Mechanical and microstructural characterization of bio-concrete prepared with optimized alternative green binders
Source abstract
Abstract
Abstract Due to their high alkaline natrure, ordinary Portland cement and lime based traditional binders show poor compatibility with the bio-aggregates. As a results, produced bio-concretes show prolonged setting time, poor mechanical and durability properties. In order to use the traditional binders in preparing the bio-concrete, the use of expensive treatment methods to improve bio-comptability of these binders become inevitable. In this regards, this research aims to solve the bio-compatibility issues of traditional binders and develop new green binders to prepare bio-concrete. In the first part, mechanical and chemical characterization (through XRD, DTG/TGA and SEM) of Portland cement (OPC), geopolymer (GP) and magnesium phosphate cement (MPC) binders was carried out. Optimized binders from each group were then further used to produce bio-concretes. In the second part, influence of type of binder and pretreament on the properties of bio-concrete was examined. It was observed that hydrophobic treatment was most efficient and increased the amount of hydration products (studied through XRD, FTIR and SEM) and bio-compatibility of OPC and GP binders. However, MPC binder was naturally compatible with the bio-aggregates due to its low pH value and do not necessarily demand any pretreatment of bio-aggregate. It was concluded that, MPC based bio-concrete shows high performance as compared to OPC and GP based bio-concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Concrete and Cement Materials Research · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. P. Huovila, Buildings and climate change: status, challenges, and opportunities, UNEP/Earthprint, 2007.
2. Buildings and climate change: Summary for decision-makers, United Nations Environ
3. O. de coopération et de développement économiques, Transition to sustainable buildings: Strategies and opportunities to 2050, OECD Publishing, 2013.
4. A review on emission analysis in cement industries10.1016/j.rser.2011.02.014 ↗
5. Global CO2 emissions from cement production, 1928–201810.5194/essd-11-1675-2019 ↗
6. Upcycling carbon dioxide to improve mechanical strength of Portland cement10.1016/j.jclepro.2018.06.120 ↗
7. Global cement production from 1990 to 2030, Stat. Res. Dep. (2019). https://www.statista.com/ statistics/373845/global-cement-production-forecast/ (accessed February 20, 2020).
8. Influence of the setting process and the formulation on the drying of hemp concrete10.1016/j.conbuildmat.2011.12.030 ↗
9. Hygrothermal and mechanical characterisation of novel hemp shiv based thermal insulation composites10.1016/j.conbuildmat.2019.04.029 ↗
10. Wood waste as an alternative thermal insulation for buildings10.1016/j.enbuild.2018.03.019 ↗
11. Preliminary study of the mechanical and hygrothermal properties of hemp-magnesium phosphate cements10.1016/j.conbuildmat.2015.12.081 ↗
12. Thermal and structural properties of a hemp–lime biocomposite10.1016/j.conbuildmat.2013.07.096 ↗
13. Influence of mineral admixtures on thermal conductivity and compressive strength of mortar10.1016/S0378-7788(02)00052-X ↗
14. The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete10.1016/S0008-8846(02)01032-3 ↗
15. A fractal approach to determine thermal conductivity in cement pastes10.1016/j.conbuildmat.2014.10.016 ↗
16. Etude des caractéristiques environnementales du chanvre par l’analyse de son cycle de vie
17. Experimental study of parameters influencing mechanical properties of hemp concretes10.1016/j.conbuildmat.2011.07.052 ↗
18. V. Cérézo, Propriétés mécaniques, thermiques et acoustiques d’un matériau à base de particules végétales: approche expérimentale et modélisation théorique, Inst. Natl. Des Sci. Appliquées, Lyon. (2005).
19. M. Sinka, L. Radina, G. Sahmenko, A. Korjakins, D. Bajare, Enhancement of lime-hemp concrete properties using different manufacturing technologies, in: First Int. Conf. Bio-Based Build. Mater., 2015: pp. 1–8.
20. C. Magniont, Contribution à la formulation et à la caractérisation d’un écomatériau de construction à base d’agroressources, (2010).
