The axial compressive behavior of stone-lightweight aggregate concrete-filled steel tubular stub columns
Source abstract
Abstract
Abstract To study the axial compressive mechanical properties of stone-lightweight aggregate concrete-filled steel tubular (SLACFST) stub columns, five circular stone-lightweight aggregate concrete-filled steel tubular (C-SLACFST) and square stone-lightweight aggregate concrete-filled steel tubular (S-SLACFST) stub columns were made by taking the volume replacement ratio of natural gravel aggregate and ceramsite in lightweight aggregate concrete as a variation parameter. After observing their mechanical process and failure modes, the axial load–displacement curves of the specimens were obtained. The influence of gravel replacement ratio on the energy dissipation and stiffness of the specimens was analyzed, and a simplified model for predicting their stiffness degradation was proposed. The plastic damage model was then used to verify those specimens with a finite element, and this model was subsequently adopted in the whole process analysis of these specimens and in finding out the loading relationship between the steel tube and core stone-lightweight aggregate concrete (SLAC). The effects of varying parameters on the compressive behavior of the specimens were investigated, and the extent to which these varying parameters are related to the ultimate bearing capacity of SLACFST was assessed via a grey correlation analysis. Results show that the rigidity of the calculated load–displacement curves in the elastic and elastic–plastic stages is greater than that of the test curves, but the ultimate bearing capacity and peak displacements agree with the test values within an acceptable error. Moreover, the simulated failure modes of the control specimens are the same as the test failure modes. Before reaching the ultimate bearing capacity, the core SLAC made a significant contribution to the bearing capacity of the specimen due to the constraint of steel tube. The negligible influence of gravel replacement ratio on the ultimate bearing capacity of SLACFST specimen. In addition, the nature gravel can inhibit the floating of LAC to a certain extent, so as to achieve the purpose of using SLAC to make SLACFST, reducing the self-weight of the structure while having higher bearing capacity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Developments and advanced applications of concrete-filled steel tubular (CFST) structures: Members10.1016/j.jcsr.2014.04.016 ↗
2. Axial and lateral stress-strain model for circular concrete-filled steel tubes with external steel confinement10.1016/j.engstruct.2016.03.026 ↗
3. Experimental and numerical investigation of concrete-filled hot-finished and cold-formed steel elliptical tubular stub columns10.1016/j.tws.2019.106437 ↗
4. Behavior of concrete-filled steel tubular stub columns and beams using dune sand as part of fine aggregate10.1016/j.conbuildmat.2013.10.049 ↗
5. Tests on inclined, tapered and STS concrete-filled steel tubular (CFST) stub columns10.1016/j.jcsr.2010.03.014 ↗
6. Mechanism and application of concrete-filled steel tubular support in deep and high stress roadway10.1016/j.conbuildmat.2018.07.118 ↗
7. Effect of preload on the axial capacity of concrete-filled composite columns10.1016/j.jcsr.2008.03.023 ↗
8. Compressive behaviours of circular concrete-filled steel tubes exposed to low-temperature environment10.1016/j.conbuildmat.2020.118460 ↗
9. Finite element study to address the axial capacity of the circular concrete-filled steel tubular stub columns10.1016/j.tws.2017.06.005 ↗
10. Axial capacity of rectangular concrete-filled steel tube columns – DOE approach10.1016/j.conbuildmat.2009.09.006 ↗
11. Compressive strength of axially loaded circular hollow centrifugal concrete-filled steel tubular short columns10.1016/j.engstruct.2019.109828 ↗
12. Experimental performance of circular concrete-filled steel tubular members with inner profiled steel under lateral shear load10.1016/j.engstruct.2019.109746 ↗
13. Numerical and experimental investigations of different cross-sectional configuration of plain concrete and CFST short columns under axial compression10.1007/s40999-019-00427-0 ↗
14. Effect of steel tube thickness on the behaviour of CFST columns: Experimental tests and design assessment10.1016/j.engstruct.2020.111687 ↗
15. Axial compressive behavior of concrete-filled steel tubular columns with interfacial damage10.1177/1369433219891639 ↗
16. Structural behavior of concrete-filled steel tube short columns stiffened by external and internal continuous spirals10.1016/j.istruc.2019.07.001 ↗
17. Dune sand concrete-filled steel tubular (CFST) stub columns under axial compression: Experiments10.1016/j.tws.2017.12.006 ↗
18. Experimental investigation on sea sand concrete-filled stainless steel tubular stub columns10.1016/j.jcsr.2018.12.009 ↗
19. Stability behavior of lightweight aggregate concrete filled steel tubular columns under axial compression
20. Failure of lightweight aggregate concrete-filled steel tubular columns10.12989/scs.2004.4.1.001 ↗
21. Ultimate moment capacity of foamed and lightweight aggregate concrete-filled steel tubes10.12989/scs.2003.3.3.199 ↗
22. Strength of short composite rectangular hollow section columns filled with lightweight aggregate concrete10.1016/j.engstruct.2006.10.003 ↗
23. Interface bond behaviour between circular steel tube and lightweight aggregate concrete
24. Behavior of reinforced lightweight aggregate concrete-filled circular steel tube columns under axial loading10.1016/j.istruc.2018.09.001 ↗
25. Behavior of lightweight aggregate concrete-filled steel tube under horizontal cyclic load
26. Finite element modelling of concrete-filled steel stub columns under axial compression10.1016/j.jcsr.2013.07.001 ↗
27. Experimental and numerical study on the compressive behavior of micro-expansive ultra-high-performance concrete-filled steel tube columns10.1016/j.conbuildmat.2020.119150 ↗
28. Experimental and numerical behavior of eccentrically loaded square concrete-filled steel tubular long columns made of high-strength steel and concrete10.1016/j.tws.2020.107289 ↗
29. A.K. Samani, M. M. Attard, A stress-strain model for uniaxial and confined concrete under compression, Eng. Struct. 2012, 41(3):335-349. Eng. Struct. 41 (3) (2012) 335–349.10.1016/j.engstruct.2012.03.027 ↗
30. An analytical model for stress-strain behavior of confined concrete10.1016/j.engstruct.2005.03.002 ↗
31. GB 50017-2017 (Standard for design of steel structures), China Architecture & Building Press, Beijing, 2017(in Chinese).
32. JGJ/T12-2019 (Technical standard for application of lightweight aggregate concrete), China Architecture & Building Press, Beijing, 2019 (in Chinese).
33. Behavior of lightweight aggregate concrete filled steel tubular slender columns under axial compression
34. Grey correlation analysis between strength of slag cement and particle fractions of slag powder10.1016/j.cemconcomp.2007.02.004 ↗
35. Forecasting construction manpower demand by gray model10.1061/(ASCE)CO.1943-7862.0000238 ↗
36. Comparative study on effects of binders and curing ages on properties of cement emulsified asphalt mixture using gray correlation entropy analysis10.1016/j.conbuildmat.2013.12.093 ↗
37. A critical assessment of the compressive behavior of reinforced recycled aggregate concrete columns10.1016/j.engstruct.2018.02.003 ↗
38. An evaluation of Mahalanobis Distance and grey relational analysis for crack pattern in concrete structures10.1016/j.commatsci.2012.07.002 ↗
39. Green decoration materials selection under interior environment characteristics: a grey-correlation based hybrid MCDM method10.1016/j.rser.2017.08.050 ↗