Interfacial adhesive property in “asphalt mixture-PMA copolymer-steel plate” system: Experimental and molecular dynamics simulation
Source abstract
Abstract
Abstract In this article, poly(methyl methacrylate/n-butyl acrylate) copolymer (PMA) is being considered for utilizing as a waterproof adhesive layer (WAL) on the steel bridge deck. Toughness modification of methacrylate-based adhesive (MMA) was carried out by adding n-butyl acrylate (nBA) using the emulsion polymerization method to overcome its brittleness. The “Asphalt mixture-MMA-Steel plate” interfacial morphology was analyzed by SEM. The MMA and asphalt mortar play the main role at the WAL-asphalt mixture bonding interface was proved by microscopic characteristic analyses. Besides, molecular dynamics (MD) simulation has been used for the construction of atomistic models of PMA with different molar ratios. The adjacent interface adhesion properties of “Asphalt- PMA-Steel plate” connection has been investigated by calculating the interaction energy. The simulated results show that 50/50 PMA has good adhesion bonding between copolymer to steel plate/ asphalt surface. The van der Waals (vdW) force played an essential role in interfacial adhesive properties. The bonding between the steel plate and the PMA copolymer layer within the three-layer structure is comparatively more stable than that of the interface between the PMA layer and the asphalt layer. Differential scanning calorimetry (DSC) test results confirmed the toughness effect of nBA that increases the slippage of PMMA chains past each other and resulted in a decrease of Tg. The pull-off and direct shear test evidenced that the PMA rather than MMA has better compatibility with epoxy asphalt concrete (EA) in both room or high-temperature zones. This work aims to study the adhesion properties between steel plate/asphalt and PMA at multi-scale and provide guidance and reference for researchers to design and develop a new waterproof layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Experimental study of the performance of a stress-absorbing waterproof layer for use in asphalt pavements on bridge decks10.1016/j.conbuildmat.2020.119290 ↗
2. Establishment of a new approach to optimized selection of steel bridge deck waterproof bonding materials composite system10.1016/j.conbuildmat.2020.120269 ↗
3. Evaluation of bridge deck wearing surfaces and protective systems
4. European Asphalt Pavement Association · 2013
5. Thermal and mechanical properties of natural fibrous nanoclay reinforced epoxy asphalt adhesives10.1016/j.ijadhadh.2018.07.005 ↗
6. A molecular dynamics simulation study of the viscoelastic properties of polymer nanocomposites10.1063/1.1516589 ↗
7. Viscoelastic properties of polymer-grafted nanoparticle composites from molecular dynamics simulations10.1021/ma502086c ↗
8. Molecular dynamics study of the reinforcement effect of graphene in multilayered polymer nanocomposites10.1016/j.matdes.2017.03.052 ↗
9. A molecular dynamics simulation study on enhancement of mechanical and tribological properties of polymer composites by introduction of graphene10.1016/j.carbon.2016.10.039 ↗
10. Molecular dynamics simulation of carbon nanotube pull-out from polyethylene matrix10.1016/j.compscitech.2017.03.029 ↗
11. Graphene/poly(ethylene glycol) nanocomposites as studied by molecular dynamics simulations10.1016/j.matdes.2016.02.078 ↗
12. Prediction of thermodynamic properties of organic mixtures: Combining molecular simulations with classical thermodynamics10.1016/j.fluid.2020.112759 ↗
13. M. Cetin, Chapter 27: Landscape Engineering, Protecting Soil, and Runoff Storm Water, InTech-Open Science-Open Minds, Online July 1st, 2013. Book: Advances in Landscape Architecture-Environmental Sciences, ISBN 978-953-51-1167-2, 697-722 pp.
14. M. Cetin, Chapter 55: Using Recycling Materials for Sustainable Landscape Planning. Book title: Environment and Ecology at the Beginning of 21st Century, ST. Kliment Ohridski University Press, Sofia, ISBN:978-954-07-3999-1, chapter page: 783-788.
15. Consideration of permeable pavement in landscape architecture
16. The effect of atmospheric pressure plasma treatment (APPT) on the adhesive bonding of poly(methyl methacrylate) (PMMA)-to-glass using a polydimethylsiloxane (PDMS)-based adhesive10.1016/j.ijadhadh.2019.102405 ↗
17. Synthesis of High Molecular Weight Poly(n-Butyl Acrylate) Macromolecules via seATRP: From Polymer Stars to Molecular Bottlebrushes Eur
18. COMPASS: an ab initio force-field optimized for condensed-phase applications-overview with details on alkane and benzene compounds10.1021/jp980939v ↗
19. Molecular dynamics study of oxidative aging effect on asphalt binder properties10.1016/j.fuel.2016.10.021 ↗
20. Key-and-lock commodity self-healing copolymers10.1126/science.aat2975 ↗
21. Molecular dynamics study of interfacial mechanical behavior between asphalt binder and mineral aggregate10.1016/j.conbuildmat.2016.05.167 ↗
22. The applicability of the expoxy zinc-rich primer for steel bridge deck
23. Experimental and simulation study on the optimum thickness of tin interfacial layer10.3901/JME.2015.20.106 ↗
24. Molecular dynamics simulation of the bonding of cross-linked SU-8 photoresist to Ni substrate10.3724/SP.J.1105.2010.09196 ↗