21. M. Sinka, G. Sahmenko, A. Korjakins, L. Radina, D. Bajare, Hemp Thermal Insulation Concrete with Alternative Binders, Analysis of their Thermal and Mechanical Properties, in: IOP Conf. Ser. Mater. Sci. Eng., IOP Publishing, 2015: p. 12029.10.1088/1757-899X/96/1/012029 ↗
22. R. Walker, S. Pavia, Influence of the Type of Binder on the Properties of Lime-Hemp Concrete, in: Constr. Build. Res., Springer, 2014: pp. 505–514.10.1007/978-94-007-7790-3_61 ↗
23. Studying the hardening and mechanical performances of rice husk and hemp-based building materials cured under natural and accelerated carbonation10.1016/j.conbuildmat.2015.06.032 ↗
24. Mechanical and thermal properties of lime and hemp concrete (“hempcrete”) manufactured by a projection process10.1016/j.conbuildmat.2007.07.016 ↗
25. Impact of hemp shiv on cement setting and hardening: Influence of the extracted components from the aggregates and study of the interfaces with the inorganic matrix10.1016/j.cemconcomp.2014.09.004 ↗
26. Influence of chemical treatments on surface properties and adhesion of flax fibre–polyester resin10.1016/j.compositesa.2005.10.014 ↗
27. Cement hydration inhibition with sucrose, tartaric acid, and lignosulfonate: analytical and spectroscopic study10.1021/ie060806t ↗
28. Development of a sustainable and innovant hygrothermal bio-composite featuring the enhanced mechanical properties10.1016/j.jclepro.2019.05.002 ↗
29. Multiproperty characterization of cleaner and energy-efficient vegetal concrete based on one-part geopolymer binder10.1016/j.jclepro.2019.119916 ↗
30. Utilization of industrial and hazardous waste materials to formulate energy-efficient hygrothermal bio-composites
31. Influence of type of binder and size of plant aggregate on the hygrothermal properties of bio-concrete10.1016/j.conbuildmat.2020.118981 ↗
32. Development of a new bio-composite for building insulation and structural purpose using corn stalk and magnesium phosphate cement10.1016/j.enbuild.2018.06.007 ↗
33. A. C618, Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete, in: Am. Soc. Test. Mater., West Conshohocken Pennsylvania, USA, 2008
34. ASTM, Standard specification for slag cement for use in concrete and mortars, (2014).
35. F. USDA, Grain: World Markets and Trade, World Corn Production, Consumption, and Stocks Local Marketing, 2018.
36. Influence of various chemical treatments on the composition and structure of hemp fibres10.1016/j.compositesa.2007.12.001 ↗
37. Effects of aggregate coating on the hygral properties of lignocellulosic composites10.1016/j.cemconcomp.2010.10.017 ↗
