Evolution of room-cured alkali-activated silicomanganese fume-based green mortar designed using Taguchi method
Source abstract
Abstract
Abstract This paper presents the results of a study conducted to synthesize alkali-activated mortars (AAMs) at room temperature. The AAMs were prepared using silicomanganese fume (SiMnF) and ground granulated blast furnace slag (GGBFS) as precursor materials (PMs) and sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) as alkaline activators (AAs). The composition of the AAMs was designed and optimized using the Taguchi method. Five factors with four levels each were investigated in this study, including the ratio of GGBFS to PMs (0–4.5), sand to PMs ratio (1.5–2.4), molarity of NaOH (4–10 M), Na2SiO3/NaOH ratio (2–3.5) and AAs to PMs ratio (1.5–2.4). Based on the orthogonal array proposed by the Taguchi method, 16 AAMs were cast with varying flow and unit weight to evaluate the compressive strength at 3, 7 and 28 days. The strength data was statistically analysed by employing ANOVA and response surface methods to investigate the effect of experimental variables. AAM with 30:70 proportion of GGBFS and SiMnF, Na2SiO3/10 MNaOH of 2.5, AAs/PMs ratio of 0.5 and sand to PMs ratio of 1.5 attained optimum strength. Based on the SEM and EDS analysis, the molar ratios among the major constituent elements intertwined in the cemented matrix were established which contributed to the formation of alkaline products and microstructural densification of the optimum mixture.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Geopolymeric concretes for environmental protection
2. Synthesis and attributes of nano-SiO2 local metakaolin based-geopolymer10.1016/j.jobe.2020.101586 ↗
3. Optimization of geopolymer mortar incorporating heavy metals in producing dense hybrid composites10.1016/j.jobe.2020.101684 ↗
4. Assessment of geopolymer composites durability at one year age10.1016/j.jobe.2020.101453 ↗
5. Effect of precursor combination and elevated temperatures on the microstructure of alkali-activated binder
6. A mix design procedure for alkali-activated high-calcium fly ash concrete cured at ambient temperature10.1155/2018/2460403 ↗
7. Glasby · Concrete Aircraft Pavements at Brisbane West Wellcamp Airport · 2015
8. Alkali-activated binders by use of industrial by-products10.1016/j.cemconres.2004.06.019 ↗
9. Supplementary cementitious materials origin from agricultural wastes–A review10.1016/j.conbuildmat.2014.10.010 ↗
10. Recent advancements in the use of biochar for cementitious applications: A review10.1016/j.jobe.2020.101705 ↗
11. IMnI, International Manganese Institute, (2018).
12. Silico-manganese fumes waste encapsulated cryogenic alginate beads for aqueous environment de-colorization10.1016/j.jclepro.2019.118867 ↗
13. The utilization of steelmaking industrial waste of silicomanganese fume as filtration loss control in drilling fluid application
14. J.H. Freeland-Graves, T.Y. Mousa, N. Sanjeevi, Nutritional requirements for manganese, in: Manganese Heal. Dis., Royal Society of Chemistry, 2014: pp. 34–75.10.1039/9781782622383-00034 ↗
15. WHO, Agency for toxic substances and disease registry, Toxicol. Profile Polycycl. Aromat. Hydrocarb. PB/95/264370. Atlanta US Dep. Heal. Hum. Serv. (2000).
16. J.P. Lodge Jr, Air quality guidelines for Europe: WHO regional publications, European series, No. 23, World Health Organization, 1211 Geneva 27, Switzerland; WHO publications center USA, 49 Sheridan Avenue, Albany, NY 12210, 1987, xiii+ 426 pp. price: Sw. fr. 60, (1988).
17. Neurological risks associated with manganese exposure from welding operations–a literature review10.1016/j.ijheh.2008.12.003 ↗
18. Neurobehavioral deficits and parkinsonism in occupations with manganese exposure: a review of methodological issues in the epidemiological literature10.1016/j.shaw.2013.07.003 ↗
19. Manganese-induced Parkinsonism and Parkinson’s disease: shared and distinguishable features10.3390/ijerph120707519 ↗
20. Todd · 2003
21. Characterization of manganese-bearing particles in the vicinities of a manganese alloy plant10.1016/j.chemosphere.2017.02.056 ↗
22. Synthesis of low temperature cured alkaline activated silicomanganese fume mortar10.1016/j.conbuildmat.2018.12.056 ↗
23. Magnesium sulfate resistance of alkali / slag activated silico-manganese fume-based composites10.1016/j.conbuildmat.2020.120851 ↗
24. Influence of heat curing period and temperature on the strength of silico-manganese fume-blast furnace slag-based alkali-activated mortar10.1016/j.conbuildmat.2020.118961 ↗
25. Sodium sulfate resistance of alkali / slag activated silico – manganese fume-based composites
26. Impact of slag content and curing methods on the strength of alkaline-activated silico-manganese fume/blast furnace slag mortars10.1007/s13369-019-04063-7 ↗
27. Synthesis of alkali-activated binary blended silico-manganese fume and ground blast furnace slag mortar10.3151/jact.17.728 ↗
28. Sulfuric acid resistance of alkali/slag activated silico-manganese fume-based mortars
29. M. Nasir, M. Azmi, M. Johari, M.O. Yusuf, M. Maslehuddin, M.A. Al Harthi, Effect of alkaline activators on the fresh properties and strength of silico - manganese fume - slag activated mortar, 10 (2020) 403–416. 10.12989/acc.2020.10.5.403.
