Experimental study on mechanical properties, hydration kinetics, and hydration product characteristics of aeolian sand paste-like materials
Source abstract
Abstract
Abstract Using fly ash (FA), aeolian sand (AS), cement, and mixing water as filling materials for making the paste-like filling mining can not only effectively control the surface subsidence and solve the “three-underground mining” coal pressure but also solve the environmental problems caused by the solid wastes, so as to realize the sustainable utilization of solid waste. The utilization of a large amount of AS resources can control land desertification, and the sale of aeolian sand can bring considerable economic benefits to Yuyang district. Hence, in this study, different ASPM samples were produced by varying the content of FA (0–30 wt%) and the curing times (3, 7, 14 and 28 days). The mechanical strength test, hydration kinetics test and microscopic test of aeolian sand paste-like materials (ASPM) was studied. The results showed that, according to the typical underground mining, the uniaxial compressive strength (UCS) of the backfill, cured for 28 days, was generally between 0.7 and 2.0 MPa, which can provide good roof support. In this study, the minimum strength of the ASPM reached 4.43 MPa (C-FA0), so the ASPM met the requirements of strength performance. Secondly, the hydration exothermic process of ASPM was divided into five different stages, and the influence of FA content on hydration kinetics was analyzed. For example, in the acceleration stage of ASPM, there was a positive correlation between the FA content, exothermic heat, and exothermic rate. The possible reason was that the particle size of FA was finer than that of AS, and the hydration reaction was more sufficient. In addition, the microscopic morphology and the characteristics of hydration products of ASPM were also studied. It is an important prerequisite for industrial field practice to study the mechanical properties, hydration characteristics and hydration product of ASPM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tailings Management and Properties · Rock Mechanics and Modeling · Mining and Resource Management
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Resource and environment harmonics (green) mining and its technical system
2. Application of solid backfilling to reduce hard-roof caving and longwall coal face burst potential10.1016/j.ijrmms.2016.07.025 ↗
3. Loading rate effect on the uniaxial compressive strength (UCS) behavior of cemented paste backfill (CPB)10.1016/j.conbuildmat.2020.121526 ↗
4. Flowability of ultrafine-tailings cemented paste backfill incorporating superplasticizer: insight from water film thickness theory10.1016/j.powtec.2020.12.035 ↗
5. Effects of binder type and dosage on the mode I fracture toughness of cemented paste backfill-related structures10.1016/j.conbuildmat.2020.121854 ↗
6. Study on the pressure-bearing law of backfilling material based on three-stage strip backfilling mining10.3390/en13010211 ↗
7. Mechanized filling and water-preserving coal mining technology and practice of aeolian sand-like paste
8. Reuse of mining waste as aggregates in fly ash-based geopolymers10.1016/j.jclepro.2019.02.164 ↗
9. Experimental characterization of the influence of solid components on the rheological and mechanical properties of cemented paste backfill10.1016/j.minpro.2017.09.019 ↗
10. Mechanical properties, shrinkage, and heat evolution of alkali activated fly ash concrete10.1016/j.conbuildmat.2021.123954 ↗
11. Experimental investigation of mechanical, hydration, microstructure and electrical properties of cemented paste backfill10.1016/j.conbuildmat.2020.120137 ↗
12. Microcalorimetric test and analysis of hydration heat of fly ash paste-filling material
13. Analysis of correlation between hydration heat release and compressive strength for blended cement pastes10.1016/j.conbuildmat.2020.120436 ↗
14. Hydration kinetics of composite binder containing different content of slag or fly ash
15. Experimental investigation on some performance of rubber fiber modified cemented paste backfill10.1016/j.conbuildmat.2020.121586 ↗
16. Reutilisation of coal gangue and fly ash as underground backfill materials for surface subsidence control10.1016/j.jclepro.2020.120113 ↗
17. Carbon sequestration in cementitious composites using biochar and fly ash-effect on mechanical and durability properties10.1016/j.conbuildmat.2021.123363 ↗
18. Application of rice husk biochar as filler in cenosphere modified mortar: preparation, characterization and performance under elevated temperature10.1016/j.conbuildmat.2020.119083 ↗
19. Effect of temperature on time-dependent rheological and compressive strength of fresh cemented paste backfill containing flocculants10.1016/j.conbuildmat.2020.121038 ↗
20. Effectiveness of fly ash in reducing the hydration heat release of mass concrete
21. An experimental study on the early-age hydration kinetics of cemented paste backfill10.1016/j.conbuildmat.2019.03.322 ↗
22. Effect of tailings fineness on flow, strength, ultrasonic and microstructure characteristics of cemented paste backfill10.1016/j.conbuildmat.2020.120645 ↗
23. Additivity effect on properties of cemented coal fly ash backfill containing water-reducing admixtures10.1016/j.conbuildmat.2020.121021 ↗
24. Effect of mixing time on hydration kinetics and mechanical property of cemented paste backfill10.1016/j.conbuildmat.2020.118516 ↗
25. Mechanical properties and microstructure of layered cemented paste backfill under triaxial cyclic loading and unloading10.1016/j.conbuildmat.2020.119540 ↗
26. Effects of red mud additions on gangue-cemented paste backfill properties10.1016/j.powtec.2020.03.055 ↗
27. Strength development and microstructural investigation of lead-zinc mill tailings based paste backfill with fly ash as alternative binder10.1016/j.cemconcomp.2020.103553 ↗
28. External shapes, strain rates, and dynamics of saltstructures10.1130/0016-7606(1986)97<305:ESSRAD>2.0.CO;2 ↗
29. ASTM C618, Standard specification for coal fly ash and raw or calcined Natural pozzolan for use in concrete, 2019.
30. Study on rheological and mechanical properties of aeolian sand-fly ash-based filling slurry10.3390/en13051266 ↗
31. Relationship between engineering performance and mix proportion of fly ash for cemented and high concentration backfill material with wind-blown sand as aggregate
32. Effects of superplasticizer on rheological properties of cemented paste backfills10.1016/j.minpro.2017.02.003 ↗
33. Effect of mineral admixtures on flow properties of fresh cemented paste backfill: assessment of time dependency and thixotropy10.1016/j.powtec.2020.06.009 ↗
34. Pore and strength characteristics of cemented paste backfill using sulphide tailings: effect of sulphur content10.1016/j.conbuildmat.2019.117452 ↗
35. GB/T 50081, Standard for test method of mechanical properties on ordinary concrete, 2003.
36. Evaluation method of cement hydration degree in composite cementing material based on Ca(OH)2 content
37. Mehta · 2016
38. Qian · 2002
39. Influence of fly ash on early hydration and pore structure of cement pastes
40. Co-disposal of magnesium slag and high-calcium fly ash as cementitious materials in backfill10.1016/j.jclepro.2020.123684 ↗
41. Cemented paste backfill for mineral tailings management: review and future perspectives10.1016/j.mineng.2019.106025 ↗
42. The research of the hydration kinetics process and hydration mechanismof fly ash paste filling materials
43. Investigation into the synergistic effects in hydrated gelling systems containing fly ash, desulfurization gypsum and steel slag10.1016/j.conbuildmat.2018.07.241 ↗
44. 29Si polymerization degree of hydrates in coal gangue added cement