RETRACTED: Effect of micro polypropylene fibres and nano TiO2 on the fresh- and hardened-state properties of geopolymer concrete
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Source abstract
Abstract
Abstract This study intends to assess the influence of micro polypropylene fibres (MPPF) and nano-TiO2 on the fresh- and hardened-state properties of fly ash (FA) based geopolymer concrete (GPC). 15 concrete mixes were produced and the slump, compressive, splitting tensile and flexural strengths, sorptivity, sulphate and chloride attack were measured. Five TiO2 incorporation ratios were used: 0%, 1%, 2%, 3%, 4% and 5% in terms of weight. Additionally, three MPPF contents were added in terms of volume: 0%, 1% and 2%. One sample was selected as a control specimen with no TiO2 and MPPF. Furthermore, new models were developed to predict the mechanical properties of GPC produced by different TiO2 and MPPF contents. The results showed that the mechanical properties and resistance of FA-based GPC against sulphate and chloride attacks were considerably improved with the use of nano-TiO2 and these properties were further enhanced when MPPF were also added. Therefore, using 5% nano-TiO2 with 2% MPPF improved the resistance of GPC against sulphate and chloride attacks respectively by 53% and 36%. In addition, the proposed models, with a high agreement with the experimental results, are useful tools to predict the mechanical properties of FA-based GPC produced with different nano-TiO2 and MPPF contents.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Construction and demolition waste best management practice in Europe10.1016/j.resconrec.2018.04.016 ↗
2. Construction and demolition waste generation and properties of recycled aggregate concrete: a global perspective10.1016/j.jclepro.2018.03.085 ↗
3. An overview of study on recycled aggregate concrete in China (1996–2011)10.1016/j.conbuildmat.2011.12.074 ↗
4. Use of recycled aggregates in moulded concrete bricks and blocks10.1016/S0950-0618(02)00019-3 ↗
5. Influence of nano TiO2 on strength and durability properties of geopolymer concrete
6. Effects of nano-TiO2, nano-Al2O3, and nano-Fe2O3 on rheology, mechanical and durability properties of self-consolidating concrete (SCC): An experimental study10.1016/j.conbuildmat.2020.118444 ↗
7. Hydration and properties of nano-TiO2 blended cement composites10.1016/j.cemconcomp.2012.02.009 ↗
8. “Effects of adding nano- TiO2 on compressive strength, drying shrinkage, and carbonation and microstructure of fluidized bed fly ash-based geopolymer concrete10.1016/j.conbuildmat.2015.12.095 ↗
9. Chakraborty Effect of nano materials in geopolymer concrete Perspectives in science
10. The mechanical properties of fly ash-based geopolymer concrete with alkaline activators10.1016/j.conbuildmat.2013.05.069 ↗
11. Mechanical properties of geopolymer concrete composites
12. Comparison of long-term performance between alkali-activated slag and fly ash geopolymer concretes10.1016/j.conbuildmat.2017.03.153 ↗
13. Influence of activator solution on microstructural and mechanical properties of geopolymer concrete
14. Nanotechnology in concrete- A review10.1016/j.conbuildmat.2010.03.014 ↗
15. Influence of selected parameters on compressive strength of geopolymer produced from ground glass fibre10.1016/j.conbuildmat.2017.09.166 ↗
16. Effects of adding nano- TiO2 on compressive strength, drying shrinkage, and carbonation and microstructure of fluidized bed fly ash-based geopolymer concrete10.1016/j.conbuildmat.2015.12.095 ↗
17. Effect of nano materials in geopolymer concrete10.1016/j.pisc.2016.04.049 ↗
18. Effect of chemical admixtures on the properties of high calcium fly ash geopolymer10.1007/s12613-011-0448-3 ↗
19. Effects of nano-TiO2 on strength, shrinkage and microstructure of alkali-activated slag pastes10.1016/j.cemconcomp.2014.11.009 ↗
20. Effect of different fibre types on the structural performance of recycled aggregate concrete beams with spliced bars10.1016/j.jobe.2020.102090 ↗
21. Biaxial mechanical behaviour of polypropylene fibres reinforced self-compacting concrete10.1016/j.conbuildmat.2021.122416 ↗
22. Influence of polypropylene fibres on the thermal and acoustic behaviour of untreated coal coarse aggregates concrete10.1016/j.jobe.2020.102125 ↗
23. Influence of steel fibres on the mechanical and physical performance of self-compacting concrete manufactured with waste materials and fillers10.1016/j.conbuildmat.2020.121806 ↗
24. Comparison of the effect of the steel and polypropylene fibres on the flexural behaviour of recycled aggregate concrete beams10.1016/j.istruc.2020.11.013 ↗
