Evaluation of performance parameters of cement mortar in semi-flexible pavement using rubber powder and nano silica additives
Source abstract
Abstract
Abstract Semi-flexible pavement offers a high bearing capacity and resistance to rutting. It comprises a layer of cement mortar and one of porous asphalt and is subject to thermal cracking because of the difference in stiffness of these materials. In this study, rubber powder (RP) was used to approximate the stiffness of the cement mortar relative to porous asphalt concrete in order to reduce thermal cracking. Nano silica (NS) was used to reduce the negative effect of RP on the compressive and flexural strength. The effects of these additives on the behavior of 20 mortar mixtures were investigated by mechanical testing and scanning electron microscopy. The results showed that 0.5% to 1% NS can prevent the fluidity loss and increase the drying shrinkage in the matrix. Three of the best-performing mortars were rated, and the optimum mixture was NS1-RP5 containing 1% NS and 5% RP. With an elastic modulus loss of about 20%, it exhibited the best performance and mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Asphalt Pavement Performance Evaluation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. De Oliveira, J.R.M., Grouted macadam: material characterisation for pavement design. 2006, University of Nottingham.
2. Anderton, G.L., Engineering properties of resin modified pavement (RMP) for mechanistic design. 2000, Engineer Research and Development Center Vicksburg MS Geotechnical Lab.
3. Jointless pavements for heavy-duty airport application: the semi-flexible approach10.1061/40579(271)7 ↗
4. Formulation and performance comparison of grouting materials for semi-flexible pavement10.1016/j.conbuildmat.2016.04.062 ↗
5. Hassan, K. and A. Setyawan. Cold mix, cold laid semi-flexible Grouted Macadams, mix design and properties. in Performance of Bituminous and Hydraulic Materials in Pavements: Proceedings of the Fourth European Symposium, Bitmat4, Nottingham, UK, 11-12 April 2002. 2017. Routledge.
6. Development of hierarchical ranking strategy for the asphalt skeleton in semi-flexible pavement10.1016/j.conbuildmat.2018.12.131 ↗
7. Aggregate gradation influence on grouting results and mix design of asphalt mixture skeleton for semi-flexible pavement10.1520/JTE20150190 ↗
8. Effects of aggregate gradation on the physical properties of semiflexible pavement10.1155/2014/529305 ↗
9. Effect of cementitious grouts on the properties of semi-flexible bituminous pavements
10. Effects of using silica fume and polycarboxylate-type superplasticizer on physical properties of cementitious grout mixtures for semiflexible pavement surfacing10.1155/2014/596364 ↗
11. Development of a semirigid pavement incorporating ultrarapid hardening cement and chemical admixtures for cement grouts10.1155/2017/4628690 ↗
12. Development of a semi-flexible heavy duty pavement surfacing incorporating recycled and waste aggregates–Preliminary study10.1016/j.conbuildmat.2015.10.165 ↗
13. Koting, S., H. Mahmud, and M.R. Karim. Influence of superplasticizer type and dosage on the workability and strength of cementitious grout for semi-flexible pavement application. in Proceedings of the Eastern Asia Society for Transportation Studies Vol. 6 (The 7th International Conference of Eastern Asia Society for Transportation Studies, 2007). 2007. Eastern Asia Society for Transportation Studies.
