Enhancement effect of the aggregate particles on the low-temperature cracking resistance of the asphalt mortar
Source abstract
Abstract
Abstract On the mesoscale, the aggregate which is a particle-reinforced material, plays an important role in improving the mechanical properties of the pavement material. To study the enhancement effect of the aggregate particles on the low-temperature crack resistance of the asphalt mortar, the asphalt mortar specimens using the aggregate with different particle sizes were formed by applying the static pressure. The indirect tensile test (IDT) was carried out to analyze the enhancement effect of the aggregate particles. Also, the pre-cracked asphalt mortar specimens prepared by the waterjet cutting technology were used for IDT. IDT was combined with the extended finite element method (XFEM) to analyze the influence of the initial configuration of the crack on the enhancement effect of the aggregate particles against the low-temperature cracking resistance and the configuration resultant force at the crack tip. It was observed that, under the low-temperature, the aggregate with different particle sizes could suppress the initiation of cracks in the asphalt mortar with different degrees. As a result, an increase in the low-temperature cracking resistance of the asphalt mortar depended on the particle size of the aggregate. The low-temperature cracking resistance of the asphalt mortar significantly decreased with an increase in the initial crack length. The aggregate could suppress such adverse effect of the initial crack length on the low-temperature cracking resistance of the asphalt mortar to a certain extent. On the other hand, as the initial deflection angle of the crack increased, the enhancement effect of the aggregate on the low-temperature cracking resistance of the asphalt mortar gradually weakened. But when the initial deflection angle was larger than 45°, this weakening trend was mitigated due to the ‘crack shielding effect’ among branch cracks.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Numerical methods in engineering · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Analysis of mineral fillers and mastics used in stone matrix asphalt[J]
2. Properties of bituminous mixtures containing different fillers[J]
3. Characterization of asphalt-filler mortars with superpave binder tests[J]
4. A. Braham, F. Ni, S. Yang. An introduction of the Arcan testing configuration for mixed-mode cracking in asphalt concrete[C]. The 11th international conference on asphalt pavements (ISAP). Nagoya Aichi, Japan. 2010.
5. Factors Study in Low-Temperature Fracture Resistance of Asphalt Concrete[J]10.1061/(ASCE)0899-1561(2010)22:2(145) ↗
6. Mixed-Mode cracking behavior of cold recycled mixes with emulsion using Arcan configuration[J]10.1016/j.conbuildmat.2013.12.079 ↗
7. Mixed mode fracture resistance of asphalt concrete mixtures[J]10.1016/j.engfracmech.2012.06.015 ↗
8. Fatigue Damage Analysis of Asphalt Mixture Specimen with Pre-made Gaps in Direct Tension Test[J]
9. Study on Fracture Theory and Crack Propagation Test of Asphalt Mixture Pre-notched Beam Based on Weight Function Method[J]
10. Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures[J]10.1016/j.conbuildmat.2015.07.165 ↗
11. The influence of natural and synthetic fibers on low temperature mixed mode I+ II fracture behavior of warm mix asphalt (WMA) materials[J]10.1016/j.engfracmech.2017.06.003 ↗
12. Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes[J]10.1111/ffe.12408 ↗
13. Laboratory study of the effect of oil-based recycling agents on high RAP asphalt mixtures[J]
14. Evaluating mode I fracture resistance in asphalt mixtures using edge notched disc bend ENDB specimen with different geometrical and environmental conditions[J]10.1016/j.engfracmech.2017.11.007 ↗
15. Low temperature fracture resistance of cement emulsified asphalt mortar under mixed mode I/III loading[J]10.1016/j.tafmec.2020.102800 ↗
16. Evaluation of temperature and loading rate effect on fracture toughness of fiber reinforced asphalt mixture using edge notched disc bend (ENDB) specimen[J]10.1016/j.conbuildmat.2019.117365 ↗
17. Properties of gap-aggregate gradation asphalt mixture and permanent deformation[J]10.1016/j.conbuildmat.2004.05.005 ↗
18. Evaluating skid resistance of different asphalt concrete mixes[J]10.1016/j.buildenv.2005.08.020 ↗
19. Dessouky S H. Multiscale approach for modeling hot mix asphalt[D]. Texas A&M University. 2005.
20. Effect of aggregate nature on the fatigue-cracking behavior of asphalt mixes[J]10.1016/j.matdes.2012.12.048 ↗
21. Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures[J]10.1016/j.conbuildmat.2013.12.097 ↗
22. Effect of Coarse Aggregate Morphologies on the Hydrodynamic Pressure-Resulted Moisture Susceptibility of Asphalt Mixtures[J]10.1061/(ASCE)MT.1943-5533.0003446 ↗
23. Study on the influence of the shape and size of coarse aggregate on the strength of concrete[J]10.1088/1757-899X/780/4/042008 ↗
24. Effect of aggregate morphologies and compaction methods on the skeleton structures in asphalt mixtures[J]10.1016/j.conbuildmat.2020.120220 ↗
25. PEI Jian-zhong, CHANG Ming-feng, CHEN Shuan-fa, et al. Numerical simulation of indirect tensile test for asphalt mixture [J]. Journal of Chang'an University(Natural Science Edition). 2010. 30(05). 6–10. (in Chinese).
