Synergies on rheology and structural build-up of fresh cement pastes with nanoclays, nanosilica and viscosity modifying admixtures
Source abstract
Abstract
Nanoclays, nanosilica and viscosity modifying admixtures can be used to tune rheological properties of cement pastes, in order to fulfill the requirements for non-conventional cast-in-place techniques. An experimental study on cement paste rheology was carried out to evaluate their combined effects on fluid cement pastes’ properties. A reference paste with cement blended with limestone filler and a low water to binder ratio was designed. A high range water reducing admixture (HRWRA), three types of viscosity modifying admixtures (VMA), and five nanocomponents (nanosilica and four different nanoclays) were added. Flowability, initial rheological properties and structural build-up of cement pastes were assessed with mini-cone slump test and dynamic shear rheometer test (DSR). The synergies between nanoclays, nanosilica and VMAs were evaluated. It was observed that an adequate combination of admixtures and nanoclays reduced the amount of HRWRA required to achieve target flowability, regarding the same components uncombined. The type and amount of VMAs and nanocomponents also produced changes on yield stress, viscosity and structural build-up. Their effect on structural build-up of fresh paste was related to reversible and non-reversible mechanisms, comparing the reduction of spread diameter of fresh samples stirred and left at rest over time measured with the mini-cone.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research · Nanotechnology research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. T. Wangler, E. Lloret, L. Reiter, N. Hack, F. Gramazio, M. Kohler, M. Bernhard, B. Dillenburger, J. Buchli, N. Roussel, R. Flatt, Digital concrete: opportunities and challenges. RILEM Tech. Lett. (2016) 67–75. 10.21809/rilemtechlett.2016.16.10.21809/rilemtechlett.2016.16 ↗
2. N. Roussel, Rheological requirements for printable concretes, Cem. Concr. Res. 112 (2018) 76-85. 10.1016/j.cemconres.2018.04.005.10.1016/j.cemconres.2018.04.005 ↗
3. Perrot · 2019 · 41
4. Recent advances on yield stress and elasticity of fresh cement-based materials10.1016/j.cemconres.2019.105798 ↗
5. A thixotropy model for fresh fluid concretes: theory, validation and applications10.1016/j.cemconres.2006.05.025 ↗
6. The origins of thixotropy of fresh cement pastes10.1016/j.cemconres.2011.09.004 ↗
7. Prediction of lateral form pressure exerted by concrete at low casting rates10.1617/s11527-014-0313-8 ↗
8. Effectiveness of the rheometric methods to evaluate the build-up of cementitious mortars used for 3D printing10.1016/j.conbuildmat.2020.119551 ↗
9. Non-linear modeling of yield stress increase due to SCC structural build-up at rest10.1016/j.cemconres.2016.11.020 ↗
10. Investigating the working mechanisms of viscosity-modifying admixtures through rheological and water transport properties10.1061/(ASCE)MT.1943-5533.0003018 ↗
11. H. Varela, G. Barluenga, I. Palomar, Rheology Evaluation of Cement Paste with Nanoclays, Nanosilica and Polymeric Admixtures for Digital Fabrication. In: F. Bos, S. Lucas, R. Wolfs, T. Salet (eds) Second RILEM International Conference on Concrete and Digital Fabrication DC 2020, RILEM Bookseries, Springer, 2020, pp. 144-152. 10.1007/978-3-030-49916-7_15.10.1007/978-3-030-49916-7_15 ↗
12. Influence of nanoclays on flowability and rheology of SCC pastes10.1016/j.conbuildmat.2020.118285 ↗
13. Identifying viscosity of cement paste from mini-slump-flow test
14. R. Ferron, A. Gregori, Z. Sun, S.P. Shah, Rheological Method to Evaluate Structural Build-Up in Self-Consolidating Concrete Cement Paste, ACI Mater. J. 104:3 (2007) 242-250. https://doi.org/10.14359-18669.10.14359/18669 ↗
15. Rate of thixotropic rebuilding of cement pastes modified with highly purified attapulgite clays10.1016/j.cemconres.2013.05.019 ↗
16. Modification of cement-based materials with nanoparticles10.1016/j.cemconcomp.2012.06.012 ↗
17. Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay10.1016/j.compositesb.2018.11.109 ↗
18. Khayat · 2012 · 209
19. Compatibility of viscosity-enhancing agents and superplasticizers in cementitious and model systems: rheology, bleeding and segregation