14. Effect of different superplasticisers on the physical and mechanical properties of cement grouts10.1016/j.conbuildmat.2013.09.050 ↗
15. Design and performance validation of high-performance cement paste as a grouting material for semi-flexible pavement10.1016/j.conbuildmat.2016.09.036 ↗
16. Research on properties of high-performance cement mortar for semiflexible pavement10.1155/2018/4613074 ↗
17. Improvement on the crack resistance property of semi-flexible pavement by cement-emulsified asphalt mortar
18. Utilization of waste rubber powder in semi-flexible pavement10.4028/www.scientific.net/KEM.599.361 ↗
19. Design of mix proportion of cement mortar with high-performance composite semi-flexible pavement
20. Comprehensive service properties evaluation of composite grouting materials with high-performance cement paste for semi-flexible pavement10.1016/j.conbuildmat.2017.07.122 ↗
21. The property research on interfacial modificated semi-flexible pavement material
22. Improvement on the crack resistance property of semi-flexible pavement by cement-emulsified asphalt mortar10.4028/www.scientific.net/KEM.509.26 ↗
23. Open-graded asphalt concrete grouted by latex modified cement mortar
24. Sun · 2015
25. Experimental analysis of semi-flexible pavement by using an appropriate cement asphalt emulsion paste10.1016/j.conbuildmat.2019.116994 ↗
26. Impact analysis of Carboxyl Latex on the performance of semi-flexible pavement using warm-mix technology10.1016/j.conbuildmat.2018.05.173 ↗
27. Study of the self-healing performance of semi-flexible pavement materials grouted with engineered cementitious composites mortar based on a non-standard test10.3390/ma12213488 ↗
28. Application of rubberized cement-based composites in pavements: Suitability and considerations10.1016/j.conbuildmat.2019.08.007 ↗
29. Rubberized mortar: The influence of aggregate granulometry in mechanical resistances and acoustic behavior10.1016/j.conbuildmat.2018.12.123 ↗
30. Recycling of waste tire rubber as aggregate in concrete: durability-related performance10.1016/j.jclepro.2015.08.046 ↗
31. Analysis behaviour of static and dynamic properties of ethylene-propylene-diene-methylene crumb rubber mortar10.1016/j.conbuildmat.2013.10.018 ↗
32. Mechanical performance of warm-mixed porous asphalt mixture with steel slag and crumb-rubber(-)SBS modified bitumen for seasonal frozen regions10.3390/ma12060857 ↗
33. Influence of rubber size on properties of crumb rubber mortars10.3390/ma9070527 ↗
34. Sustainable use of recycled crumb rubbers in eco-friendly alkali activated slag mortar: dynamic mechanical properties10.1016/j.jclepro.2018.08.306 ↗
35. Properties of nano silica modified rubbercrete10.1016/j.jclepro.2016.02.007 ↗
36. Properties of concrete incorporating rubber tyre particles10.1680/macr.1998.50.4.297 ↗
37. Rubber modified concrete improved by chemically active coating and silane coupling agent10.1016/j.conbuildmat.2013.06.072 ↗
38. Hardened properties of concrete mixtures containing pre-coated crumb rubber and silica fume10.1016/j.jclepro.2014.06.068 ↗
39. Use of tire rubber particles as addition to cement paste10.1016/S0008-8846(00)00373-2 ↗
40. Influence of scrap rubber addition to Portland I concrete composites: destructive and non-destructive testing10.1016/j.compstruct.2005.09.037 ↗
41. Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume10.1016/j.conbuildmat.2005.09.001 ↗
42. Concrete made with recycled tire rubber: effect of alkaline activation and silica fume addition10.1016/j.jclepro.2010.11.014 ↗
43. Hydration characteristic, thermal expansion and microstructure of cement containing nano-silica10.1016/j.conbuildmat.2014.02.039 ↗
44. Comparative study of the characteristics of nano silica-, silica fume-and fly ash-incorporated cement mortars10.1590/S1516-14392014005000054 ↗
45. Effect of nano-silica particles on the hydration, the rheology and the strength development of a blended cement paste10.1016/j.cemconcomp.2018.10.007 ↗
46. Synergistic effects of micro-silica and nano-silica on strength and microstructure of mortar10.1016/j.conbuildmat.2017.02.115 ↗
47. Combined effects of micro-silica and nano-silica on durability of mortar10.1016/j.conbuildmat.2017.09.105 ↗
48. An experimental investigation of crumb rubber concrete confined by fibre reinforced polymer tubes10.1016/j.conbuildmat.2013.12.007 ↗
49. Zoorob, S., K. Hassan, and A. Setyawan, Cold mix, cold laid semi-flexible Grouted Macadams, mix design and properties. 2017. 105-112.10.4324/9780203743928-18 ↗
50. ASTM, C., 939. Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method), Annual book of ASTM Standards, 1994. 4.
51. ASTM, C., 109/C 109M-02. Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens), 2002.
52. Astm · 2002
53. ASTM, C., 596-01. Standard Specification for Drying Shrinkage of Mortar Containing Hydraulic Cement. Annual Book of ASTM Standards.
54. ASTM, C., 157/C 157 M.(2004). Standard Test Method for Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete. ASTM International.
55. ASTM, C., 511:‘Specification for Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes’. ASTM International, Pennsylvania, 2013.
56. Relationship between compressive strength and modulus of elasticity of high strength concrete
57. A practical equation for elastic modulus of concrete
58. An experimental evaluation of prediction models for the mechanical behavior of unreinforced, lime-mortar masonry under compression10.1016/j.jobe.2015.10.001 ↗