26. GUO Hong-bing CHEN Shuan-fa. Numerical Analysis on Splitting Test of Open-graded Large Stone Asphalt Mixture Using Discrete Elemement Method [J]. Journal of Highway and Transportation Research and Development. 2014. 31(11). 22–26. 40. (in Chinese)
27. Discrete element analysis of the influences of aggregate properties and internal structure on fracture in asphalt mixtures[J]10.1061/(ASCE)MT.1943-5533.0000005 ↗
28. Three-dimensional discrete element models for asphalt mixtures[J]
29. Three-dimensional microstructural-based discrete element viscoelastic modeling of creep compliance tests for asphalt mixtures[J]10.1061/(ASCE)MT.1943-5533.0000038 ↗
30. Discrete element method (DEM) analyses of hot-mix asphalt (HMA) mixtures compaction and internal structure[J]10.4028/www.scientific.net/AMR.639-640.1287 ↗
31. T. Belytschko, et al. Elastic crack growth in finite elements with minimal remeshing[J]. International Journal for Numerical Methods in Engineering. 1999. 10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S ↗
32. Rubinstein, A. A. Macrocrack-Microdefect Interaction[J]. Journal of Applied Mechanics. 53(3). 505. 10.1115/1.317180310.1115/1.3171803 ↗
33. Crack surface interference: a finite element analysis[J]10.1016/S0013-7944(01)00028-5 ↗
34. Chen Y, Wang J. Simulation of crack propagation in asphalt concrete pavement at low temperature using extended finite element method[C]. Proceedings of International Workshop on Energy and Environment in the Development of Sustainable Asphalt Pavements. 2010. 420-425.
35. Numerical test of crack propagation path in asphalt beam using coupled extended finite element with field variable method[C]10.4028/www.scientific.net/AMR.250-253.2754 ↗
36. Investigation of fracture behavior of heterogeneous infrastructure materials with extended-finite-element method and image analysis[J]10.1061/(ASCE)MT.1943-5533.0000337 ↗
37. Tailored extended finite-element model for predicting crack propagation and fracture properties within idealized and digital cementitious material samples[J]
38. Du Jianhuan, Ren Dongya, Huang Yangquan, et al. Simulation of I-II mixed mode Cracking Behavior of Ultra-dense Asphalt Concrete[J]. Journal of Southwest Jiaotong University. 1-8. (in Chinese)
39. The elastic energy-momentum tensor[J]10.1007/BF00126994 ↗
40. Gurtin M E, Podio-Guidugli P. Configurational forces and the basic laws for crack propagation[J], 1995. 10.1016/0022-5096(96)00014-2.10.1016/0022-5096(96)00014-2 ↗
41. Material configurational mechanics with application to complex ddefects [J]
42. Material configurational forces applied to mixed mode crack propagation[J]10.1016/j.tafmec.2017.02.006 ↗
43. Niu Dongyu. Research on the performance of asphalt mortar and asphalt mixture with skeleton structure based on mesomechanics[D]. Chang'an University. 2015. (in Chinese).
44. Highway Science Research Institute, Ministry of Communications. Highway Engineering Asphalt and Asphalt Mixture Test Regulations: Industry Standard-Traffic. 2000: 220P. A4. (in Chinese)
45. Influence of aggregate interference on the crack propagation of asphalt concrete by the configurational force fracture criterion[J]10.1016/j.conbuildmat.2020.120293 ↗
46. Elastic crack growth in finite elements with minimal remeshing[J]10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S ↗
47. Modeling holes and inclusions by level sets in the extended finite-element method[J]10.1016/S0045-7825(01)00215-8 ↗
48. Crack behavior analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and crumb rubber[J]10.1016/j.engfracmech.2017.05.011 ↗
49. Modes I and II stress intensity factors of semi-circular bend specimen computed for two-phase aggregate/mastic asphalt mixtures[J]10.1016/j.tafmec.2019.102437 ↗
50. Interference between main cracks and microcracks at the interface[J]