20. Working mechanism of viscosity-modifying admixtures
21. Working mechanism of methyl hydroxyethyl cellulose (MHEC) as water retention agent10.1016/j.cemconres.2012.03.016 ↗
22. Effect of polyacrylamide on rheology of fresh cement pastes10.1016/j.cemconres.2015.05.012 ↗
23. Polyacrylamide induced flocculation of a cement suspensión10.1016/j.ces.2005.11.013 ↗
24. Competitive adsorption and interaction between sodium alginate and polycarboxylate superplasticizer in fresh cement paste10.1016/j.colsurfa.2019.124249 ↗
25. Hydration and rheology control of concrete for digital fabrication: potential admixtures and cement chemistry10.1016/j.cemconres.2018.05.014 ↗
26. Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE)10.1016/j.cemconres.2018.06.013 ↗
27. Aggregation and breakage kinetics of fresh cement paste10.1016/j.cemconres.2013.03.002 ↗
28. A study on the impact of different clay minerals on the dispersing force of conventional and modified vinyl ether based polycarboxylate superplasticizers10.1016/j.cemconres.2014.02.009 ↗
29. Interaction mechanisms between Na-montmorillonite clay and MPEG-based polycarboxylate superplasticizers10.1016/j.cemconres.2012.03.005 ↗
30. Influence of bentonite clay on the rheological behaviour of fresh mortars10.1016/j.cemconres.2011.01.002 ↗
31. Effects of colloidal nanosilica on rheological and mechanical properties of fly ash–cement mortar10.1016/j.cemconcomp.2012.08.027 ↗
32. Effect of nano-silica on rheology and fresh properties of cement pastes and mortars10.1016/j.conbuildmat.2009.02.005 ↗
33. Effect of viscosity type modifying admixture on porosity, compressive strength and water penetration of high performance self-compacting concrete10.1016/j.conbuildmat.2013.07.076 ↗
34. I. Palomar, G. Barluenga, C. Guardia, M.C. Alonso, M. Álvarez, Rheological Characterization of Self-compacting Concrete Pastes with Polymeric Admixtures. In: V. Mechtcherine, K. Khayat, E. Secrieru (eds.), Rheology and Processing of Construction Materials. RheoCon 2019, SCC 2019. RILEM Bookseries, Springer, 2020, pp.491-499. 10.1007/978-3-030-22566-7_57.10.1007/978-3-030-22566-7_57 ↗
35. Guidelines for Viscosity Modifying Admixtures for Concrete. In co-operation with EFCA. The European Federation of Concrete Admixture Associations; 2006.
36. From mini-cone test to Abrams cone test: measurement of cement-based materials yield stress using slump tests10.1016/j.cemconres.2004.07.032 ↗
37. Fifty-cent rheometer for yield stress measurements: from slump to spreading flow10.1122/1.1879041 ↗
38. On the identification of rheological properties of cement suspensions: rheometry, computational fluid dynamics modeling and field test measurements10.1016/j.cemconres.2012.05.007 ↗
39. Estimation of rheological properties of UHPC using mini slump test10.1016/j.conbuildmat.2015.12.106 ↗
40. Performance-based design and optimization of rheological and strength properties of self-compacting cement composite incorporating micro/nano admixtures10.1016/j.compositesb.2019.01.028 ↗
41. Effect of vane configuration on yield stress measurements of cement pastes10.1016/j.jnnfm.2016.01.002 ↗
42. Measuring rheological properties of cement pastes: most common techniques, procedures and challenges10.21809/rilemtechlett.2017.43 ↗
43. On the measurement of evolution of structural build-up of cement paste with time by static yield stress test vs. small amplitude oscillatory shear test10.1016/j.cemconres.2017.05.014 ↗
44. M. Thiedeitz, N. Habib, T. KränkelGehlen, C. L-Box Form Filling of Thixotropic Cementitious Paste and Mortar. Materials. 13 (2020) 1760. https://doi.org/10.3390/ma13071760.10.3390/ma13071760 ↗
45. G. Barluenga, I. Palomar, C. Guardia, H. Varela, F. Hernandez-Olivares, Rheology and Build-Up of Fresh SCC Pastes Evaluated with the Mini-slump Cone Test. In: V. Mechtcherine, K. Khayat, E. Secrieru (eds.), Rheology and Processing of Construction Materials. RheoCon 2019, SCC 2019. RILEM Bookseries, Springer, 2020, pp. 160-167. 10.1007/978-3-030-22566-7_19.10.1007/978-3-030-22566-7_19 ↗
46. Extension of the Reiner-Riwlin equation to determine modified Bingham parameters measured in coaxial cylinders rheometers10.1617/s11527-012-9902-6 ↗
47. Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries10.1617/s11527-020-01477-w ↗