journal article·2021-09

Mechanical properties and volumetric deformation of early-age concrete containing CaO-MgO blended expansive agent and temperature rising inhibitor

Haitao Zhao, Yu Xiang, Xiaodong Chen, Jie Huang, Wen Xu, Hua Li, Yujiang Wang, Penggang Wang

Publisher page

Abstract

Abstract The early-age cracking occurred frequently because of the large autogenous shrinkage and the substantial and rapid temperature drop in high-strength and high-performance concrete structure, which seriously prejudices the durability and even the safety of the structure. This paper aimed at utilizing the combination of CaO-MgO blended expansive agent (CMEA) and Temperature rising inhibitor (TRI) to compensate for the concrete contraction. The results showed that the addition of TRI and/or CMEA weakened the strength and dynamic elastic modulus (DEM) as well as increasing the curing temperature. The CMEA addition could improve the relative humidity (RH) in specimens with or without TRI. When TRI content increased, the RH of specimens with TRI only decreased apparently but the RH decline in specimens containing CMEA and TRI was negligible. The CMEA could compensate for the concrete shrinkage not merely at the early stage but the later stage. The combination of CMEA and TRI increased the expansion peak and reduced autogenous shrinkage compared to single CMEA addition. With the increasing TRI content, the autogenous shrinkage of concrete increased visibly but the autogenous shrinkage of specimens containing TRI and CMEA decreased first and then increased. Additionally, the autogenous shrinkage and shrinkage rate of specimens with TRI and CMEA decreased markedly with curing temperature due to CMEA better expansion effect at high curing temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Experimental and numerical analysis on coupled hygro-thermo-chemo-mechanical effect in early-age concrete10.1061/(ASCE)MT.1943-5533.0003666 ↗
2. Shrinkage crack inhibiting of cast in situ tunnel concrete by double regulation on temperature and deformation of concrete at early age10.1016/j.conbuildmat.2019.117834 ↗
3. Early-age shrinkage development of ultra-high-performance concrete under heat curing treatment10.1016/j.conbuildmat.2016.11.024 ↗
4. Hydration products, internal relative humidity and drying shrinkage of alkali activated slag mortar with expansion agents10.1016/j.conbuildmat.2017.09.162 ↗
5. Influence of cement and expansive additive types in the performance of self-stressing and self-compacting concretes for structural elements10.1016/j.conbuildmat.2015.05.113 ↗
6. Simplified chemo-mechanical model of hydration/ expansion of calcium-oxide-type expansive agent in cement-based materials10.1680/jmacr.18.00450 ↗
7. Evaluation method and mitigation strategies for shrinkage cracking of modern concrete10.1016/j.eng.2021.01.006 ↗
8. Impact of temperature rising inhibitor on hydration kinetics of cement paste and its mechanism10.1016/j.cemconcomp.2018.07.018 ↗
9. Effect of a novel starch-based temperature rise inhibitor on cement hydration and microstructure development10.1016/j.cemconres.2019.105961 ↗
10. Effect of chloride ingress on self-healing recovery of smart cementitious composite incorporating crystalline admixture and MgO expansive agent10.1016/j.cemconres.2020.106252 ↗
11. The influence of the hydration procedure of MgO expansive agent on the expansive behavior of shrinkage-compensating mortar10.1016/j.conbuildmat.2019.01.016 ↗
12. Modification of magnesium oxysulfate cement by incorporating weak acids10.1061/(ASCE)MT.1943-5533.0002418 ↗
13. Effect of CaO and MgO based expansive agent on deformation and mechanical properties of concrete-filled steel tubes10.1016/j.conbuildmat.2020.118723 ↗
14. Synergetic effects of curing temperature and hydration reactivity of MgO expansive agents on their hydration and expansion behaviours in cement pastes10.1016/j.conbuildmat.2019.02.150 ↗
15. Autogenous shrinkage in high-performance cement paste: an evaluation of basic mechanisms10.1016/S0008-8846(02)00890-6 ↗
16. T.C. Powers, Mechanism of shrinkage and reversible creep of hardened cement paste. Proceedings of conference on structure of concrete and its behavior under load, Cement and Concrete Association, London, (1965) 319-344.
17. Surface tension, shrinkage and strength of hardened cement paste
18. Modified Lucas-Washburn function of capillary transport in the calcium silicate hydrate gel pore: a coarse-grained molecular dynamics study10.1016/j.cemconres.2020.106166 ↗
19. Investigation of moisture transport in cement-based materials using low-field nuclear magnetic resonance imaging10.1680/jmacr.19.00211 ↗
20. China Standard GB 175-2007/XG1-2009, Common portland cement, General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Beijing, 2009. (in Chinese).
21. ASTM C150/C150 M. Standard specification for portland cement. ASTM International, West Conshohocken, PA, 2015.
22. China Standard GB 23439-2009, Expansive agents for concrete, General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Beijing, 2010. (in Chinese).
23. ASTM C806-18 Standard Test Method for Restrained Expansion of Expansive Cement Mortar. ASTM International, West Conshohocken, PA, 2018.
24. China Standard DL/T 5150-2017, Test code for hydraulic concrete, Standard of the electric power industry of the People’s Republic of China, Beijing, 2017. (in Chinese).
25. Effects of pre-soaked zeolite and CaO-based expansive agent on mechanical properties and autogenous deformation of early-age concrete10.1016/j.conbuildmat.2020.120370 ↗
26. Autogenous shrinkage of concrete: a balance between autogenous swelling and self-desiccation10.1016/j.cemconres.2004.05.050 ↗
27. Investigation on the shrinkage-reducing effect of super-absorbent polymer in high-strength concrete and its mechanism
28. Improving test methods to measure early age autogenous shrinkage in concrete based on air cooling
29. Experimental study on the relationship between shrinkage and interior humidity of concrete at early age10.1680/macr.2010.62.3.191 ↗
30. ASTM C39/C39M-20, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. ASTM International, West Conshohocken, PA, 2020.
31. ASTM C496/C 496M-17, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. ASTM International, West Conshohocken, PA, 2017.
32. ASTM C597-16, Standard Test Method for Pulse Velocity Through Concrete. ASTM International, West Conshohocken, PA, 2016.
33. Ultrasonic pulse velocity test of concrete properties as specified in various standards10.1016/0958-9465(96)00026-1 ↗
34. A starch-based admixture for reduction of hydration heat in cement composites10.1016/j.conbuildmat.2018.03.199 ↗
35. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes10.1016/j.cemconres.2006.11.016 ↗
36. Mechanical properties of polyvinyl alcohol fiber-reinforced concrete composite containing fly ash and nano-SiO210.1166/sam.2018.3259 ↗
37. Supplementary cementitious materials: strength development of self-compacting concrete under different curing temperature10.1016/j.proeng.2015.11.109 ↗
38. Calculation of moisture distribution in early age concrete
39. MgO expansive cement and concrete in China: Past, present and future10.1016/j.cemconres.2013.12.007 ↗
40. Experimental and theoretical analysis on coupled effect of hydration, temperature and humidity in early-age cement-based materials10.1016/j.ijheatmasstransfer.2019.118784 ↗
41. Inhibition mechanisms of steel slag on the early-age hydration of cement10.1016/j.cemconres.2020.106283 ↗
42. Effects of curing temperature and fly ash on the expansion efficiency of shrinkage-compensating concrete