The crucial effect of re-compaction energy on the healing response of hot asphalt mortars heated by microwaves
Source abstract
Abstract
Abstract Microwave heating treatments for assisted self-healing of asphalt mixtures have been investigated over the last years. However, the only heating treatment does not permit to recover the entire original strength of the asphalt mixtures. The experimental results of this investigation show that the combination of heating and re-compacting of the pavement (thermomechanical treatment) can overcome these limitations, restoring the original tensile strength of the mixtures. During the investigation, an innovative type of mold for the gyratory compactor has been developed. The peculiarity of the mold is that it can be longitudinally opened and closed through the use of hex screw heads. Thanks to this two-parts mold, the previously broken specimen can be easily reintroduced into the mold to be subjected to new cycles of re-compaction with the kneading effect of the gyratory compactor. The experiment done in this investigation was carried out on asphalt mortars with steel fibers or electric arc furnace slag. The results showed that the additives and the re-compaction technique reduce drastically the heating energy necessary to assist self-healing of the mortars. This thermomechanical treatment could be implemented in the field by heating the deteriorated pavement with a microwave generator, and then re-compacting the pavement with a rolling compactor, which can promote the healing process thanks to its kneading action on the heated pavement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. C. Plati, A. Loizos, A method for benefiting pavement quality assurance measures related to roughness condition surveys, in Bearing Capacity of Roads, Railways and Airfields - Proceedings of the 8th International Conference on the Bearing Capacity of Roads, Railways and Airfields, 2009, vol. 1, pp. 451–458.10.1201/9780203865286.ch49 ↗
2. The effect of pavement condition on vehicle speeds and motor vehicles emissions
3. J. Qiu, “Self Healing of Asphalt Mixtures: Towards a Better Understanding of the Mechanism.” 2012.
4. Consequences of long-term infrastructure decisions – the case of self-healing roads and their CO2 emissions10.1088/1748-9326/ab424a ↗
5. Deformability, fatigue, and healing properties of asphalt mixes
6. D.N. Little, A. Bhasin, “Exploring Mechanism of Healing in Asphalt Mixtures and Quantifying its Impact,” 2007, pp. 205–218.10.1007/978-1-4020-6250-6_10 ↗
7. Self-healing of open cracks in asphalt mastic10.1016/j.fuel.2011.09.009 ↗
8. A comprehensive review on self-healing of asphalt materials: Mechanism, model, characterization and enhancement10.1016/j.cis.2018.05.003 ↗
9. Two Ways of Closing Cracks on Asphalt Concrete Pavements: Microcapsules and Induction Heating10.4028/www.scientific.net/KEM.417-418.573 ↗
10. Addressing Infrastructure Durability and Sustainability by Self Healing Mechanisms - Recent Advances in Self Healing Concrete and Asphalt
11. Heating potential of aggregates in asphalt mixtures exposed to microwaves radiation10.1016/j.conbuildmat.2019.117035 ↗
12. Evaluation of the induction healing effect of porous asphalt concrete through four point bending fatigue test10.1016/j.conbuildmat.2011.10.058 ↗
13. Self-healing of asphalt mixture by microwave and induction heating10.1016/j.matdes.2016.05.095 ↗
14. Self-healing efficiency of ferrite-filled asphalt mixture after microwave irradiation10.1016/j.conbuildmat.2017.02.145 ↗
15. Self-healing properties of ferrite-filled open-graded friction course (OGFC) asphalt mixture after moisture damage10.1016/j.jclepro.2019.05.353 ↗
16. Effect of metallic waste addition on the electrical, thermophysical and microwave crack-healing properties of asphalt mixtures10.1016/j.conbuildmat.2018.08.053 ↗
17. Induction healing of fatigue damage in asphalt test samples10.1016/j.conbuildmat.2014.10.034 ↗
18. Research on the Mechanical, Thermal, Induction Heating and Healing Properties of Steel Slag/Steel Fibers Composite Asphalt Mixture10.3390/app7101088 ↗
19. Influence of Steel Wool Fibers on the Mechanical, Termal, and Healing Properties of Dense Asphalt Concrete10.1520/JTE20130197 ↗
20. Key Factors and Optimal Conditions for Self-Healing of Bituminous Binder10.1061/(ASCE)MT.1943-5533.0002760 ↗
21. The influence of asphalt ageing on induction healing effect on porous asphalt concrete10.21809/rilemtechlett.2018.74 ↗
22. Effect of ageing and RAP content on the induction healing properties of asphalt mixtures10.1016/j.conbuildmat.2018.05.121 ↗
23. Effects of asphalt types and aging on healing performance of asphalt mixtures using induction heating method
24. Influence of Aging and Temperature on Intrinsic Healing of Asphalt Binders10.3141/2207-10 ↗
25. Heat transfer analysis of microwave hot recycling for asphalt pavement10.1049/joe.2019.1047 ↗
26. Improving microwave heating efficiency of asphalt concrete by increasing surface magnetic loss of aggregates
27. Induction heating of asphalt mastic for crack control10.1016/j.conbuildmat.2012.11.075 ↗
28. Induction healing of asphalt mastic and porous asphalt concrete10.1016/j.conbuildmat.2011.04.016 ↗
29. Induction healing of dense asphalt concrete10.1016/j.conbuildmat.2013.07.105 ↗
30. Effect of microwave heating on adhesion and moisture damage of asphalt mixtures
31. Metaxas · 1983
32. Microwave Healing Performance of Asphalt Mixture Containing Electric Arc Furnace (EAF) Slag and Graphene Nanoplatelets (GNPs)10.3390/app10041428 ↗
33. Use of additives to improve the capacity of bituminous mixtures to be heated by means of microwaves10.3989/mc.2017.00416 ↗
34. Heating asphalt mixtures with microwaves to promote self-healing10.1016/j.conbuildmat.2012.12.007 ↗
35. Self-healing performance of asphalt mixtures through heating fibers or aggregate10.1016/j.conbuildmat.2017.06.007 ↗
36. Enhanced heat release and self-healing properties of steel slag filler based asphalt materials under microwave irradiation10.1016/j.conbuildmat.2018.10.193 ↗
37. Single and multiple healing of porous and dense asphalt concrete10.1177/1045389X14529029 ↗
38. Self-Healing Analysis of Half-Warm Asphalt Mixes Containing Electric Arc Furnace (EAF) Slag and Reclaimed Asphalt Pavement (RAP) Using a Novel Thermomechanical Healing Treatment10.3390/ma13112502 ↗
39. The effect of different aging conditions and strain levels on relationship between fatigue life of asphalt binders and mixtures10.1016/j.conbuildmat.2020.118345 ↗
40. Effect of rejuvenating agents on stone matrix asphalt mixtures incorporating RAP10.1016/j.conbuildmat.2020.119298 ↗
41. Factors affecting the rutting resistance of asphalt pavement based on the field cores using multi-sequenced repeated loading test10.1016/j.conbuildmat.2020.118902 ↗
42. Effect of fibres addition on the physical and mechanical properties of asphalt mixtures with crack-healing purposes by microwave radiation10.1016/j.conbuildmat.2016.10.005 ↗
43. Effect of RAP and fibers addition on asphalt mixtures with self-healing properties gained by microwave radiation heating10.1016/j.conbuildmat.2017.10.070 ↗
44. Uniformity and mechanical properties of dense asphalt concrete with steel wool fibers10.1016/j.conbuildmat.2013.01.030 ↗
45. Effect of steel wool fibers on mechanical and induction heating response of conductive asphalt concrete10.1080/10298436.2019.1567918 ↗