Influence of surrounding rock temperature on fracture parameters of concrete for shotcrete use in the hot-dry tunnel environments
Source abstract
Abstract
Abstract The objective of this study was to explore the influence of the surrounding rock temperature on fracture parameters of concrete. Four different surrounding rock temperatures were adopted and the three-point bending test on notched beams was conducted in this paper. Based on this test, the fracture energy, initial fracture toughness, unstable fracture toughness, and crack extension resistance of concrete were calculated via the double-K fracture model the KR curve crack propagation criterion. The results are summarized as follows: (1) The fracture energy of concrete beams increased first then decreased with the increment of the hot-dry environment temperature, and reached the peak at 60 °C. (2) The initial fracture toughness, unstable fracture toughness, and crack extension resistance of concrete decreased with the increment of the hot-dry temperature. (3) The length of the fracture process zone increased first then decreased with the increment of the effective crack length.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Properties and Behavior · Rock Mechanics and Modeling · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. The geothermal potential of Swiss alpine tunnels10.1016/S0375-6505(03)00061-0 ↗
2. Major engineering constructions on top of a high-temperature geothermal system: problems encountered at tokaanu, New Zealand10.1016/j.geothermics.2006.06.001 ↗
3. A study on temperature distribution of surrounding rock and mechanical characteristics of lining of Monglian tunnel under high geothermal10.4028/www.scientific.net/AMR.255-260.2594 ↗
4. Temperature effect of rock burst for hard rock in deep-buried tunnel10.1007/s11069-014-1042-6 ↗
5. Experimental study on deformation of concrete for shotcrete use in high geothermal tunnel environments10.12989/cac.2017.19.5.443 ↗
6. Experimental study on mechanical property and pore structure of concrete for shotcrete use in a hot-dry environment of high geothermal tunnels10.1016/j.conbuildmat.2018.03.191 ↗
7. A multilayer thermo-elastic damage model for the bending deflection of the tunnel lining segment exposed to high temperatures10.1016/j.tust.2019.103142 ↗
8. Micromechanics based multi-level model for predicting the coefficients of thermal expansion of hybrid fiber reinforced concrete10.1016/j.conbuildmat.2018.09.030 ↗
9. Influence of surrounding rock temperature on mechanical property and pore structure of concrete for shotcrete use in a hot-dry environment of high-temperature geothermal tunnel10.1016/j.conbuildmat.2019.02.125 ↗
10. Experimental study on bond performance between shotcrete and rock in hot and humid tunnel environment10.1007/s12205-015-0159-9 ↗
11. Effect of temperature and humidity on the adhesion strength and damage mechanism of shotcrete-surrounded rock10.1016/j.conbuildmat.2016.08.126 ↗
12. Exploratory study on improving bond strength of shotcrete in hot and dry environments of high geothermal tunnels10.1007/s12205-016-0901-y ↗
13. Experimental study on mechanical and microstructural properties of cement-based paste for shotcrete use in high-temperature geothermal environment10.1016/j.conbuildmat.2018.04.106 ↗
14. The effect of exposure to elevated temperatures on the fracture energy of plain concrete10.1007/BF02486347 ↗
15. Residual fracture properties of normal and high-strength concrete subject to elevated temperatures10.1680/macr.2000.52.2.123 ↗
16. Residual fracture energy of high-performance and normal concrete subject to high temperatures10.1617/13880 ↗
17. Fracture energy of high-performance concrete at high temperatures up to 450 °C: the effects of heating temperatures and testing conditions (hot and cold)10.1680/macr.2006.58.5.277 ↗
18. N. You, C.L. Lin, Z.D. Lu, Fracture Behaviors of Post-fire Concrete, Adv. Mater. Res. 746 (2013) 352-356. Prokopski G. Fracture toughness of concretes at high temperature. J Mater Sci 1995;30:1609-12.10.4028/www.scientific.net/AMR.746.352 ↗
19. Variation of the fracture toughness of concrete with temperature10.1016/S0950-0618(97)00005-6 ↗
20. Determining residual double-K fracture toughness of post-fire concrete using analytical and weight function method10.1617/s11527-013-0097-2 ↗
21. Determination of residual fracture parameters of post-fire normal strength concrete Up to 600 °C using an energy approach10.1016/j.conbuildmat.2014.07.033 ↗
22. Properties of wet-mixed fiber reinforced shotcrete and fiber reinforced concrete with similar composition10.1016/j.cemconres.2004.05.033 ↗
23. Comparison of durability and mechanism between sprayed concrete and ordinary concrete at different erosion age
24. Part I: experimental investigation of crack propagation10.1023/A:1018668929989 ↗
25. Determination of double-K criterion for crack propagation in quasi-brittle materials. Part II: analytical evaluating and practical measuring methods for three-point bending notched beams10.1023/A:1018740728458 ↗
26. A simplified method for determining double-K fracture parameters for three-point bending tests10.1023/A:1007676716549 ↗
27. Tada · 1985
28. Crack extension resistance and fracture properties of quasi-brittle softening materials like concrete based on the complete process of fracture10.1023/A:1007553012684 ↗
29. Crack extension resistance based on the cohesive force in concrete10.1016/S0013-7944(99)00080-6 ↗
30. Two parameter fracture model for concrete10.1061/(ASCE)0733-9399(1985)111:10(1227) ↗
31. Predictions of nonlinear fracture process zone in concrete
32. An analytical method to determine the bridging stress transferred within the fracture process zone: I. General theory10.1016/0008-8846(91)90072-P ↗
33. Extension resistance curve of concrete considering variation of FPZ length10.1061/(ASCE)MT.1943-5533.0000207 ↗