journal article·2021-07Open access

Stabilization of an earthen material with Tung oil: compaction, strength and hydrophobic enhancement

H. Lin, F.Y. Liu, S.D.N. Lourenço, G. Schwantes, S. Trumpf, D. Holohan, C.T.S. Beckett

Abstract

Abstract Earthen construction generates interest due to its environmental and economic advantages such as low embodied energy, thermal comfort and low construction cost. Two challenges, namely durability and strength, hinder its application. Tung oil, a sustainable vegetable oil traditionally applied in waterproofing wooden construction, could improve the water resistance and strength of earthen materials. This study aims to detail the multiple roles and mechanisms of Tung oil as a stabilizer. Completely decomposed granite, a natural mineral soil, was selected to assess the influence of Tung oil and its time-hardening behavior on the compaction behaviour, unconfined compressive strength and hydrophobicity. Results revealed that: (1) fresh Tung oil could simultaneously increase the density of compacted soils and decrease the water required for compaction. (2) Tung oil hardened during drying, bonding soil particles and enhancing the unconfined compressive strength of the compacted soils. (3) Hydrophobicity of the stabilized soils were also enhanced, with high and persistent contact angles, which could further contribute to its durability and minimize water-induced damage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Building materials and conservation · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. The potential use of chitosan as a biopolymer additive for enhanced mechanical properties and water resistance of earthen construction10.1016/j.conbuildmat.2016.03.218 ↗
2. On the drying behavior of natural oils used for solid wood finishing
3. Weathering’s beneficial effect on waste-stabilised rammed earth: a chemical and microstructural investigation10.1016/j.conbuildmat.2017.02.009 ↗
4. Modified sessile drop method for assessing initial soil–water contact angle of sandy soil10.2136/sssaj2000.642564x ↗
5. Durability of rammed earth walls exposed for 20 years to natural weathering10.1016/j.buildenv.2008.07.001 ↗
6. Effect of moisture content on the mechanical characteristics of rammed earth10.1016/j.conbuildmat.2013.12.067 ↗
7. Y. Chen, C. Xia, Z. Shepard, N. Smith, N. Rice, A.M. Peterson, A. Sakulich, Self-healing coatings for steel-reinforced Concrete. 2017 https://doi.org/10.1021/acssuschemeng.6b03142.10.1021/acssuschemeng.6b03142 ↗
8. Experimental investigation on the compressive strength of cored and molded cement-stabilized rammed earth samples10.1016/j.conbuildmat.2011.08.070 ↗
9. Advances on the assessment of soil suitability for rammed earth10.1016/j.conbuildmat.2012.12.049 ↗
10. Easton · 2007
11. Enhancing water resistance of earthen buildings with quicklime and oil10.1016/j.jclepro.2016.10.141 ↗
12. A study of Tung-oil – lime putty — A traditional lime based mortar10.1016/j.ijadhadh.2013.09.034 ↗
13. T.M. Grehk, R. Berger, U. Bexell. (2008). Investigation of the drying process of linseed oil using FTIR and ToF-SIMS. In Journal of Physics: Conference Series (Vol. 100, No. 1, p. 012019). IOP Publishing.10.1088/1742-6596/100/1/012019 ↗
14. Loess stabilization using cement, waste phosphogypsum, fly ash and quicklime for self-compacting rammed earth construction10.1016/j.conbuildmat.2019.117195 ↗
15. Assessing the effects of soil grading on the moisture content-dependent thermal conductivity of stabilised rammed earth materials10.1016/j.applthermaleng.2008.03.051 ↗
16. Intrinsic hydrophobicity of rammed earth10.1088/1757-899X/96/1/012024 ↗
17. The strength of unstabilised rammed earth materials10.1680/geot.2007.00129 ↗
18. Drying and oxidative degradation of linseed oil10.1016/S0141-3910(99)00020-8 ↗
19. Characterizing water repellency indices: Contact angle and water drop penetration time of hydrophobized sand10.1111/j.1747-0765.2007.00232.x ↗
20. Approaches to characterize the degree of water repellency10.1016/S0022-1694(00)00183-9 ↗
21. H. Li, Y. Cui, Z. Li, Y. Zhu, H. Wang. Progress in Organic Coatings Fabrication of microcapsules containing dual-functional tung oil and properties suitable for self-healing and self-lubricating coatings. Prog. Organ. Coat. 115(July 2017) (2018) 164–171. https://doi.org/10.1016/j.porgcoat.2017.11.019.10.1016/j.porgcoat.2017.11.019 ↗
22. Imparting water repellency in completely decomposed granite with Tung oil10.1016/j.jclepro.2019.05.032 ↗
23. Physical degradation of hydrophobized sands10.1016/j.powtec.2020.04.015 ↗
24. Characterization of coarse soils derived from igneous rocks for rammed earth10.1016/j.enggeo.2017.08.003 ↗
25. Soil wettability in ground engineering: fundamentals, methods, and applications10.1007/s11440-017-0570-0 ↗
