ↗
32. Characterization of silicate sealers on concrete10.1016/S0008-8846(97)00167-1 ↗
33. An approach to characterize the wearability of concrete pavement surface treatments10.1177/0361198118821668 ↗
34. Influence of lithium sulfate addition on the properties of Portland cement paste10.1016/j.conbuildmat.2013.09.058 ↗
35. Acceleration of Portland cement with lithium, sodium and potassium silicates and hydroxides10.1016/j.matchemphys.2019.122608 ↗
36. Influence of barium and lithium compounds on silica autoclaved materials properties and on the microstructure10.1016/j.jclepro.2019.06.338 ↗
37. G.B.R. Kumar, V.R. Narayanan, A review on polymer impregnated concrete using steel wire mesh, Mater. Today: Proc. 33 part 1 (2020) 338–344.10.1016/j.matpr.2020.04.118 ↗
38. Mechanical properties and durability of PMMA impregnated mortar10.1007/s11814-009-0346-9 ↗
39. Experimental and numerical investigation of influence of air-voids on the compressive behaviour of foamed concrete10.1016/j.matdes.2017.05.054 ↗
40. Effects of expanded polystyrene (EPS) particles on fire resistance, thermal conductivity and compressive strength of foamed concrete10.1016/j.conbuildmat.2016.02.218 ↗
41. S. Mindess, J.F. Young, D. Darwin, Concrete (2005).
42. Frost action in cement in the presence of De-Icers10.1016/0008-8846(76)90097-1 ↗
43. P.K. Metha, P.J.M. Monterio, Concrete microstructure, properties and materials (2001).
44. Investigation on early hydration of ternary Portland cement-blast-furnace slag–metakaolin blends10.1016/j.conbuildmat.2014.04.018 ↗
45. Thermal analysis and microstructure of Portland cement-fly ash-silica fume pastes10.1007/s10973-009-0403-y ↗
46. Microstructural, physical, and thermal analyses of Portland cement–fly ash–calcium hydroxide blended pastes10.1007/s10973-009-0491-8 ↗
47. Thermal behaviour and characterization of cement composites with burnt kaolin sand10.1007/s10973-011-1964-0 ↗