Pore connectivity of oil well cement in the early hydration stage by in situ electrical resistivity measurements and low-field nuclear magnetic resonance
Source abstract
Abstract
Abstract The pore connectivity of cement slurry is an important parameter to be considered when investigating short-term gas migration in the cementing engineering of natural gas wells. This study combined electrical resistivity measurements (ERM), low-field nuclear magnetic resonance, and multi-phase phenomenological models to create an in situ evaluation method for the pore connectivity of cement slurry. This method was effective for investigating the porosity, pore size, and pore connectivity of the cement slurry in the early hydration stage. The results showed that the initial formation factor of the cement slurry was determined by the water-to-cement ratio (w/c). In the initial hydration stage, the porosity of the cement slurry (w/c = 0.44) was approximately 58%. Additionally, the pore size ranged from 11 to 75 nm, and the pore connectivity was 0.65–0.70. The small amount of Q1 calcium silicate hydrate (C-S-H) generated during the hydration induction period did not affect the dispersed-particle microstructure of the cement slurry and had little effect on its pore structure. During the hydration acceleration period, numerous Q1 and Q2 SiO4 species were detected, which converted the microstructure of the cement slurry to a cross-linked structure, thereby reducing the pore size and pore connectivity of the cement slurry. The porosity of the cement slurry reduced to 52% after hydration for 12 h at 30 °C. However, the pore size distribution decreased to 4.5–35 nm, and the pore connectivity varied from 0.5 to 0.58.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Drilling and Well Engineering · Hydrocarbon exploration and reservoir analysis · Hydraulic Fracturing and Reservoir Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Combinatorial molecular optimization of cement hydrates10.1038/ncomms5960 ↗
2. Experimental investigation of the early-age mechanical behaviour of oil-well cement paste10.1016/j.cemconres.2019.01.001 ↗
3. Inhibitory effects of functionalized polycarboxylate retarder on aberrant thickening phenomena of oil well cement at high temperature10.1016/j.conbuildmat.2020.121994 ↗
4. Onset of creation of residual strain during the hydration of oil-well cement paste10.1016/j.cemconres.2018.10.022 ↗
5. Retarder effect on hydrating oil well cements investigated using in situ neutron/X-ray pair distribution function analysis10.1016/j.cemconres.2019.105920 ↗
6. Experimental design of a well cement slurry for rapid gel strength development10.1016/j.conbuildmat.2018.10.074 ↗
7. Theory-based review of limitations with static gel strength in cement/matrix characterization10.2118/178923-PA ↗
8. B.R. Crook, J. Heathman, Predicting potential gas-flow rates to determine best cementing practices short-term gas migration, 1998.
9. Effect of the hydration rate and microstructure of Portland cement slurry on hydrostatic pressure transfer10.1016/j.powtec.2019.04.066 ↗
10. Relationship between the microstructure/pore structure of oil-well cement and hydrostatic pressure10.1007/s11242-018-1078-2 ↗
11. A new prediction model for hydrostatic pressure reduction of anti-gas channeling cement slurry based on large-scale physical modeling experiments10.1016/j.petrol.2018.09.035 ↗
12. New methodology for gas migration prediction before oilwell cementing10.5419/bjpg2012-0006 ↗
13. A newly developed wellbore-simulation apparatus to study performance of oilwell cements10.2118/191129-PA ↗
14. Characterizing curing-cement slurries by permeability, tensile strength, and shrinkage10.2118/57712-PA ↗
15. Application of neutron imaging to investigate fundamental aspects of durability of cement-based materials: A review10.1016/j.cemconres.2018.03.003 ↗
16. Effects of steam on the compressive strength and microstructure of cement paste cured under alternating ultrahigh temperature10.1016/j.cemconcomp.2020.103681 ↗
17. Analysis of pore structure, contact angle and pore entrapment of blended cement pastes from mercury porosimetry data10.1016/j.cemconcomp.2012.06.005 ↗
18. Ink-bottle effect in mercury intrusion porosimetry of cement-based materials10.1006/jcis.2001.7962 ↗
19. A novel pore structure tortuosity concept based on nitrogen sorption hysteresis data10.1021/ie000626y ↗
20. Determining porosity and pore network connectivity of cement-based materials by a modified non-contact electrical resistivity measurement: Experiment and theory10.1016/j.matdes.2018.06.045 ↗
21. A reassessment of mercury intrusion porosimetry by comparison with 1H NMR relaxometry10.1016/j.cemconres.2017.05.024 ↗
22. Why permeability to water is anomalously lower than that to many other fluids for cement-based material?10.1016/j.cemconres.2017.08.002 ↗
23. Evaluation of drying methods by nitrogen adsorption10.1016/j.cemconres.2019.02.016 ↗
24. Pore-size resolved water vapor adsorption kinetics of white cement mortars as viewed from proton NMR relaxation10.1016/j.cemconres.2017.12.002 ↗
25. Monitoring the evolution of material structure in cement pastes and concretes using electrical property measurements10.1016/j.conbuildmat.2013.08.038 ↗
26. Effects of water content, magnesia-to-phosphate molar ratio and age on pore structure, strength and permeability of magnesium potassium phosphate cement paste10.1016/j.matdes.2014.07.073 ↗
27. Effects of microstructure and pore water on electrical conductivity of cement slurry during early hydration10.1016/j.compositesb.2019.107435 ↗
28. NMR observation of water transfer between a cement paste and a porous medium10.1016/j.cemconres.2017.02.027 ↗
29. Evolution of pore structure of oil well cement slurry in suspension–solid transition stage10.1016/j.conbuildmat.2019.04.075 ↗
30. NMR relaxation of molecules confined inside the cement paste pores under partially saturated conditions10.1016/j.cemconres.2016.07.012 ↗
31. A critical comparison of 3D experiments and simulations of tricalcium silicate hydration10.1111/jace.15323 ↗
32. D.P. Bentz, CEMHYD3D: A three-dimensional cement hydration and microstructure development modeling package, 2005. doi:https://doi.org/10.6028/NIST.IR.7232.10.6028/NIST.IR.7232 ↗
33. Effective diffusivity of cement pastes from virtual microstructures: Role of gel porosity and capillary pore percolation10.1016/j.conbuildmat.2018.01.010 ↗
34. A three-dimensional lattice Boltzmann method based reactive transport model to simulate changes in cement paste microstructure due to calcium leaching10.1016/j.conbuildmat.2018.01.114 ↗
35. Numerical simulation of the effect of cement particle shapes on capillary pore structures in hardened cement pastes10.1016/j.conbuildmat.2018.04.039 ↗
