journal article·2021-04

Uniaxial compressive properties of ecological concrete: Experimental and three-dimensional (3D) mesoscopic investigation

Haiyan Ma, Zhangyu Wu, Jinhua Zhang, Hongfa Yu, Limin Liang

Publisher page

Abstract

Abstract In this study, the uniaxial compressive behaviors of ecological concrete were investigated using experimental and numerical methods. The uniaxial compressive test was performed on the cubic specimens with a side length of 150 mm. The three-dimensional (3D) mesoscopic model with the consideration of random shapes and sizes of aggregates was developed. The parameters considered were the aggregate-to-cementitious material ratio (A/C), the water-to-cementitious material ratio (W/C), the aggregate size, and the void content. The results indicate that the collapse of aggregate caused by the sliding failure of bonding points among aggregates is the main failure mode of ecological concrete under uniaxial compression. The void content and compressive strength of ecological concrete are associated with the A/C and W/C, and the A/C of 6 is suggested as the optimal value. The compressive stress-strain curve consists of three parts, in which the platform period represents the yield period that is relative to the compacting process. Besides, the peak stress and the peak strains in the axial- and lateral directions are related to the void content and aggregate size, and the lateral strain is obviously larger than the axial strain. Through the comparison of numerical and test results, the developed 3D mesoscale modelling approach together with the model parameters has been approved in investigating the compressive behaviors of ecological concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Landslides and related hazards · Innovations in Concrete and Construction Materials · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. The use of coarse and fine crushed bricks as aggregate in concrete10.1016/j.conbuildmat.2006.12.013 ↗
2. Reuse of waste bricks in the production line10.1016/S0360-1323(03)00140-9 ↗
3. Effects of crushed clay brick aggregate on mortar durability10.1016/j.conbuildmat.2008.09.006 ↗
4. Hansen · 1992
5. Properties of new and recycled clay brick aggregates for use in concrete10.1061/(ASCE)0899-1561(2005)17:4(456) ↗
6. A case of water absorption and water/fertilizer retention performance of super absorbent polymer modified sulphoaluminate cementitious materials10.1016/j.conbuildmat.2017.05.219 ↗
7. Effects of limestone powders on pore structure and physiological characteristics of planting concrete with sulfoaluminate cement10.1016/j.conbuildmat.2017.10.012 ↗
8. Effects of super absorbent polymer on scouring resistance and water retention performance of soil for growing plants in ecological concrete10.1016/j.ecoleng.2019.07.030 ↗
9. The effect of super absorbent polymers on soil and water conservation on the terraces of the loess plateau10.1016/j.ecoleng.2017.02.043 ↗
10. Heavy metal speciation and leaching behaviors in cement based solidified/stabilized waste materials10.1016/S0304-3894(00)00360-5 ↗
11. A multi-scale framework for modelling effective gas diffusivity in dry cement paste: Combined effects of surface, Knudsen and molecular diffusion10.1016/j.cemconres.2020.106035 ↗
12. Modelling of 3D microstructure and effective diffusivity of fly ash blended cement paste10.1016/j.cemconcomp.2020.103586 ↗
13. Numerical simulation of the mechanical behaviour of epoxy-based mortars under compressive loads10.1016/S0045-7949(02)00251-1 ↗
14. Analysis of dynamic response of concrete using a mesoscale model incorporating 3D effects10.1260/2041-4196.1.2.197 ↗
15. Dynamic size effect of concrete under tension: A numerical study10.1016/j.ijimpeng.2019.103318 ↗
16. Mesoscale modelling and analysis of damage and fragmentation of concrete slab under contact detonation10.1016/j.ijimpeng.2009.02.010 ↗
17. Mesoscale models for concrete: Homogenisation and damage behaviour10.1016/j.finel.2005.11.008 ↗
18. Random aggregate model for mesoscopic structures and mechanical analysis of fully-graded concrete10.1016/j.compstruc.2016.09.005 ↗
19. 3D numerical modelling of solid particles with randomness in shape considering convexity and concavity10.1016/j.powtec.2016.06.007 ↗
20. Experimental and three-dimensional mesoscopic investigation of coral aggregate concrete under dynamic splitting-tensile loading10.1617/s11527-020-1447-5 ↗
21. 3D mesoscopic investigation of the specimen aspect-ratio on coral aggregate concrete
22. Preparation process and properties of porous ecological concrete
23. H. Liu, Research and application of environmentally friendly green growing porous concrete. M.D. thesis. Southeast University, Nanjing 2004 (in Chinese).
24. Mechanical performance evaluation of concrete made with recycled ceramic coarse aggregates from industrial brick waste10.1016/j.conbuildmat.2018.01.052 ↗
25. Simulation and analysis of composite structures10.1016/0025-5416(85)90413-6 ↗
26. Coupling effect of strain rate and specimen size on the compressive properties of coral aggregate concrete: A 3D mesoscopic study10.1016/j.compositesb.2020.108299 ↗
27. A computational constitutive model for concrete subjected to large strains, high strain rates, and high pressures10.1115/1.4004326 ↗
28. Malvar · 1996
29. Marval LJ, Crawford JE, Morrill KB. K&C concrete material model, release. III: Automated generation of material model input. K&C Tech. Rep. TR-99-24-B1, Glendale, CA; 2000.
30. Effect of cross-sectional aspect ratio on the strength of CFRP-confined rectangular concrete columns10.1016/j.engstruct.2009.08.012 ↗