26. Wettability of crushed air-dried minerals10.1680/jgele.15.00075 ↗
27. Degradation of rammed earth under wind-driven rain: the case of Fujian Tulou, China10.1016/j.conbuildmat.2020.119989 ↗
28. Comparing the environmental impact of stabilisers for unfired earth construction10.4028/www.scientific.net/KEM.600.132 ↗
29. Alternative stabilised rammed earth materials incorporating recycled waste and industrial by-products : Durability with and without water repellent10.1016/j.conbuildmat.2020.120629 ↗
30. Recent innovations in stabilized earthen construction
31. Eco-friendly modification of earthen construction with carrageenan: water durability and mechanical assessment10.1016/j.conbuildmat.2017.02.062 ↗
32. NZS 4298:2020 · 2020
33. The identification of organic additives in traditional lime mortar10.1016/j.culher.2013.04.001 ↗
34. B.V.V. Reddy, P.P. Kumar. Cement stabilised rammed earth . Part B: compressive strength and stress – strain characteristics (2011) 695–707. https://doi.org/10.1617/s11527-010-9659-8.10.1617/s11527-010-9659-8 ↗
35. Characteristic compressive strength of cement-stabilized rammed earth
36. Progress in organic coatings tung oil: an autonomous repairing agent for self-healing epoxy coatings10.1016/j.porgcoat.2010.08.017 ↗
37. Physical properties controlling water repellency in synthesized granular solids10.1111/ejss.12555 ↗
38. A. Schönemann, H.G.M. Edwards. Raman and FTIR microspectroscopic study of the alteration of Chinese tung oil and related drying oils during ageing. (2011) 1173–1180. https://doi.org/10.1007/s00216-011-4855-0.10.1007/s00216-011-4855-0 ↗
39. Chemical stabilization of rammed earth using calcium carbide residue and fly ash10.1016/j.conbuildmat.2018.02.209 ↗
40. Mini compaction test apparatus for fine grained soils10.1520/GTJ12542 ↗
41. X.W. Tang, F. Ying, T.S. Lin. Properties of clay mixed with sticky rice juice and tung oil. Adv. Unsaturated Soil Seepage Environ. Geotechn. (2006) (pp. 346–353).10.1061/40860(192)40 ↗
42. X. Tang, Y. Wang, T. Lin, J. Lin. Permeability and durability of soils improved by tung oil and sticky rice juice, Chinese J. Geotech. Eng. 32(3) (2010) 351–354.
43. Environmental assessment of rammed earth construction systems10.1108/02630800110393680 ↗
44. Walker · 2005
45. On using the effective contact angle and the water drop penetration time for classification of water repellency in dune soils10.1002/esp.3290130609 ↗
46. J. Xin, M. Li, R. Li, M.P. Wolcott, J. Zhang. Article A green epoxy resin system based on lignin and tung oil and its application in epoxy asphalt A green epoxy resin system based on lignin and tung oil and its application in epoxy asphalt. (2016) https://doi.org/10.1021/acssuschemeng.6b00256.10.1021/acssuschemeng.6b00256 ↗
47. Use of tung oil as a rejuvenating agent in aged asphalt: laboratory evaluations10.1016/j.conbuildmat.2019.117783 ↗
48. The performance of biodegradable tung oil coatings10.1016/j.porgcoat.2015.04.015 ↗
49. Water repellency of monument soil treated by tung oil10.1007/s10706-015-9939-8 ↗
50. Protecting earthen sites by soil hydrophobicity under freeze–thaw and dry–wet cycles10.1016/j.conbuildmat.2020.120089 ↗
51. Measured and simulated thermal behaviour in rammed earth houses in a hot-arid climate. Part A: Structural behaviour10.1016/j.jobe.2017.11.013 ↗
52. Investigation of Ancient Architectural Painting from the Taidong Tomb in the Western Qing Tombs, Hebei, China10.3390/coatings10070688 ↗
53. Building limes for cultural heritage conservation in China10.1186/2050-7445-1-25 ↗
54. The relationship of soil water repellency to aliphatic C and kaolin measured using DRIFT10.1071/SR01091 ↗
55. Soil identification and chemometrics for direct determination of nitrate in soils using FTIR-ATR mid-infrared spectroscopy10.1016/j.chemosphere.2005.03.034 ↗
56. Spectroscopic characterization of iron ores formed in different geological environments using FTIR, XPS, Mössbauer spectroscopy and thermoanalyses10.1016/j.saa.2014.10.090 ↗
57. Determination of the Contact Angles of Kaolin Intercalates of Oleochemicals Derived from Rubber Seed (HeveaBrasiliensis) and Tea Seed (CameliaSinensis) Oils by the Capillary Rise Method
58. Saulick Y., Lourenço S.D.N., Baudet B.A. Enhanced hydrophobicity of sands by silanization and powder coating, Géotechnique (2020) doi:10.1680/jgeot.19.P.108.10.1680/jgeot.19.P.108 ↗
59. Liu D., Lourenço S.D.N., Yang J., Zhou Z., Leung A.K. Discussion: Critical state of polymer-coated sands, Géotechnique (2019a) doi:10.1680/jgeot.19.D.001.10.1680/jgeot.18.P.015 ↗
60. Liu D., Sandeep C.S., Senetakis K., Nardelli V., Lourenço S.D.N. Micromechanical behaviour of a polymer-coated sand, Powder Technology (2019b) doi:10.1016/j.powtec.2019.02.030.10.1016/j.powtec.2019.02.030 ↗