38. Amziane · 2017
39. C. ASTM, Standard test methods for time of setting of hydraulic cement by Vicat needle, C191-08. (2008).
40. A. C109, Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens), Annu. B. ASTM Stand. B. ASTM Stand. 4 (2013) 1–9.
41. Standard test method for determination of thermal conductivity of soil and soft rock by thermal needle probe procedure
42. Comparative study of composition, structure and properties of Apocynum venetum fibers under different pretreatments10.1016/j.carbpol.2006.12.028 ↗
43. Reducing setting time of blended cement paste containing high-SO3 fly ash (HSFA) using chemical/physical accelerators and by fly ash pre-washing10.1016/j.cemconcomp.2018.03.018 ↗
44. Influence of curing conditions on properties of high calcium fly ash geopolymer containing Portland cement as additive10.1016/j.matdes.2013.07.018 ↗
45. A study on the setting characteristics of sodium silicate-activated slag pastes10.1016/S0008-8846(02)01096-7 ↗
46. Improvement of early strength of fly ash-slag based one-part alkali activated mortar10.1016/j.conbuildmat.2020.118533 ↗
47. Influence of silica fume on the setting time and mechanical properties of a new magnesium phosphate cement10.1016/j.conbuildmat.2019.117544 ↗
48. Effect of surface-modified fly ash on compressive strength of cement mortar
49. Enhancement of the properties of fly ash based geopolymer paste by incorporating ground granulated blast furnace slag10.1016/j.conbuildmat.2017.04.139 ↗
50. Setting and mechanical properties of alkali-activated fly ash/slag concrete manufactured at room temperature10.1016/j.conbuildmat.2013.05.107 ↗
51. Comparative study on the effect of fiber type and content on the performance of one-part alkali-activated mortar10.1016/j.conbuildmat.2020.118221 ↗
52. Development of magnesium phosphate cements for encapsulation of radioactive waste10.1179/1743676110Y.0000000008 ↗
53. Characterisation of magnesium potassium phosphate cements blended with fly ash and ground granulated blast furnace slag10.1016/j.cemconres.2015.01.015 ↗
54. Effect of the combination of fly ash and silica fume on water resistance of Magnesium-Potassium Phosphate Cement10.1016/j.conbuildmat.2015.12.085 ↗
55. Chemically bonded phosphate ceramics: I, a dissolution model of formation10.1111/j.1151-2916.2003.tb03569.x ↗
56. Mix composition and characterisation of one-part geopolymers with different activators10.1016/j.conbuildmat.2019.07.083 ↗
57. Strength evolutions of varying water content-dredged sludge stabilized with alkali-activated ground granulated blast-furnace slag10.1016/j.conbuildmat.2020.122111 ↗
58. Fresh and hardened properties of one-part fly ash-based geopolymer binders cured at room temperature: Effect of slag and alkali activators10.1016/j.jclepro.2019.03.290 ↗
59. Durability of alkali-activated materials: Progress and perspectives10.1111/jace.12831 ↗
60. The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation10.1016/j.cemconres.2004.10.042 ↗
61. F. Qiao, Reaction mechanisms of magnesium potassium phosphate cement and its application, 2010.
62. Characterization of fly ash-cement paste and molecular structure in the presence of seawater by 27 Al and 29 Si MAS NMR spectroscopy10.1016/j.conbuildmat.2020.120823 ↗
63. The effect of fly ash fineness on heat of hydration, microstructure, flow and compressive strength of blended cement pastes
64. Development and Characterization of Fly Ash – Slag Blended Geopolymer Mortar and Lightweight Concrete10.1061/(ASCE)MT.1943-5533.0002209 ↗
65. Compressive strength and hydration of high-volume wet-grinded coal fly ash cementitious materials10.1016/j.conbuildmat.2019.02.038 ↗
66. Microstructural changes in alkali activated fly ash/slag geopolymers with sulfate exposure10.1617/s11527-012-9906-2 ↗
67. Effects of light-burnt dolomite incorporation on the setting, strength, and drying shrinkage of one-part alkali-activated slag cement10.3390/ma12182874 ↗
68. Properties of fly ash blended magnesium potassium phosphate mortars: Effect of the ratio between fly ash and magnesia10.1016/j.cemconcomp.2018.04.002 ↗
69. Dehydration characteristics of struvite-K pertaining to magnesium potassium phosphate cement system in non-isothermal condition10.1007/s10973-011-2170-9 ↗
70. Mechanical properties and durability of hemp-lime concretes10.1016/j.conbuildmat.2014.02.065 ↗
71. Moisture transfer and thermal properties of hemp–lime concretes10.1016/j.conbuildmat.2014.04.081 ↗
72. Effect of compaction on mechanical and thermal properties of hemp concrete10.1080/19648189.2010.9693246 ↗
73. S. Kioy, Lime-hemp composites: compressive strength and résistance to fungal attacks. MEng dissertation, recalled in Appendix 1: Resistance to compression and stress-strain properties, (2013).