25. The effect of polypropylene fibres on the compressive strength, impact and heat resistance of self-compacting concrete10.1016/j.istruc.2020.02.022 ↗
26. Effect of untreated coal waste as fine and coarse aggregates replacement on the properties of steel and polypropylene fibres reinforced concrete10.1016/j.mechmat.2020.103592 ↗
27. Mechanical and durability properties of steel fibre-reinforced rubberised concrete10.1016/j.conbuildmat.2020.119463 ↗
28. Improved bending behaviour of steel fibres recycled aggregate concrete beams with a concrete jacket
29. Shear behaviour of concrete beams with recycled aggregate and steel fibres10.1016/j.conbuildmat.2019.01.130 ↗
30. Influence of steel fibres on the flexural performance of reinforced concrete beams with lap-spliced bars
31. Experimental study on the flexural behaviour and ductility ratio of steel fibres coarse recycled aggregate concrete beams10.1016/j.conbuildmat.2018.07.132 ↗
32. Influence of polypropylene fibres and silica fume on the mechanical and fracture properties of ultra-high-performance geopolymer concrete10.1016/j.conbuildmat.2021.122753 ↗
33. Development of high performance sustainable optimized fibre reinforced geopolymer concrete and prediction of compressive Strength
34. Physical & mechanical properties of fibre reinforced metakaolin-based geopolymer concrete10.1016/j.conbuildmat.2020.118965 ↗
35. Investigations on the response of ceramic ball aggregated and steel fibre reinforced geopolymer-based ultrahigh-performance concrete (G-UHPC) to projectile penetration10.1016/j.compstruct.2020.112983 ↗
36. Development of ultra-high performance geopolymer concrete (UHPGC): Influence of steel fibre on mechanical properties
37. Mechanical and flexural performance of synthetic fibre reinforced geopolymer concrete10.1016/j.conbuildmat.2018.07.110 ↗
38. Effect of fibre hybridization on energy absorption and synergy in concrete10.1007/s11709-019-0558-2 ↗
39. Effect of red mud (bauxite residue) as cement replacement on the properties of self-compacting concrete incorporating various fillers10.1016/j.jclepro.2019.118213 ↗
40. Self-compacting architectural concrete production using red mud10.1016/j.conbuildmat.2019.07.248 ↗
41. Performance of concrete with waste granite powder: The effect of superplasticizers10.3390/app8101808 ↗
42. Mechanical, environmental and economic performance of structural concrete containing silica fume and marble industry waste powder10.1016/j.conbuildmat.2018.02.192 ↗
43. ASTM C143, (2004) ‘‘Slump of hydraulic cement concrete”. Annual Book of ASTM Standards.
44. ASTM C469/C469M (2004) ‘‘Standard test method for static modulus of elasticity and Poisson’s ratio of concrete in compression”, Annual Book of ASTM Standards.
45. JCI-S-002-2003, (2003) “Method of test for the load-displacement curve of fibre reinforced concrete by use of notched beam”, Japan Concrete Institute (JCI).
46. ASTM C1858 (2017) ‘‘Standard Practice for Design, Construction, and Material Requirements for Direct Hung Suspended T-bar Type Ceiling Systems Intended to Receive Gypsum Panel Products in Areas Subject to Earthquake Ground Motions”, Annual Book of ASTM Standards.
47. ASTM C 1012 (2018) ‘‘Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution”, Annual Book of ASTM Standards.
48. BS 8500-2 (2015) “Concrete. Complementary British Standard to BS EN 206-1”. Specification for constituent materials and concrete. British.
49. ASTM C1760 (2012) ‘‘Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete”, Annual Book of ASTM Standards.
50. Influences of nano-TiO2 on the properties of cement-based materials: Hydration and drying shrinkage10.1016/j.conbuildmat.2015.02.003 ↗
51. A Effect of nano-SiO2 and nano-TiO2 addition on the rheological behaviour and the hardened properties of cement mortars10.1016/j.msea.2011.10.102 ↗
52. Incorporation of nano TiO2 in black rice husk ash mortars10.1016/j.conbuildmat.2013.06.066 ↗
53. Graybeal · 2012
54. Influence of Nano-Silica on the properties of recycled aggregate concrete10.1016/j.conbuildmat.2014.01.003 ↗
55. Effects of steel fibre content and shape on mechanical properties of ultra-high-performance concrete10.1016/j.conbuildmat.2015.11.028 ↗
56. Assessment of steel fibre corrosion in self-healed ultra-high-performance fibre-reinforced concrete and its effect on tensile performance10.1016/j.cemconres.2020.106091 ↗
57. Enhancement of mechanical properties of fly ash geopolymer containing fine recycled concrete aggregate with micro carbon fibre10.1016/j.jobe.2021.102403 ↗
58. Influence of alkali concentrations on the mechanical properties of geopolymer concrete
59. Effects of nano-silica on the strengths of geopolymer concrete cured at ambient temperature
60. Influence of nano TiO2 on geopolymer concrete