30. Production geopolymers by Portland cement: Designing the main parameters’ effects on compressive strength by Taguchi method10.1016/j.matdes.2012.04.045 ↗
31. Split tensile strength of OPC-based geopolymers: Application of DOE method in evaluating the effect of production parameters and their optimum condition10.1016/j.ceramint.2014.03.094 ↗
32. Synthesis of geopolymer from large amounts of treated palm oil fuel ash: Application of the Taguchi method in investigating the main parameters affecting compressive strength10.1016/j.conbuildmat.2013.11.039 ↗
33. Optimization of alkali-activated mortar utilizing ground granulated blast-furnace slag and natural pozzolan from Germany with the dynamic approach of the Taguchi method10.1016/j.conbuildmat.2017.03.189 ↗
34. Analysis of some engineering properties of mortars containing steel scale using Taguchi based grey method10.1016/j.jobe.2019.101015 ↗
35. Optimal conditions of porous ceramic membrane synthesis based on alkali activated blast furnace slag using Taguchi method10.1016/j.ceramint.2017.07.197 ↗
36. Alternative by-product based binders for cemented mine backfill: Recipes optimisation using Taguchi method10.1016/j.mineng.2011.12.010 ↗
37. Reaction kinetics, reaction products and compressive strength of ternary activators activated slag designed by Taguchi method10.1016/j.matdes.2015.07.077 ↗
38. Compressive strength of ash-based geopolymers at early ages designed by Taguchi method10.1016/j.matdes.2012.01.030 ↗
39. Development of eco-friendly basalt fibre reinforced cementitious composites using Taguchi method10.1007/s12633-020-00532-z ↗
40. Influence of various parameters on strength and absorption properties of fly ash based geopolymer concrete designed by Taguchi method10.1016/j.conbuildmat.2017.06.066 ↗
41. Properties of fly ash geopolymer concrete designed by Taguchi method10.1016/j.matdes.2011.10.036 ↗
42. Design of geopolymer concrete with GGBFS at ambient curing condition using Taguchi method10.1016/j.conbuildmat.2017.02.131 ↗
43. Ross · 1988
44. Taguchi · 2005
45. Shi · 2006
46. Evolution of binder structure in sodium silicate-activated slag-metakaolin blends10.1016/j.cemconcomp.2010.09.004 ↗
47. Fire-resistant geopolymer produced by granulated blast furnace slag10.1016/S0892-6875(03)00008-6 ↗
48. Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag - Part I: Effect of MgO
49. Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements10.1680/adcr.2003.15.3.129 ↗
50. Effect of curing conditions on the compressive strength of sodium carbonate activated slag-glass powder mortar
51. Role of slag in microstructural development and hardening of fly ash-slag geopolymer10.1016/j.cemconres.2012.10.004 ↗
52. Pore solution chemistry of alkali-activated ground granulated blast-furnace slag10.1016/S0008-8846(98)00212-9 ↗
53. Effect of activator concentration on the strength, ITZ and drying shrinkage of fly ash/slag geopolymer concrete10.1016/j.conbuildmat.2016.05.008 ↗
54. Performance and sustainability overview of alkali-activated self-compacting concrete
55. The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature10.1016/j.matdes.2014.05.001 ↗
56. Impacts of silica modulus on the early strength of alkaline activated ground slag/ultrafine palm oil fuel ash based concrete10.1617/s11527-014-0318-3 ↗
57. Effect of activator type and content on properties of alkali-activated slag mortars10.1016/j.compositesb.2013.10.001 ↗
58. Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA-GBFS geopolymer10.1016/j.conbuildmat.2015.05.001 ↗
59. Alkaline solution/binder ratio as a determining factor in the alkaline activation of aluminosilicates10.1016/j.cemconres.2012.05.019 ↗
60. Hardening mechanisms of an alkaline-activated class F fly ash10.1016/S0008-8846(01)00571-3 ↗
61. The effect of composition and temperature on the properties of fly ash- and kaolinite-based geopolymers10.1016/S1385-8947(02)00025-6 ↗
62. Microstructural and mechanical properties of alkali activated Colombian raw materials10.3390/ma9030158 ↗
63. Mechanism of geopolymerization and factors influencing its development: a review10.1007/s10853-006-0401-4 ↗