74. Hygric properties and thermal conductivity of a new insulation material for building based on date palm concrete10.1016/j.conbuildmat.2017.08.025 ↗
75. Durability of hemp concretes exposed to accelerated environmental aging10.1016/j.conbuildmat.2020.119043 ↗
76. Impact of hemp shives aggregate mineralization on physical–mechanical properties and structure of composite with cementitious binding material10.1016/j.indcrop.2015.09.011 ↗
77. Use of magnesium oxide-cement binder in composites based on hemp shives
78. Performance of lightweight hemp concrete with alkali-activated cenosphere binders exposed to elevated temperature10.1016/j.conbuildmat.2019.07.069 ↗
79. Influence of chemical treatments of miscanthus stem fragments on polysaccharide release in the presence of cement and on the mechanical properties of bio-based concrete materials10.1016/j.cemconcomp.2019.103429 ↗
80. Thermal conductivity of hemp concretes: Variation with formulation, density and water content10.1016/j.conbuildmat.2014.05.039 ↗
81. Physico-mechanical properties of composite cement pastes containing silica fume and fly ash10.1016/j.hbrcj.2014.02.003 ↗
82. Hydration characteristics and compressive strength of hardened cement pastes containing nano-metakaolin10.1016/j.hbrcj.2014.11.008 ↗
83. G.D. Ransinchung RN, B. Kumar, Investigations on pastes and mortars of ordinary portland cement admixed with wollastonite and microsilica, J. Mater. Civ. Eng. 22 (2010) 305–313.10.1061/(ASCE)MT.1943-5533.0000019 ↗
84. Hydration and characteristics of metakaolin pozzolanic cement pastes10.1016/j.hbrcj.2015.05.005 ↗
85. Size fractionation of brown fly ash: utilisation of grey fraction as a pozzolanic material in blended cement10.1080/19648189.2018.1427635 ↗
86. Characteristics of blended cements containing nano-silica10.1016/j.hbrcj.2013.09.001 ↗
87. Utilization of GBFS in The Preparation of Low Cost Cement10.21608/ejchem.2016.1439 ↗
88. The effect of natural zeolites on the early hydration of Portland cement10.1016/S1387-1811(03)00369-X ↗
89. Novel biodegradable composites based on treated lignocellulosic waste flour as filler. Part I. Surface chemical modification and characterization of waste flour10.1016/j.compositesa.2004.11.010 ↗
90. V. Nozahic, Vers une nouvelle démarche de conception des bétons de végétaux lignocellulosiques basée sur la compréhension et l’amélioration de l’interface liant/végétal: application à des granulats de chenevotte et de tige de tournesol associés à un liant ponce/chaux, (2012).
91. Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques10.1016/j.cemconres.2009.01.017 ↗
92. The physical and chemical effects of long-term sulphuric acid exposure on hybrid modified cement mortar10.1016/j.cemconcomp.2009.02.014 ↗
93. Deterioration mechanism of cementitious materials under acid rain attack10.1016/j.engfailanal.2012.08.007 ↗
94. Fresh and Hardened Properties of Fly Ash-Slag Blended Geopolymer Paste and Mortar10.1186/s40069-019-0360-1 ↗
95. Effect of C-S-Hs-PCE and sodium sulfate on the hydration kinetics and mechanical properties of cement paste10.1016/j.conbuildmat.2020.121096 ↗
96. Partial replacement of metakaolin with red ceramic waste in geopolymer
97. How does Na, K alkali metal concentration change the early age structural characteristic of kaolin-based geopolymers10.1016/j.ceramint.2014.02.052 ↗
98. Interpreting the early-age reaction process of alkali-activated slag by using combined embedded ultrasonic measurement, thermal analysis, XRD, FTIR and SEM10.1016/j.compositesb.2020.107840 ↗
99. F.J.H.T.V. Ramos, M. de F.M. Vieira, L.G.P. Tienne, V. de Oliveira Aguiar, Evaluation and characterization of geopolymer foams synthesized from blast furnace with sodium metasilicate, J. Mater. Res. Technol. 9 (2020) 12019–12029.10.1016/j.jmrt.2020.08.019 ↗
100. Development of greener alkali-activated cement: utilisation of sodium carbonate for activating slag and fly ash mixtures10.1016/j.jclepro.2015.12.010 ↗