36. American Petroleum Institute (API), API 10A, Specification for cements and materials for well cementing, (2002).
37. American Petroleum Institute (API), Recommended practice for testing well cements, (2013).
38. Electrical conductivity of drying cement paste10.1617/s11527-006-9211-z ↗
39. Capillary porosity depercolation in cement-based materials: Measurement techniques and factors which influence their interpretation10.1016/j.cemconres.2011.04.006 ↗
40. Early-age hydration of fresh concrete monitored by non-contact electrical resistivity measurement10.1016/j.cemconres.2007.09.027 ↗
41. Characterisation of pore structure development of alkali-activated slag cement during early hydration using electrical responses10.1016/j.cemconcomp.2018.02.016 ↗
42. Effects of ammonium hydrolyzed polyacrylonitrile on oil-well cement slurry10.1061/(ASCE)MT.1943-5533.0001933 ↗
43. Application of nuclear magnetic resonance pore structure analysis to porous silica glass10.1063/1.343088 ↗
44. Surface relaxation and chemical exchange in hydrating cement pastes : A two-dimensional NMR10.1103/PhysRevE.72.011409 ↗
45. Microstructure determination of cement pastes by NMR and conventional techniques10.1016/1065-7355(93)90011-C ↗
46. Surface relaxivity of cement hydrates10.1021/jp500055p ↗
47. Microstructure and texture of hydrated cement-based materials: A proton field cycling relaxometry approach10.1016/j.cemconres.2006.08.002 ↗
48. Modified spin-Echo method for measuring nuclear relaxation times10.1063/1.1716296 ↗
49. Effect of drying procedures on pore structure and phase evolution of alkali-activated cements10.1016/j.cemconcomp.2018.12.003 ↗
50. Determination of cement hydration and pozzolanic reaction extents for fly-ash cement pastes10.1016/j.conbuildmat.2011.07.007 ↗
51. The degree of hydration assessment of blended cement pastes by differential thermal and thermogravimetric analysis. Morphological evolution of the solid phases10.1016/j.tca.2014.08.008 ↗
52. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes10.1016/j.cemconres.2006.11.016 ↗
53. The determination of calcium hydroxide in set portland cements10.1016/0008-8846(79)90097-8 ↗
54. Determination of the free calcium hydroxide contents of hydrated Portland cements and calcium silicates10.1021/ac60175a020 ↗
55. Structural features of C-S-H(I) and its carbonation in air-A Raman spectroscopic study. Part II: Carbonated phases10.1111/j.1551-2916.2006.01429.x ↗
56. Carbonation of cement-based materials: Challenges and opportunities10.1016/j.conbuildmat.2016.05.080 ↗
57. An FTIR and XPS investigations of the effects of carbonation on the solidification/stabilization of cement based systems-Portland type V with zinc10.1016/0008-8846(93)90031-4 ↗
58. Investigation of blended cement hydration by isothermal calorimetry and thermal analysis10.1016/j.cemconres.2004.10.027 ↗
59. CaCl2-accelerated hydration of tricalcium silicate: A STXM study combined with 29Si MAS NMR10.1155/2015/215371 ↗
60. Hydration kinetics and microstructure development of normal and CaCl2-accelerated tricalcium silicate pastes10.1021/jp907078u ↗
61. Early hydration and microstructure formation of Portland cement paste studied by oscillation rheology, isothermal calorimetry, 1H NMR relaxometry, conductance and SAXS10.1016/j.cemconres.2020.105977 ↗
62. Morphology of cementitious material during early hydration10.1016/j.cemconres.2018.02.004 ↗
63. Investigation of pozzolanic reaction in nanosilica-cement blended pastes based on solid-state kinetic models and29SI MAS NMR10.3390/ma9020099 ↗
64. Location of aluminum in substituted calcium silicate hydrate (C-S-H) gels as determined by 29Si and 27Al NMR and EELS10.1111/j.1151-2916.1993.tb07765.x ↗
65. Electrophoretic nuclear magnetic resonance measurement of electroosmotic flow and dispersion in hydrating cement paste10.1016/j.cemconres.2018.10.028 ↗